Synthesis of New Pyrimidine,Quinazoline and Diazatricyclo Derivatives by Multicomponent Reaction and Evaluation of Their Biological Activity

Abstract

A series of new pyrimidine and quinazoline derivatives was synthesized by a Biginelli-like reaction of urea/thiourea, aldehyde, and ketone in the presence of hydrochloric acid as a catalyst. In a similar way, some novel diazatricyclo derivatives were obtained via a Biginelli-like reaction followed by an intramolecular Michael-type addition. The yields of products were reasonable after recrystallization from ethanol. All newly synthesized compounds were characterized using IR and NMR (¹H and ¹³C) spectroscopy and elemental analysis. The antibacterial activity of these compounds was investigated against Staphylococcus aureus (RTCC, 1885), and Escherichia Coli (ATCC, 35922).

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis of α-aminonitriles using silica-bonded N-propylpiperazine sulfamic acid as a recyclable catalyst

<正>α-Aminonitriles were synthesized via a one-pot three-component condensation of aldehydes,amines,and trimethylsilyl cyanide using silica-bonded N-propylpiperazine sulfamic acid(SBPPSA) as a recyclable solid acid at room temperature.SBPPSA showed much the same efficiency when used in consecutive reaction runs.     

硅胶键合N-丙基二乙烯氨基磺酸作为可回收固体酸催化剂催化合成α-氨基腈(英文)

Silica-bonded N-propyl diethylenetriamine sulfamic acid (SBPDSA) is employed as a recyclable catalyst to synthesize α-aminonitriles. These syntheses involved one-pot condensation of an aldehyde, an amine, and trimethylsilyl cyanide under mild reaction conditions at room temperature. SBPDSA was recycled seven times in the condensation of benzaldehyde, aniline, and trimethylsilyl cyanide without reduction of its catalytic activity.     

1,3-Migration of Trimethylsilyl Group from Carbon to Oxygen in Highly Sterically Hindered Silanol of the Type (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH and Reaction of the Related Iodide with Iodine Monochloride and Iodine Monobromide

The silanol (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH has been shown to isomerize to (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) when it was kept at room temperature for 10 h in 0.2 M NaOMe/MeOH. Corresponding isomerizations of the above silanol (to give (Me 3 Si) 2 CHSi(C 6 H 4 Me- p ) (Me)(OSiMe 3 )) are complete after 26 h under reflux in pyridine. The reaction involve 1,3-migration from carbon to oxygen within a silanolate ion to give a carbanion, which rapidly acquires a proton from the solvent. Treatment of (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH with MeLi in Et 2 O/THF give, by the same rearrangement, the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) which on treatment with Me 2 SiHCl gives (Me 3 Si) 2 C(SiMe 2 H)Si(C 6 H 4 Me- p )(Me)(OSiMe 3 ) and (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). When the experiment was repeated, but with Me 3 SiCl in place of Me 2 SiHCl, it gives exclusively (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). Treatment of the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) with Mel gives exclusively (Me 3 Si) 2 CMeSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). The related iodide (Me 3 Si) 3 CSi(C 6 H 4 Me- p )Mel reacts with ICI and IBr to give rearranged (Me 3 Si) 2 C(SiMe 2 X)Si(C 6 H 4 Me- p )Me 2 and unrearranged products (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeX, (X = Cl, Br) respectively. The rearranged bromide (Me 3 Si) 2 C(SiMe 2 Br)Si(C 6 H 4 Me- p )Me 2 reacts with a range of silver [I] salts AgY (Y = OOCCH 3 , SO 4 2 m ) and Mercury [II] salt HgY 2 (Y = OOCCH 3 , SO 4 2 m ) in glacial CH 3 COOH to give the corresponding species (Me 3 Si) 2 C(SiMe 2 OOCCH 3 )Si(C 6 H 4 Me- p )Me 2 . The reaction of the bromide with AgBF 4 in MeOH or i -PrOH give the corresponding rearranged products (Me 3 Si) 2 C(SiMe 2 Y)Si(C 6 H 4 Me- p )Me 2 (Y = --OMe, --OPr i ).     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Evaluation of fuzzy regression models by fuzzy neural network

In this paper, a novel hybrid method based on fuzzy neural network for approximate fuzzy coefficients (parameters) of fuzzy linear and nonlinear regression models with fuzzy output and crisp inputs, is presented. Here a neural network is considered as a part of a large field called neural computing or soft computing. Moreover, in order to find the approximate parameters, a simple algorithm from the cost function of the fuzzy neural network is proposed. Finally, we illustrate our approach by some numerical examples.     

Fuzzy polynomial regression with fuzzy neural networks

Recently, fuzzy linear regression is considered by Mosleh et al. [1]. In this paper, a novel hybrid method based on fuzzy neural network for approximate fuzzy coefficients (parameters) of fuzzy polynomial regression models with fuzzy output and crisp inputs, is presented. Here a neural network is considered as a part of a large field called neural computing or soft computing. Moreover, in order to find the approximate parameters, a simple algorithm from the cost function of the fuzzy neural network is proposed. Finally, we illustrate our approach by some numerical examples.     

Monodisperse silica nanoparticles coated with gold nanoparticles as a sorbent for the extraction of phenol and dihydroxybenzenes from water samples based on dispersive micro‐solid‐phase extraction: Response surface methodology

A selective and sensitive method was developed based on dispersive micro‐solid‐phase extraction for the extraction of hydroquinone, resorcinol, pyrocatechol and phenol from water samples prior to high‐performance liquid chromatography with UV detection. SiO₂, SiO₂@MPTES, and SiO₂@MPTES@Au nanoparticles (MPTES = 3‐mercaptopropyltriethoxysilane) were synthesized and characterized by scanning electronic microscopy, thermogravimetric analysis, differential thermogravimetric analysis, and infrared spectroscopy. Variables such as the amount of sorbent (mg), pH and ionic strength of sample the solution, the volume of eluent solvent (μL), vortex and ultrasonic times (min) were investigated by Plackett–Burman design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under optimized conditions, the calibration graphs of phenol and dihydroxybenzenes were linear in a concentration range of 1–500 μg/L, and with correlation coefficients more than 0.995. The limits of detection for hydroquinone, resorcinol, pyrocatechol, and phenol were 0.54, 0.58, 0.46, and 1.24 μg/L, and the limits of quantification were 1.81, 1.93, 1.54, and 4.23 μg/L, respectively. This procedure was successfully employed to determine target analytes in spiked water samples; the relative mean recoveries ranged from 93.5 to 98.9%.     

Shape control of nanostructured TiO2 using a Schiff base ligand via sol–gel hydrothermal method

Employing a Schiff base ligand in a hydrothermal sol–gel method for preparation of TiO₂ nanostructures was studied. The as-prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrum, electron dispersive X-ray spectroscopy and ultraviolet–visible spectroscopy. It is shown that in the controlled reaction conditions, a Schiff base ligand containing hard atoms is capable of driving the growth mechanism in a way that anisotropic shapes of TiO₂ nanostructures are formed. Considering the structure of the Schiff base ligand, the possible growth mechanism of TiO₂ nanostructures is proposed. The optical studied as well as calculated molecular orbital structure of ligand by density functional theory is done.