IMEP in support of the comparability of measurement results across the Romanian chemical metrology infrastructure

On the basis of quantitative chemical measurements many important decisions are made in support of legislation or in industrial processes or social aspects. For this reason it is important to improve the quality of chemical measurement results and thus make them comparable and acceptable everywhere. The measurement quality is important to enable an equivalent implementation of the European Union regulations and directives across an enlarged EU. In this context, the European Commission–Joint Research Centre–Institute for Reference Materials and Measurement (EC-JRC-IRMM) set up a programme to improve the scientific basis for metrology in chemistry (MiC) in EU candidate countries in the framework of EU enlargement. Several activities were initiated, such as training, fellowships, sponsoring of seminars, conferences and participation in interlaboratory comparisons. To disseminate measurement traceability, IRMM provides through its International Measurement Evaluation Programme (IMEP) an interlaboratory tool to enable the benchmarking of laboratory performance. IMEP emphasizes the metrological aspects of measurement results, such as traceability and measurement uncertainty. In this way it has become a publicly available European tool for MiC. The Romanian Bureau of Legal Metrology – National Institute of Metrology (BRML-INM) actively supports the participation of Romanian authorized and field laboratories in IMEP interlaboratory comparisons. This paper describes the interest of Romanian laboratories participating in this programme, the analytical and metrological problems that became relevant during these exercises and some actions for improvement. The results from Romanian laboratories participating in IMEP-12 (water), IMEP-16 (wine), IMEP-17 (human serum) and IMEP-20 (tuna fish) are presented. To conclude, the educational and training activities at national level organized jointly by the Romanian National Institute of Metrology (INM) and IRMM are also mentioned.     

Practical aspects of the uncertainty and traceability of spectrochemical measurement results by electrothermal atomic absorption spectrometry

The determination of trace elements concentration in water by electrothermal atomic absorption spectrometry (ETAAS) is a common and well established technique in many chemical testing laboratories. However, the evaluation of measurement uncertainty results is not systematically implemented. The paper presents an easy step-by-step example leading to the evaluation of the combined standard uncertainty of copper determination in water using ETAAS. The major contributors to the overall measurement uncertainty are identified due to amount of copper in water sample that mainly depends on the absorbance measurements, due to certified reference material and due to auto-sampler volume measurements. The practical aspects how the traceability of copper concentration in water can be established and demonstrated are also pointed out.     

Synthesis and Complexation Studies of Various Precursors Based on Calix[4]arene-crown-5 and -6 for the Immunoanalysis of Potassium and Caesium Ions

In an attempt to generate antibodies for the development of an immunoanalysis method for potassium and caesium ions, new 1,3-alternate calix[4]arenes-crown-5 and -6 bearing either carboxylic or hydroxyl functions were synthesized in good yields. Their complexation properties towards potassium and caesium ions were investigated using ¹H NMR spectroscopy and the usual properties proved to be preserved in the presence of the anchoring arms.     

Synergistic effect between TiO2 sol–gel and Degussa P25 in dye photodegradation

The TiO₂ powders were synthesized by versatile and low cost sol–gel process using HNO₃ and titanium tetra-isopropoxide (volumetric ratio of 4:1) following by the hydrolysis reaction. The powders show the two polymorphs of TiO₂: 96 % anatase and 4 % brookite, due to acidic condition (pH = 3). Thin films of titanium oxide were obtained by dip-coating, using the sol–gel of titanium oxide mixed with commercial Degussa P25 into a weight ratio 1:1 or 1:1.5, to enhance the synergistic effect of anatase/rutile ratio aiming at increasing the efficiency of the TiO₂ photocatalyst in dyes degradation. The thin film surface (charge and morphology) was controlled by polymer (poly-ethylene glycol) and surfactant (Sodium dodecyl sulphate, Triton X100) addition. The titanium oxide was characterized by particle size analyzer, contact angle measurements, X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The photocatalytic properties of powders and coatings were evaluated based on the degradation efficiency of two reference dyes (methyl orange and methylene blue). The results outline that poly(ethylene glycol) and films morphologies are the most influential factors that affecting the photocatalytic activity.     

Processing Parameters Matching Effects upon Rhizobium tropici Biopolymers’ Rheological Properties

The combined effects of the processing parameters upon rheological properties of biopolymers produced by Rhizobium tropici were studied as a function of the Ca(+2) ions' concentration variation, yeast extract concentration added to the medium, aeration, and agitation, maintaining the mannitol concentration in 10 g/L. The experiments were carried out using a fermenter with 20-L capacity as a reactor. All processing parameters were monitored online. The temperature [(30 +/- 1) degrees C] and pH values (7.0) were kept constant throughout the experimental time. As a statistical tool, a complete 2(3) factorial design with central point and response surface was used to investigate the interactions between relevant variables of the fermentation process: calcium carbonate concentration, yeast extract concentration, aeration, and agitation. The processing parameter setup for reaching the maximum response for rheological propriety production was obtained when applying mannitol concentration of 10.0 g/L, calcium carbonate concentration 1.0 g/L, yeast extract concentration 1.0 g/L, aeration 1.30 vvm, and agitation 800 rpm. The viscosimetric investigation of polysaccharide solutions exposed their shear-thinning behavior and polyelectrolytic feature.     

TrainMiC®: a programme for life-long learning in metrology in chemistry

This article gives an overview of the programme TrainMiC^®, a European programme for Life-Long Learning in metrology in chemistry. It explains its raison d’être and puts it into perspective to other European and EU member states initiatives. The TrainMiC^® system (http://www.trainmic.org) is described in detail. It is explained how it has developed into a truly unique system which is operational across many parts of Europe (19 countries) via national teams. These teams use shareware pedagogic tools. The learning content has been harmonised at the European level by a joint effort of many experts across Europe working via an Editorial Board. The material has been translated in ten different languages. Possible future evolution of this Life Long Learning programme is discussed.     

The influence of precursor’s composition and concentration on cadmium doped TiO<Subscript>2</Subscript> film

The purpose of this article is to emphasize that new nanomaterials offer a number of attractive alternatives for solar energy use in wastewater photocatalysis. The wastewater from the textile industry contains dyes and heavy metals. Thin films of cadmium doped TiO₂ (Cd-TiO₂) were coated by a doctor blade using TiO₂ Degussa P25 and cadmium precursor (cadmium nitrate). The photocatalytic efficiency of cadmium doped TiO₂ is strongly influenced by crystal structure, particle size, particle morphology, porosity and doping. The pore size distribution and the roughness analysis have been studied by the atomic force microscopy (AFM) of the thin films. The photocatalytic activity of the samples was tested in Methyl orange and Methylene blue photodegradation. Cadmium doped TiO₂ catalyst does not significantly decrease the efficiency of photodegradation processes, and, in some situations, improves dye photodegradation.     

Effect of process parameters on production of a biopolymer by Rhizobium sp.

The production of biopolymers by a Rhizobium strain was studied under batch and bioreactor conditions. The best viscosity levels were obtained under low mannitol concentrations as well as low agitation and aeration conditions. Infrared spectra indicated the presence of chemical groups characteristic of microbially produced biopolymers, including C=O and O-acetyl groups. Thermogravimetric analysis showed the characteristic degradation profiles of the exopolysaccharide produced (T _onset=290°C). The experimental design showed that a low substrate concentration (10.0 g/L), and low aeration (0.2 vvm) and agitation (200 rpm) levels should be used. The maximum yield of the process was a Yp/s (g/g) of 0.19±0.1, obtained under optimized conditions.     

Characterization of Al/Al2O3/NiOx solar absorber obtained by spray pyrolysis

The aim of this paper is to obtain high efficient and inexpensive spectral selective solar absorbers, for solar thermal flat plat collectors using a simple technique – spray pyrolysis deposition (SPD). To achieve maximum solar absorptance and minimum thermal emittance, the following parameters are optimized: the precursor solution concentration and composition, substrate temperature and annealing treatment. The structural and morphological properties of the films were investigated by X-ray diffraction, atomic force microscopy and contact angle measurements. The thermal emittance and solar absorptance of as-deposited films were correlated with the chemical composition, crystalline structure and morphology. The results prove that coatings with excellent spectral selective properties (normal solar absorptance of 0.92 and a normal thermal emittance of 0.03) can be obtained by SPD.     

Study of polyethylene nanolayers by evanescent light microscopy

Nanometer polyethylene (PE) thin films were prepared by Matrix Assisted Pulsed Laser Evaporation (MAPLE). Insulating PE thin films of different thicknesses, below 200 nm, were fabricated by varying the deposition conditions. We then used the Differential Evanescent Light Intensity (DELI) microscopy technique for thickness profiles investigation of the PE nanolayers together with AFM measurements for calibration. A phenomenological model for the interaction between the evanescent waves and the deposited material and simulations of the nanofilms evanescent light scattering using the Maxwell equation solver FullWAVE are presented.