Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.     

The separation of hypericin's enantiomers and their photophysics in chiral environments

We report the first separation of the enantiomers of hypericin. Their steady-state optical spectra and ultrafast primary photoprocesses are investigated in chiral environments. Within experimental error, there is no difference between the two enantiomers in any of the systems considered. This is consistent with the emerging picture that the rich and extended absorption spectrum of hypericin is not a result of ground-state heterogeneity. It is also consistent with the observation that the spectra and photophysics of hypericin are generally insensitive to environments in which it does not aggregate.     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

Double percolation effect on the electrical conductivity of conductive particles filled polymer blends

Electrical conductivity of carbon black (CB) filled polymer blends which are incompatible with each other was studied as a function of the polymer's blend ratio. Transmission electron microscope (TEM) analysis shows that CB distributes unevenly in each component of a polymer blend. TEM photographs of phase structure of solvent extracted HDPE/PMMA blend and solvent extraction experiments of PMMA/PP blend detect the blend ratio at which the structural continuity of filler rich phase is formed. The electrical conductivity of polymer blends is found to be determined by two factors. One is the concentration of CB in the filler rich phase and the other is the structural continuity of this phase. This double percolation affects the conductivity of conductive particle filled polymer blends.     

Cationic vesicles as chiral selector for enantioseparations of nonsteroidal antiinflammatory drugs by micellar electrokinetic chromatography

A vesicle-forming chiral cationic surfactant (1R,2S)-(-)-N-dodecyl-N-methyl-ephedrinium bromide was evaluated as a pseudo-stationary phase in micellar electrokinetic chromatography (MEKC) for enantioseparation of eight non-steroidal anti-inflammatory drugs e.g., carprofen, flurbiprofen, fenoprofen, ibuprofen, indoprofen, ketoprofen, naproxen and suprofen by capillary electrophoresis. The effects of varying experimental conditions such as pH and concentration of surfactant in the running buffer on the enantiomer separation of the drugs are reported. A mixture of five of the above drugs was separated and each enantiomeric pair was also separated simultaneously in a single run by use of the surfactant. The strong electrostatic interactions between the analytes and the vesicles seemed to have a major role in the enantiomeric separation of the profens.     

The reactions of beta- and alpha-pyranose peracetates with PCl5, and utilization of the products to construct sarsasapogenin glycosides.

The reactions of beta- and alpha-pyranose peracetates with PCl5 gave products regioselectively chlorinated. The reactions of 1,2,3,4,6-penta-O-acetyl-beta-D-glucopyranose (5) and -beta-D-galactopyranose (6) with PCl5 in CCl4 and that of methyl 2,3,4-tri-O-acetyl-beta-D-glucuronatopyranose (7) with PCl5 in toluene gave 2-O-trichloroacetyl-beta-D-pyranosyl chlorides 4, 12 and 14, respectively, as major products, and alpha-D-pyranosyl chlorides 11, 13 and 15, respectively, as minor products. On the other hand, the reactions of compounds 8 and 9 which were alpha-anomers of 5 and 6, respectively, with PCl5 gave as major products transformed acetyl groups at C-6 to -C(Cl) = CCl2 or -C(Cl)2-CCl3 group (16 and 17 from 8 and 18 from 9). The same reaction of 10, which was alpha-anomer of 7, gave alpha-chloride 15 as a major product. The glycosidation of sugar derivative 4 with sarsasapogenin 23 gave beta-glycoside 24 (29.1%) and alpha-glycoside 25 (46.9%), and that of 12 with 23 gave beta-glycoside 26 (24.0%) and alpha-glycoside 27 (40.8%). The improvement of the yields of beta-glycosides 24 and 26 (66.9 and 62.1% for 24 and 26, respectively) in the glycosidations were accomplished by the employment of alpha-bromides 28 and 29 obtained from 4 and 6, respectively. The glycosidations of monoglycosides 30 and 31 obtained by the treatment 24 and 26, respectively, with ammonia-saturated ether with sugar acetate bromides 32 and 34 gave diglycoside derivatives 35 and 33, respectively.     

Synthesis of N-Alkoxy Amidine Salts Via Addition of (N-Alkyl-N-Alkoxyammine)Dimethylaluminum Chlorides to Nitriles

Abstract: The addition of (N-alkyl-N-alkoxyammine)dimethylaluminum chlorides to nitriles provides a convenient route to little investigated N-alkoxy amidine hydrochlorides. A survey of the scope of this reaction is presented.     

Coumarinyl azoimidazolyl complexes of osmium(II) hydridocarbonyls: spectroscopic and structural characterization,oxidation catalysis,photovoltaic effect and density functional theory computation

Os(II) hydridocarbonyl complexes of coumarinyl azoimidazoles, [Osh(CO)(PPh₃)₂(CZ‐4R‐R′)]^0/+ ( 3 , 4 ) (CZ‐R‐H = 2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole or 1‐alkyl‐2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole), were characterized from spectroscopic data and the single‐crystal X‐ray data for one of the complexes, [Osh(CO)(PPh₃)₂(CZ‐4‐Ph)] ( 3c ) (CZ‐4‐Ph = 2‐(coumarinyl‐6‐azo)‐4‐phenylimidazolate), confirmed the structure. The complexes show higher emission (quantum yield ? = 0.0163–0.16) and longer lifetime (τ = 1.4–10.3 ns) than free ligands (? = 0.0012–0.0185 and τ = 0.685–1.306 ns). Cyclic voltammetry shows quasi‐reversible metal oxidation at 0.67–0.94 V for [Os(III)/Os(II)] and 1.21–1.36 V for [Os(IV)/Os(III)] and subsequent azo reductions (?0.68 to ?0.95 V for [? N?N? ]/[? N N? ]^? and irreversible < ?1.2 V for [? N N? ]^?/[? N? N? ]^2?) of the chelated coumarinyl azoimidazole. The complexes are photostable and show better photovoltaic power conversion efficiency than free ligands. Also, the complexes were used as catalysts for the oxidation of primary/secondary alcohols to aldehydes/ketones using oxidizing agents like N‐methylmorpholine N‐oxide, t‐BuOOH and H₂O₂. Density functional theory computation was carried out from the optimized structures and the data obtained were used to interpret the electronic and photovoltaic properties. Copyright © 2016 John Wiley & Sons, Ltd.     

MWCNTs-ZrO2 as a reusable heterogeneous catalyst for the synthesis of N-heterocyclic scaffolds under green reaction medium

A simple, efficient, and facile heterogeneous multi-walled carbon nanotubes-zirconia nanocomposite (MWCNTs-ZrO₂) has been synthesized using natural feedstock coconut juice (água-de-coco do Ceará). The synthesized catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy analysis. The heterogeneous nanocomposite has been used for one-pot synthesis of various N-heterocyclic compounds like pyrazoles, 1,2-disubstituted benzimidazoles, 2-arylbenzazoles, and 2,3-dihydroquinazolin-4(1H)-ones under green reaction medium at room temperature. This novel method has several advantages, such as short reaction time, simple work-up, excellent yield, and green reaction conditions. The catalyst was recycled up to four times without significant loss in catalytic activity.