Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Isocratic mixed mode liquid chromatographic separation of phospholipids with octadecylsilane-silica stationary phases

Molecular species of phosphatidylcholine, phosphatidylethanolamine and phosphatadic acid were resolved by isocratic reversed phase high performance liquid chromatography (HPLC) using mobile phases of methanol-isopropanol containing para-toluenesulfonic acid (p-tsa). Separation by both non-polar fatty acid chain length and by polar head group functionality was achieved concurrently upon a commercially available octadecylsilane (C18) column endcapped with trimethylsilane (C1) groups. Using a mobile phase of 97.5:2.5 methanol:isopropanol with 7OmMpara-toluenesulfonic acid (p-tsa) at a pH of approximately 1, twelve phospholipid species comprised of four tail group classes (dilauroyl-,dimyristoyl-, dipamitoyl- and distearoyl-) and three head group speciations (phosphatidylcholine, phosphatidylethanolamine and phosphatadic acid) were separated. The column was then exposed to the acidic mobile phase for 48 hours continuously during which the bound phase underwent severe acid-induced hydrolysis, after which the separation of the twelve analytes resulted in the separation of the phospholipid species by non-polar tail group alone. The experimental results are discussed in terms of potential separation mechanisms including dependency of the separation on adsorption of the counter ion into the stationary phase, residual acidic silanol group interactions, and potential interactions of the surface active phospholipids with C1 groups.     

Classification of gasoline data obtained by gas chromatography using a piecewise alignment algorithm combined with feature selection and principal component analysis

A fast and objective chemometric classification method is developed and applied to the analysis of gas chromatography (GC) data from five commercial gasoline samples. The gasoline samples serve as model mixtures, whereas the focus is on the development and demonstration of the classification method. The method is based on objective retention time alignment (referred to as piecewise alignment) coupled with analysis of variance (ANOVA) feature selection prior to classification by principal component analysis (PCA) using optimal parameters. The degree-of-class-separation is used as a metric to objectively optimize the alignment and feature selection parameters using a suitable training set thereby reducing user subjectivity, as well as to indicate the success of the PCA clustering and classification. The degree-of-class-separation is calculated using Euclidean distances between the PCA scores of a subset of the replicate runs from two of the five fuel types, i.e., the training set. The unaligned training set that was directly submitted to PCA had a low degree-of-class-separation (0.4), and the PCA scores plot for the raw training set combined with the raw test set failed to correctly cluster the five sample types. After submitting the training set to piecewise alignment, the degree-of-class-separation increased (1.2), but when the same alignment parameters were applied to the training set combined with the test set, the scores plot clustering still did not yield five distinct groups. Applying feature selection to the unaligned training set increased the degree-of-class-separation (4.8), but chemical variations were still obscured by retention time variation and when the same feature selection conditions were used for the training set combined with the test set, only one of the five fuels was clustered correctly. However, piecewise alignment coupled with feature selection yielded a reasonably optimal degree-of-class-separation for the training set (9.2), and when the same alignment and ANOVA parameters were applied to the training set combined with the test set, the PCA scores plot correctly classified the gasoline fingerprints into five distinct clusters.     

Sequential injection analysis with dynamic surface tension detection High throughput analysis of the interfacial properties of surface-active samples

A sequential injection analysis (SIA) system is coupled with dynamic surface tension detection (DSTD) for the purpose of studying the interfacial properties of surface-active samples. DSTD is a novel analyzer based upon a growing drop method, utilizing a pressure sensor measurement of drop pressure. The pressure signal depends on the surface tension properties of sample solution drops that grow and detach at the end of a capillary tip. In this work, SIA was used for creating a reagent concentration gradient, and for blending the reagent gradient with a steady-state sample. The sample, consisting of either sodium dodecyl sulfate (SDS) or poly(ethylene glycol) at 1470 g mol⁻¹ (PEG 1470), elutes with a steady-state concentration at the center of the sample plug. Reagents such as Brij®35, tetrabutylammonium (TBA) hydroxide and β-cyclodextrin were introduced as a concentration gradient that begins after the sample plug has reached the steady-state concentration. By blending the reagent concentration gradient with the sample plug using SIA/DSTD, the kinetic surface pressure signal of samples mixed with various reagent concentrations is observed and evaluated in a high throughput fashion. It was found that the SIA/DSTD method consumes lesser reagent and required significantly less analysis time than traditional FIA/DSTD. Four unique chemical systems were studied with regard to how surface activity is influenced, as observed through the surface tension signal: surface activity addition, surface activity reduction due to competition, surface activity enhancement due to ion-pair formation, and surface activity reduction due to bulk phase binding chemistry.     

High-speed peak matching algorithm for retention time alignment of gas chromatographic data for chemometric analysis

A rapid retention time alignment algorithm was developed as a preprocessing utility to be used prior to chemometric analysis of large datasets of diesel fuel profiles obtained using gas chromatography (GC). Retention time variation from chromatogram-to-chromatogram has been a significant impediment against the use of chemometric techniques in the analysis of chromatographic data due to the inability of current chemometric techniques to correctly model information that shifts from variable to variable within a dataset. The alignment algorithm developed is shown to increase the efficacy of pattern recognition methods applied to diesel fuel chromatograms by retaining chemical selectivity while reducing chromatogram-to-chromatogram retention time variations and to do so on a time scale that makes analysis of large sets of chromatographic data practical. Two sets of diesel fuel gas chromatograms were studied using the novel alignment algorithm followed by principal component analysis (PCA). In the first study, retention times for corresponding chromatographic peaks in 60 chromatograms varied by as much as 300 ms between chromatograms before alignment. In the second study of 42 chromatograms, the retention time shifting exhibited was on the order of 10 s between corresponding chromatographic peaks, and required a coarse retention time correction prior to alignment with the algorithm. In both cases, an increase in retention time precision afforded by the algorithm was clearly visible in plots of overlaid chromatograms before and then after applying the retention time alignment algorithm. Using the alignment algorithm, the standard deviation for corresponding peak retention times following alignment was 17 ms throughout a given chromatogram, corresponding to a relative standard deviation of 0.003% at an average retention time of 8 min. This level of retention time precision is a 5-fold improvement over the retention time precision initially provided by a state-of-the-art GC instrument equipped with electronic pressure control and was critical to the performance of the chemometric analysis. This increase in retention time precision does not come at the expense of chemical selectivity, since the PCA results suggest that essentially all of the chemical selectivity is preserved. Cluster resolution between dissimilar groups of diesel fuel chromatograms in a two-dimensional scores space generated with PCA is shown to substantially increase after alignment. The alignment method is robust against missing or extra peaks relative to a target chromatogram used in the alignment, and operates at high speed, requiring roughly 1 s of computation time per GC chromatogram.     

Three-dimensional blow-up solutions of the Navier-Stokes equations

In this paper we extend the plane blow-up results of Grundy& McLaughlin (1997) to the three-dimensional Navier-Stokes equations.Using a solution structure originally due to Lin we first providenumerical evidence for the existence of blow-up solutions on- < x, z < , 0 y 1 with boundary conditions on y = 0and y = 1 involving derivatives of the velocity components.The formulation enables us to consider plane and radial flowas special cases. Various features of the computations are isolatedand are used to construct a formal asymptotic solution closeto blow-up. We show that the numerical and asymptotic analysesprovide a mutually consistent global picture which supportsthe conclusion that, for the family of problems we considerhere, blow-up in fact can take place in three dimensions butat an inverse linear rate rather than the faster inverse squareof the plane case.     

Flow injection in-valve-mini-column pretreatment combined with ion chromatography for cadmium, lead and zinc determination

A flow injection (FI) in-valve-mini-column packed with Chelex-100 resin is proposed for on-line sample pretreatment for some metal ions, namely, Cd(II), Pb(II) and Zn(II), prior to simultaneous determination using ion chromatography (IC). A solution containing a mixture of the cations was first passed through the in-valve-mini-column, followed by on-line elution. The eluate was then flowed further to an injection valve and was injected into an ion chromatograph. Conditions of the system were optimized. A single standard calibration was possible. The recoveries of cations were found to be in the range of 95–105%. The developed method was applied to the accurate analysis of zinc ore samples.     

Long-term retention of ice-nucleating active Pseudomonas fluorescens by overwintering colorado potato beetles

Ice nucleating-active Pseudomonas fluorescens F264C was fed to Colorado potato beetles to determine bacterial retentioin in the beetle gut and its effect on the cold hardiness of this insect pest. The bacrterium was present in beetles recovered after overwintering in the field, seven months after their exposure to P. fluorescens. Retention was evident not only in the detection of the P. fluorescens ice nucleating gene, inaW, in bacterial cultures from beetle guts but also in the elevated supercooling points of some treated beetles.     

Microbore liquid chromatography and refractive index gradient detection of low-nanogram and low-ppm quantities of carbohydrates

A refractive index gradient detector is presented as a universal detector in the microbore high-performance liquid chromatography analysis of carbohydrates. Simultaneously, low-ng and low-ppm injected quantities of carbohydrates were detected at the 3 x root-mean-square baseline noise level. A typical microbore high-performance liquid chromatography chromatogram separating fructose from sucrose followed by refractive index gradient (RIG) detection is reported. Use of a position sensitive detector (PSD) in the RIG detector design is reported and experimental considerations discussed. Optimization of the PSD-based RIG detector is addressed. Potential for the device in industrial and clinical applications is considered.