Solution-based assembly of conductive gold film on flexible polymer substrates

Conductive films of gold were assembled on flexible polymer substrates such as Kapton and polyethylene using a solution-based process. The polymer substrates were modified by using argon plasma and subsequent coupling of silanes with amino- or mercapto- terminal groups. These modified surfaces were examined by X-ray photoelectron spectroscopy and contact angle measurements. Colloidal gold was assembled onto the silane-modified surface from solution. The gold particles are attached to the surface by covalent interactions with the thiol or amine group. Formation of a conductive film is achieved by increasing the coverage of gold by using a "seeding" method to increase the size of the attached gold particles. Field emission scanning electron microscopy was used to follow the growth of the film. The surface resistance of the films, measured using a four-point probe, was about 1 Omega/sq.     

Kinetics and mechanism of formation of square-planar copper(II) and nickel(II) complexes of ethylenebisbiguanide in aqueous acetate buffer media

Summary The kinetics of formation of square-planar Cu^II and Ni^II complexes of the quadridentate ligand, ethylenebisbiguanide, have been studied spectrophotometrically in aqueous HOAc–NaOAc buffer, at ionic strength 0.2 mol dm^–3, in the 25–35°C temperature range. The observed rate constants for the formation reactions are independent of pH (and of OAc^– concentration) in the pH range used (3.6–4.8 for Cu^II and 5.0–5.8 for Ni^II) where the product complexes form stoichiometrically, but show first-order dependence on the ligand concentration;i.e. k_obs=k_f[L]_total. At 25°C k_f values (dm³ mol^–1s^–1) are 35.2±0.4 for Cu^II and (8.4±0.1)×10^–3 for Ni^II. The mechanism of the reactions is discussed.     

A cosmological study in massive gravity theory

A detailed study of the various cosmological aspects in massive gravity theory has been presented in the present work. For the homogeneous and isotropic FLRW model, the deceleration parameter has been evaluated, and, it has been examined whether there is any transition from deceleration to acceleration in recent past, or not. With the proper choice of the free parameters, it has been shown that the massive gravity theory is equivalent to Einstein gravity with a modified Newtonian gravitational constant together with a negative cosmological constant. Also, in this context, it has been examined whether the emergent scenario is possible, or not, in massive gravity theory. Finally, we have done a cosmographic analysis in massive gravity theory.     

Atomic Layer Deposition of Aluminum-Free Silica onto Patterned Carbon Nanotube Forests in the Preparation of Microfabricated Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We describe the direct, conformal, atomic layer deposition (ALD) of silica onto carbon nanotubes (CNTs) in the microfabrication of...     

Studies on the thermal properties of silicone polymer based thermal protection systems for space applications

Journal of Thermal Analysis and Calorimetry - Thermal decomposition, thermal conductivity, specific heat and flammability of polydimethyl siloxane (PDMS) resin and three PDMS-based systems with...     

Analysis of refractometric fiber optic state-of-charge (SOC) monitoring sensor for lead acid battery

In situ monitoring of the state of charge (SOC) of lead acid battery is important to understand the residual electrical energy. Usage of battery reduces the charge content of the active electrolyte which in turn changes its refractive index. This paper reports refractometric fiber optic sensor developed for on-line monitoring of SOC. The SOC is monitored during discharging phases of the battery using the developed fiber optic sensor probe along with terminal voltage, temperature and depth of discharge using a LABVIEW based data acquisition system. The paper gives the working principle, design and construction details, results and calibration of the fiber optic sensor (FOS) probe. The in situ monitoring capability of the developed FOS is demonstrated in comparison with the contemporary off-line methods of specific gravity and terminal voltage measurements.     

Separation of Variables for a Lattice Integrable System and the Inverse Problem

We investigate the relation between the local variables of a discrete integrable lattice system and the corresponding separation variables, derived from the associated spectral curve. In particular, we have shown how the inverse transformation from the separation variables to the discrete lattice variables may be factorized as a sequence of canonical transformations.     

Interfacial Engineering of CdO–CdSe 3D Microarchitectures with in situ Photopolymerized PEDOT for an Enhanced Photovoltaic Performance

In the present work, porous 3D CdO‐microstructured electrode obtained by pyrolysis of 3D CdCO₃ microstructures is self‐sensitized with CdSe using an ion exchange reaction. After sensitization, an interfacial treatment of the CdO–CdSe interface is performed by depositing a thin film of PEDOT using a photoinduce polymerization route. The microstructured electrode before and after interfacial treatment is characterized using field‐emission scanning microscope, energy dispersive X‐ray analyzer, contact angle measurement, UV–Visible absorption spectrophotometer and X‐ray photoelectron spectrometer. After constructing a liquid junction solar cell with a Pt counter electrode, the photovoltaic performance and interfacial charge transfer kinetics across the CdO–CdSe interface before and after PEDOT treatment are investigated. The results exhibit an improved interfacial charge‐transfer resistance after the PEDOT treatment, which leads to enhance the short‐circuit current by 15.81% and the power conversion efficiency by 19.82%.     

Hydroxylation of the silica in microfabricated thin layer chromatography plates as probed by time‐of‐flight secondary ion mass spectrometry and diffuse reflectance infrared Fourier transform spectroscopy

Microfabricated silica thin layer chromatography (TLC) plates have previously been prepared on patterned carbon nanotube forests. The high temperatures used in their fabrication reduce the number of hydroxyl groups on their surfaces. Fortunately, silica can be rehydroxylated. In diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), a silanol peak below 3740 cm^?1 indicates a well‐hydroxylated silica surface that is fit for chromatography. Hydroxylations of our materials with HF are so effective that it is not possible to discern the position of this peak. In contrast, this signal is discernable when the plates are treated with NH₄OH. To find a more convenient method for studying the surfaces of TLC plates, time‐of‐flight secondary ion mass spectroscopy (ToF‐SIMS) was considered. ToF‐SIMS is advantageous because multiple microfabricated TLC plates must be scraped to obtain enough silica for one DRIFT analysis, while static SIMS can be performed on very small regions (500 × 500 µm² or less) of individual plates. Ratios of the SiOH⁺ and Si⁺ ToF‐SIMS signals for microfabricated TLC plates correlated well with ~3740 cm^?1 silanol peaks from DRIFT. Thus, SIMS allows direct analysis of all of our treated and untreated plates, including those hydroxylated with HF. The best hydroxylation condition for HF, which was better than any studied for NH₄OH, was around 150 ppm at room temperature. The best hydroxylation condition for NH₄OH was 50 °C for 72 h. ToF‐SIMS versus DRIFT results of commercial TLC plates were also obtained and evaluated. Copyright © 2014 John Wiley & Sons, Ltd.