Preparation and properties of sol-gel coating films

The present state of our knowledge on sol-gel coating films has been reviewed. A qualitative discussion is made on the limit of the film thickness which can be achieved in the sol-gel method and the factors affecting the film thickness. Considering that properties of the film are intimately related to the microstructure, types of microstructures accomplished by the sol-gel coating are introduced with examples.     

Sugar-anionic clay composite materials: intercalation of pentoses in layered double hydroxide

The intercalation of non-ionized guest pentoses (ribose and 2-deoxyribose) into the Mg-Al and Zn-Al layered double hydroxides (LDHs) was carried out at 298 K by the calcination-rehydration reaction using the Mg-Al and Zn-Al oxide precursors calcined at 773 K. The resulting solid products reconstructed the LDH structure with incorporating pentoses, and the maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 20 times that by the Zn-Al oxide precursor. The ribose/Mg-Al LDH was observed to have the expanded LDH structure with a broad (003) spacing of 0.85 nm. As the thickness of the LDH hydroxide basal layer is 0.48 nm, the interlayer distance of the ribose/Mg-Al LDH is 0.37 nm. This value corresponds to molecular size of ribose in thickness (0.36 nm), supporting that ribose is horizontally oriented in the interlayer space of LDH. The maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 5 times that of 2-deoxyribose. Ribose is substituted only by the hydroxyl group at C-2 position for 2-deoxyribose. Therefore, the number of hydroxyl group of sugar is essentially important for the intercalation of sugar molecule into the LDH, suggesting that the intercalation behavior of sugar for the LDH was greatly influenced by hydrogen bond between hydroxyl group of the intercalated pentose and the LDH hydroxide basal layers.     

Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

A catalytic chemical vapor deposition synthesis of double-walled carbon nanotubes over metal catalysts supported on a mesoporous material

Double-walled carbon nanotubes (DWNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) over supported metal catalysts decomposed from Fe(CH₃COO)₂ and Co(CH₃COO)₂ on mesoporous silica. Bundles of tubes with relatively high percentage of DWNTs, in areas where tubular layered structures could be clearly resolved, have been observed by transmission electron microscopy (TEM). In other areas, crystal-like alignment of very uniform DWNTs was observed for the first time, suggesting that mesoporous silica might play a templating role in guiding the initial nanotube growth. In addition, compatible with nano-electronics research, bridging of catalytic islands by DWNTs has also been demonstrated.     

A New Family of Indoaniline-Derived Calix[4]arenes: Synthesis and Optical Recognition Properties as a Chromogenic Receptor(1)

A new family of indoaniline-derived calix[4]arenes has been synthesized for the purpose of developing a new chromogenic receptor. A condensing reaction of calix[4]arene (1) with 4-(diethylamino)-2-methylaniline hydrochloride (2) in the presence of an oxidizing agent under alkaline conditions affords mono- (3), 1,2-bis- (4), 1,3-bis- (5), and tetrakisindoaniline-derived (6) calix[4]arenes after careful column chromatography. Compound 3 is crystallized from a CHCl(3)-MeOH solution, and the crystal structure was determined by X-ray analysis. The crystal is monoclinic, space group P2(1)/n, Z = 4, a = 19.507(6) ?, b = 18.591(6) ?, c = 8.524(2) ?, beta = 94.69(2) degrees. The final R value for 2406 reflections of F(o) > 3sigma(F(o)) is 0.085. A unique intramolecular hydrogen-bonding network involving the carbonyl oxygen of indoaniline for 3 implied that the quinone carbonyl group as an acceptor of the chromophore can easily be subjected to an electrostatic interaction in the lower rim. Indeed, 1,3-bis(indoaniline)-derived 2,4-bis((ethoxycarbonyl)methoxy)calix[4]arene 7, prepared by the reaction of 5 with ethyl bromoacetate in the presence of NaH, is capable of undergoing an efficient ion-dipole interaction between the binding cation and the two quinone carbonyl groups of the chromophores, so that a selective Ca(2+)-induced pronounced color change (wavelength change > 100 nm) occurs with an association constant on the order of 10(6) in 99% EtOH, making 7 of potential use as an optical sensor for Ca(2+) detection. The IR and NMR studies have indicated that Ca(2+) is encapsulated in the cavity made by the distally located OCH(2)CO(2) groups on the lower rim of the cone-shaped calix[4]arene segment. Interestingly, however, the shape of the cavity in which Ca(2+) has been encapsulated does not have a C(2) axis of symmetry, as inferred from the (1)H-(1)H COSY experiment. On the other hand, 1,2-bis(indoaniline)-derived analogue 8 shows no response with metal ions, which can be interpreted to mean the absence of a cavity for encapsulation on the lower rim.     

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

Generating high surface area mesoporous transition metal boride is challenging but interesting because incorporation of boron atoms can generate lattice distortion to form amorphous metal boride which has unique properties in catalysis.     

Preparation and characterization of novel branched beta-cyclodextrins having beta-D-galactose residues on the non-reducing terminal of the side chains and their specific interactions with peanut (Arachis hypogaea) agglutinin

Six novel branched beta-cyclodextrins (betaCDs) having beta-D-galactose residues on the non-reducing terminal of the sugar side chains, namely 6(1),6(4)-di-O-(beta-D-galactosyl)-betaCD (10), 6-O-(beta-D-galactosyl)-betaCD (11), 6(1),6(4)-di-O-(beta-lactosyl)-betaCD (14), 6-O-(beta-lactosyl)-betaCD (15), 6(1),6(4)-di-O-(4'-O-beta-D-galactosyl-beta-lactosyl)-betaCD (18), and 6-O-(4'-O-beta-D-galactosyl-beta-lactosyl)-betaCD (19), were chemically synthesized using the trichloroacetimidate method. The reaction products were separated by HPLC on an amino column into dibranched and monobranched betaCDs. Their structures were confirmed by mass spectrometry (MS) and two-dimensional (2D) NMR spectroscopic analysis. To study the length of the sugar side chains attached to the CD ring, which leads to differences in the functions of the branched CDs, interactions of these compounds with peanut (Arachis hypogaea) agglutinin (PNA) were investigated using an optical biosensor and an inhibition assay based on hemagglutination. The results showed that all branched betaCDs interacted with PNA, and the binding affinity was 18>14>10 and 19>15>11 when the derivatives were compared on the basis of side chain length.