Partially nanowire-structured TiO2 electrode for dye-sensitized solar cells

Partially nanowire-structured TiO₂ was prepared by a hydrothermal processing followed by calcination in air. The hydrogen titanate powder as-synthesized was calcined at 300 °C for 4 h to obtain the partially nanowire-structured TiO₂. A dye-sensitized solar cell (DSC) with a film thickness of 5.6 μm, fabricated using the partially nanowire-structured TiO₂ showed better performance than using a fully nanowire-structured TiO₂ or a conventional equi-axed TiO₂ nanopowder. The short-circuit current density (J_SC), the open-circuit voltage (V_OC), the fill factor (FF) and the overall efficiency (η) are 11.9 mA/cm², 0.754 V, 0.673 and 6.01 %, respectively. The effects of one-dimensional nanostructure and electron expressway concept are discussed.     

Addition of TiO2 nanowires in different polymorphs for dye-sensitized solar cells

TiO₂ (B) and TiO₂ anatase nanowires were prepared at 150 °C for 120 h by a hydrothermal method followed by calcination in air at 400 °C for 2 h and at 700 °C for 2 h for TiO₂ (B) and TiO₂ anatase, respectively. Although dye-sensitized solar cells (DSC) with fully nanowire electrodes showed a rather low light-to-electricity conversion efficiency of 1.33 % for TiO₂ (B) and 2.42% for TiO₂ anatase, 10 wt % nanowire-dispersed electrodes in a P-25 TiO₂-nanoparticle matrix demonstrated improved efficiency of 6.17 % for TiO₂ (B) and 6.53% for TiO₂ anatase, these exceeding that of pure P-25 electrodes in this work (η=5.59%). The dominant mechanisms of the improvement at 10 wt% for the two different polymorphs are thought to be different, i.e., a light-scattering and film-thickness increment for the TiO₂ (B) system, whereas there is an improved conduction path through the matrix for the TiO₂ anatase system.      

Self-assembled monolayers derived from alkoxyphenylethanethiols having one, two, and three pendant chains

This article describes the design, synthesis, and study of alkoxyphenylethanethiol-based adsorbates with one (R1ArMT), two (R2ArMT), and three (R3ArMT) pendant octadecyloxy chains substituted at the 4-, 3,5-, and 3,4,5-positions, respectively, of the phenylethanethiol group. These adsorbates are being developed for use in the preparation of compositionally versatile "mixed" self-assembled monolayer (SAM) coatings. The resultant SAMs were characterized by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). The studies revealed that R1ArMT generates a well-ordered monolayer film, while R2ArMT and R3ArMT generate monolayer films with diminished conformational order in which the degree of crystallinity decreases as follows: C18 ～ R1ArMT > R3ArMT > R2ArMT. In addition, comparison of the molecular and chain packing densities of SAMs derived from these new adsorbates reveals that the R2ArMT and R3ArMT adsorbates give rise to SAMs with reduced chain tilt and smaller surface area per chain when compared to the SAMs derived from C18 and R1ArMT.     

A simple route utilizing surfactant-assisted templating sol-gel process for synthesis of mesoporous Dy2O3 nanocrystal

A simple route of combined sol-gel process with surfactant-assisted templating technique was successfully employed for the first time to synthesize nanocrystalline mesoporous Dy(2)O(3) with narrow monomodal pore size distribution under mild conditions. The nanocrystalline Dy(2)O(3) with monomodal mesoporous characteristic was ultimately achieved by controlling the hydrolysis and condensation steps of dysprosium n-butoxide modified with acetylacetone in the presence of laurylamine hydrochloride surfactant aqueous solution. The synthesized material was methodically characterized by thermogravimetry and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), N(2) adsorption-desorption, Brunauer-Emmett-Teller (BET) surface area analysis, and Barrett-Joyner-Halenda (BJH) pore size distribution analysis. The particle size of the synthesized Dy(2)O(3) in nanosized range obtained from the SEM and HRTEM micrographs was in good accordance with the crystallite size estimated from the XRD result. The N(2) adsorption-desorption result exhibited hysteresis pattern with single loop, indicating the existence of monomodal mesopore. The extremely narrow pore size distribution with mean pore diameter in the mesopore region of the synthesized Dy(2)O(3) was also confirmed by the BJH result.     

Comparison of electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb, Ge, Zr-added TiO2 composite electrodes

Electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were examined to disclose the effects of partial substitution of Ti atom by the other metals in the composite electrodes. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were prepared by sol-gel process using laurylamine hydrochloride as a template for the formation of micellar precursors yielding well-defined mesoporous nanocrystalline structures, as in the cases of the formation of silica and titania tubules and nanoparticles by the templating mechanism. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were characterized by transmission electron microscopy, BET surface area analysis, X-ray diffraction analysis, Raman spectroscopy, and impedance measurements. The TiO2 anatase nanocrystalline structure is retained after doping a small amount (5 mol %) of Nb, Ge, or Zr into the TiO2 structure, suggesting the homogeneous distribution of the doped metals with replacing Ti atom by the doped metal. The power conversion efficiency of the porphyrin-sensitized solar cells increases in the order Zr-added TiO2 (0.8%) < Nb-added TiO2 (1.2%) < TiO2 (2.0%) < Ge-added TiO2 cells (2.4%) under the same conditions. The improvement of cell performance of the Ge-added TiO2 cell results from the negative shift of the conduction band of the Ge-added TiO2 electrode. The Ge-added TiO2 cell exhibited a maximum power conversion efficiency of 3.5% when the porphyrin was adsorbed onto the surface of the Ge-added TiO2 electrode with a thickness of 4 microm in MeOH for 1 h.