Efficient synthesis of ferrocenylenones by Friedel-Crafts acylation with EtAlCl2-Me3Al

Efficient synthesis of ferrocenylenones using a Friedel-Crafts acylation reaction is described. Acryloyl, methacryloyl, crotonoyl, cinnamoyl, and β-methylcrotonoyl chlorides react with ferrocene in the presence of a Lewis acid (EtAlCl₂ or EtAlCl₂-Me₃Al) to give the corresponding ferrocenylenones (acryloyl, methacryloyl, crotonoyl, cinnamoyl, and methylcrotonoylferrocenes) in good isolated yields. Besides ferrocenylenones, chloroactylferrocene is also synthesised by this method.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Enantio- and Diastereoselective Aldol-Reaction of 2,6-Dimethylphenyl Propionate Using Titanium-Carbohydrate Complexes

Chloro(cyclopentadienyl)bis(1,2:5,6-di-O-isopropylidene-α-D -glucofuranos-3-O-yl)titanium ( 1 ) is used for the transmetallation of Li-enolates obtained from propionyl derivatives. While such Ti-enolates of ketones and hydrazones appear to be unreactive, the (E)enolate 13 of 2,6-dimethylphenyl propionate ( 11 ) adds to the re-side of aldehydes, affording various syn-aldols 14 with high dia- and enantioselectivity (92–97% ds, 91–97% ee, cf. Scheme 2 and Table 1). Racemic syn-aldols (±)- 14 are obtained analogously from the achiral bis(2-propyloxy)-Ti-enolate 15 (Scheme 2 and Table 2). In contrast to the unstable Li-enolate 10 , the Ti-enolates 13 and 15 isomerize at ?30°, presumably to the thermodynamically more stable (Z)-enolates (Scheme 4), While the diastereoselectivity of the achiral enolate 15 is lost upon this equilibration, the chiral (Z)-enolate 27 quite unexpectedly affords anti-aldols 12 of high optical purity (94–98% ec) and, in most cases, with acceptable-to-good diastereoselectivity (82–90% ds). Notable exceptions are branched unsaturated and aromatic aldehydes which form a greater proportion of synepimers of moderate optical purity (Scheme 5 and Table 3). Consistent with these findings, re-facial-and ami -selective aldol-addition is also exhibited by the (Z)-configurated Ti-enolate 22 of N-propionyl-oxazolidi-none 19 (Scheme 3).     

GnRH binding RNA and DNA Spiegelmers: a novel approach toward GnRH antagonism

Mirror-image oligonucleotide ligands (Spiegelmers) that bind to the pharmacologically relevant target gonadotropin-releasing hormone I (GnRH) with high affinity and high specificity have been identified using the Spiegelmer technology. GnRH is a decapeptide that plays an important role in mammalian reproduction and sexual maturation and is associated with several benign and malignant diseases. First, aptamers that bind to D-GnRH with dissociation constants of 50-100 nM were isolated out of RNA and DNA libraries. The respective enantiomers of the DNA and RNA aptamers were synthesized, and their binding to L-GnRH was shown. These Spiegelmers bind to L-GnRH with similar affinity to that of the corresponding aptamers that bind to D-GnRH. We further demonstrated dose-dependent inhibition of GnRH-induced Ca(2+) release in Chinese hamster ovary cells that were stably transfected with the human GnRH receptor.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Mechanism of phosphorus-carbon bond cleavage by lithium in tertiary phosphines. An optimized synthesis of 1,2-Bis(phenylphosphino)ethane

Conditions influencing the extent of P-C(aryl) vs P-C(alkyl) bond cleavage in the reaction of Ph(2)P(CH(2))(2)PPh(2) with lithium in THF have been investigated. The results complement and elucidate earlier work; they indicate that the mechanism of P-C bond cleavage in tertiary phosphines of this type involves a thermodynamic equilibrium between P-C(aryl) and P-C(alkyl) cleaved radicals and anions, followed by reaction and stabilization of these as lithium salts. The addition of water to the reaction mixture causes a reestablishment of the cleavage equilibrium prior to the formation of the secondary phosphines. A mechanism involving competitive release of leaving groups as the thermodynamically most stable anion or radical has been proposed. The preparation of (R, R)-(+/-)/(R, S)-PhP(H)(CH(2))(2)P(H)Ph by this route has been optimized.     

Fe(III) coordination properties of a new saccharide-based exocyclic trihydroxamate analogue of ferrichrome

The coordination chemistry of a saccharide-based ferrichrome analogue, 1-O-methyl-2,3,4-tris-O-[4-(N-hydroxy-N-methylcarbamoyl)-n-butyrate]-alpha-d-glucopyranoside (H(3)L), is reported, along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous-solution speciation as determined by spectrophotometric and potentiometric titration techniques. The use of a saccharide platform to synthesize a hexadentate trihydroxamic acid chelator provides some advantages over other approaches to ferrichrome models, including significant water solubility and hydrogen-bonding capability of the backbone that can potentially provide favorable receptor recognition and biological activity. The pK(a) values for the hydroxamate moieties were found to be similar to those of other trihydroxamates. Proton-dependent Fe(III)-H(3)L and Fe(II)-H(3)L equilibrium constants were determined using a model involving the sequential protonation of the iron(III)- and iron(II)-ligand complexes. These results were used to calculate the formation constants, log beta(110) = 31.86 for Fe(III)L and 12.1 for Fe(II)L(-). The calculated pFe value of 27.1 indicates that H(3)L possesses an Fe(III) affinity comparable to or greater than those of ferrichrome and other ferrichrome analogues and is thermodynamically capable of removing Fe(III) from transferrin. E(1/2) for the Fe(III)L/Fe(II)L(-) couple was determined to be -436 mV from quasi-reversible cyclic voltammograms at pH = 9, and the pH-dependent E(1/2) profile was used to determine the Fe(II)L(-) protonation constants.