Programmed Temperature Vaporization Injection (PTV) in the Analysis by Gas Chromatography-Mass Spectrometry (GC-MS) of the Constituents of Landfill Gas

Abstract

Trace volatile compounds emitted from both domestic and industrial landfills have been identified by programmed temperature vaporization injection (PTV) coupled to gas chromatography with detection by ion-trap mass spectrometry (GC-ITD/MS). The PTV injection system has been developed using a combination of two six-port valves to achieve problems of interference in GC-MS while loading sample. A large volume of landfill gas was re-concentrated onto a sorbent trap, then rapidly liberated into the GC-ITD/MS system by programmed thermal desorption. Using this method, trace volatile compounds in gases from both domestic and industrial landfills such as aromatic hydrocarbons, terpenes, chlorinated hydrocarbons, and sulfur compounds can be identified and quantified.     

Injection by Programmed Temperature Vaporization Injection (PTV) of Gaseous Samples for Gas Chromatography – Atomic Emission Spectrometry (GC-AED)

Programmed temperature vaporization injection (PTV) coupled to gas chromatography and atomic emission detector (AED) has been studied for large volume injection of gaseous samples. As examples of the effectiveness of the technique, the results of the analysis of a series of headspace samples of foods such as garlic and onion, and of landfill gases are presented. The volumes of gaseous samples reconcentrated varied from a few milliliters up to liters depending on analyte dilution, through focusing onto a sorbent trap, then rapid liberation into the GC-AED system by programmed thermal desorption. Despite the high carrier gas flow rates associated with direct PTV-GC, AED performance and sensitivity were unaffected. The detailed elemental information obtained from the PTV-GC-AED analyses was confirmed using a PTV coupled to a gas chromatograph with ion trap detector mass spectrometer as detector (PTV-GC-ITD/MS).     

Optimisation of stability and charge transferability of ferrocene-encapsulated carbon nanotubes

Ferrocene-encapsulated carbon nanotubes (Fc@CNTs) became promising nanocomposite materials for a wide range of applications due to their superior catalytic, mechanical and electronic properties. To open up new windows of applications, the highly stable and charge transferable encapsulation complexes are required. In this work, we designed the new encapsulation complexes formed from ferrocene derivatives (FcR, where R = –CHO, –CH₂OH, –CON₃ and -PCl₂) and single-walled carbon nanotubes (SWCNTs). The influence of diameter and chirality of the nanotubes on the stability, charge transferability and electronic properties of such complexes has been investigated using density functional theory. The calculations suggest that the encapsulation stability and charge transferability of the encapsulation complexes depend on the size and chirality of the nanotubes. FcR@SWCNTs are more stable than Fc@SWCNTs at the optimum tube diameter. The greatest charge transfer was observed for FcCH₂OH@SWCNTs and Fc@SWCNTs since the Fe d levels of FcCH₂OH and Fc are nearly equal and close to the Fermi energy level of the nanotubes. The obtained results pave the way to the design of new encapsulated ferrocene derivatives which can give rise to higher stability and charge transferability of the encapsulation complexes.     

Analysis of Malodorous Sulfur Gases and Volatile Organometalloid Compounds in Landfill Gas Emissions Using Capillary Gas Chromatography with Programmed Temperature Vaporization Injection and Atomic Emission Detection

Volatile compounds containing Group V and Group VI elements in landfill gases are of concern as a source of toxic pollutants and unpleasant odors. Conventional analytical techniques for these compounds e.g. ICP-MS, ICP-AES are complicated, expensive and time consuming. The use of a simple programmed temperature vaporization injection (PTV) technique coupled to gas chromatography with atomic emission detection (GC-AED) has been successfully demonstrated to identify compounds containing arsenic, antimony, and sulfur in landfill gas. With an adapted PTV injection system (using a combination of a ten-port and a six-port Valco valves), problems associated with AED discharge tube damage due to high carrier gas flow rate during sample loading can be overcome. The gas samples generated from both a laboratory biowaste digester and a domestic landfill site were characterized using these techniques. Large sample gas volumes were adsorbed onto a cooled sorbent trap containing Porapak Q, followed by rapid liberation onto a porous layer open tubular column (PLOT) using programmed thermal desorption. Arsenic and antimony were also detected in the landfill leachate collected from the same landfill site using hydride generation-atomic absorption spectrometry (Hy-AAS). The efficiency of different traps has also been compared.     

Geometrical optics analysis for reduction of trapezoidal image distortion in a single prism-based optical fingerprint scanner

A single prism-based optical fingerprint scanner structure is mathematically analyzed by using geometrical optics approach. Important parameters including a tilting angle of the fingerprint accepting plane, a geometrical-optic distant difference, a trapezoidal image distortion, an object compression ratio, and an orientation of a two-dimensional image sensor are formulated for the first time in terms of all three angles of the prism and the prism material. In addition, based on our mathematical model, we propose to design all three angles of the prism in such a way that the plane accepting the fingertip observed from one side of the prism is normal to the optical axis of the system. In this way, the imaging plane is perpendicular to the optical axis, eliminating the trapezoidal image distortion and leading to ease of implementation. Experimental verification using three commercially available dispersion prisms made from three different glass materials and one prism based on our design concept shows that a prism with higher refractive index provides lower trapezoidal image distortion. The experimental data generally obeys our theoretical analysis.