Study of the gas-phase parameters affecting the silicon-oxide film deposition induced by an ArF laser

A study of the gas-phase parameters involved in ArF laser induced chemical vapour deposition of silicon-oxide thin films is presented. A complete set of experiments has been performed showing the influence of the concentration of the precursor gases, N₂O and SiH₄, and their influence on total and partial pressures on film growth and properties. In this paper we demonstrate the ability of this LCVD method to deposit silicon oxide films of different compositions and densities by appropriate control of gas composition and total pressure. Moreover, a material specific calibration plot comprising data obtained using different preparation techniques is presented, allowing determination of the stoichiometry of SiO _x films by using FTIR spectroscopy independently of the deposition method. For the range of processing conditions examined, the experimental results suggest that chemical processes governing deposition take place mainly in the gas phase.     

Development and validation of a near infrared method for the analytical control of a pharmaceutical preparation in three steps of the manufacturing process

A near infrared diffuse reflectance spectroscopy (NIRS) procedure for the quantitative control analysis of the active compound (otilonium bromide) in a pharmaceutical preparation in three steps of the production process (blended product, cores and coated tablets) and a methodology for its validation are proposed. The analytical procedure is composed by two consecutive steps. First, the sample is identified by comparing its spectrum with a second derivative spectral library. If the sample is positively identified, the active compound is quantified by using a previously established partial least squares (PLS) calibration model. The procedure was validated by studying repeatability, intermediate precision, accuracy and linearity. To this end, an adaptation of ICH (International Conference on Harmonisation) validation methodology to an NIR multivariate calibration procedure is proposed. The relative standard error of prediction (RSEP) was < or = 1% and the suitability of the procedure for control analysis was confirmed by the results obtained analysing new production samples produced over a three-month period.     

Esters of 5-carboxyl-5-methyl-1-pyrroline N-oxide: a family of spin traps for superoxide

Apparent rate constants, at acidic pH and neutral pH for the reaction of a family of ester-containing 5-carboxyl-5-methyl-1-pyrroline N-oxides with superoxide (O2*-) were estimated, using ferricytochrome c as a competitive inhibitor. It was of interest to note that the rate constants were similar among the different nitrones and not that significantly different from that found for 5-(diethoxyphosphoryl)-5-dimethyl-1-pyrroline N-oxide. At acidic pH, the rate constant for spin trapping O2*- was 3-fold greater than that at physiological pH. Subsequent experiments determined the half-life of aminoxyls, derived from the reaction of these nitrones with O2*-. The EPR spectra were modeled by using a global analysis method. The results clearly demonstrated that EPR spectra of all the aminoxyls were inconsistent with a model that included a single gamma-hydrogen splitting. A better interpretation modeled them as two diastereomers with identical nitrogen splittings and slightly different beta-hydrogen splittings. Detailed line width analyses slightly favored an equal line width-unequal population ratio for the two diastereomers.     

A pseudoreceptor docking study of 4,5-α-epoxymorphinans with a range of dielectric constants

Summary Thirteen 4,5-epoxymorphinan agonists with established analgesic action were docked into an Asp-Lys-His-Phe pseudoreceptor complex under a range of distance-dependent dielectric conditions. The number of compounds with potential energies of the docked complexes that agreed in rank order with corresponding analgesic potencies was determined for each condition. Two dielectric conditions, n-decane (1.991) and ethanol (24.3), enabled the greatest number of compounds to relate to their pseudoreceptors with each having 9 and 8 successes respectively. Both of these conditions demonstrated unique influences on the types of structures that were successfully docked. For example, the morphine stereoisomer -isomorphine, the geometric isomer B/C trans-morphine, and the 8-position-substituted -isomorphine were successes in the n-decane condition, whereas the ethanol condition produced the substituted codeine derivatives dihydroco-deinone and dihydroxycodeinone. These findings emphasize the importance of dielectric influence when developing force-field modeled quantitative structure-activity relationships for a closely related homologous series.     

Is there stereoselectivity in spin trapping superoxide by 5-tert-butoxycarbonyl-5-methyl-1-pyrroline N-oxide?

[reaction: see text] Ester-containing nitrones, including 5-tert-butoxycarbonyl-5-methyl-1-pyrroline N-oxide 5, have been reported to be robust spin traps for superoxide (O2*-). Using a chiral column, we have been able to isolate the two enantiomers of nitrone 5. With enantiomerically pure nitrone 5a and 5b we explored whether one of these isomers was solely responsible for the EPR spectrum of aminoxyl 6. Data obtained demonstrate that the spin trapping of O2*- by nitrone 5a and nitrone 5b affords the identical EPR spectra and lifetimes in homogeneous aqueous solution and exhibits the same ratio of cis and trans isomers. Quantum chemical modeling in vacuo also finds no difference, aside from the expected optical activity, arising from the difference in stereochemistry.     

Theoretical and experimental approach to the texturization process of bioreactive surfaces by high-power laser

The properties of orthopaedic/dental implants can be tuned through the laser surface modifications that take place during a laser ablation process. Processing assisted by a laser is adequate to produce macro- and micro-structures on metallic alloys and polymer surfaces in order to improve their biological response.     

Mechanism for room-temperature single-atom lateral manipulations on semiconductors using dynamic force microscopy

Vacancy-mediated lateral manipulations of intrinsic adatoms of the Si(111)-(7x7) surface at room temperature are reported. The topographic signal during the manipulation combined with force spectroscopy measurements reveals that these manipulations can be ascribed to the so-called pulling mode, and that the Si adatoms were manipulated in the attractive tip-surface interaction regime at the relatively low short-range force value associated to the manipulation set point. First-principles calculations reveal that the presence of the tip induces structural relaxations that weaken the adatom surface bonds and manifests in a considerable local reduction of the natural diffusion barriers to adjacent adsorption positions. Close to the short-range forces measured in the experiments, these barriers are lowered near the limit that enables a thermally activated hopping at room temperature.     

Tip-induced reduction of the resonant tunneling current on semiconductor surfaces

We report scanning tunneling microscope measurements showing a substantial decrease of the current, almost to zero, on the Si(111)-(7x7) reconstruction in the near-to-contact region under low bias conditions. First principles simulations for the tip-sample interaction and transport calculations show that this effect is driven by the substantial local modification of the atomic and electronic structure of the surface. The chemical reactivity of the adatom dangling bond states that dominate the electronic density of states close to the Fermi level and their spatial localization result in a strong modification of the electronic current.     

Superoxide dismutase versus ferricytochrome C: determining rate constants for the spin trapping of superoxide by cyclic nitrones

Given that spin trapping/electron paramagnetic resonance (EPR) spectroscopy has become the primary technique to identify important biologically generated free radicals, such as superoxide (O(2)(*-)), in vitro and in vivo models, evaluation of the efficiency of specific spin traps to identify this free radical is paramount. Recently, a family of ester-containing nitrones has been prepared, which appears to have distinct advantages for spin trapping O(2)(*-) compared to the well-studied spin traps 5,5-dimethyl-1-pyrroline N-oxide 1 and 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline N-oxide 2. An important determinant in the selection of a spin trap is the rate constant (k(app)) for its reaction with O(2)(*-), and several different methods have been employed in estimating this k(app). In this paper, the two most frequently used scavengers of O(2)(*-), ferricytochrome c and Cu/Zn-SOD, were evaluated as competitive inhibitors for spin trapping this free radical. Data presented herein demonstrate that SOD is the preferred compound when determining the k(app) for the reaction of O(2)(*-) with spin traps. Using this model, the k(app) for the reaction of nitrone 1, 5-tert-butoxycarbonyl-5-methyl-1-pyrroline N-oxide 3, and 5-methoxycarbonyl-5-methyl-1-pyrroline N-oxide 4 with O(2)(*)(-) was estimated to be 24.6 +/- 3.1, 73.0 +/- 12, and 89.4 +/- 1.0 M(-1) s(-1) at pH 7.0, respectively. Several other comparative studies between known spin traps were also undertaken.     

Ultrahigh Electron Emissive Carbon Nanotubes with Nano-sized RuO2 Particles Deposition

Multi-wall carbon nanotubes (MWNTs) have a great commercial potential as electron field emitters, but suffer from fundamental problems such as stability and brightness. By depositing the MWNTs with nano-sized ruthenium dioxide (RuO₂) particles, a new high performance emitter has been developed. When compared to MWNTs, the MWNTs impregnated with 1–2 nm sized RuO₂ have superior and more efficient electrical characteristics. MWNTs supported by a silicon substrate showed a reduction in the onset voltage from 5.4 to 4 V/μm after RuO₂ impregnation. The long-term stability of the impregnated MWNTs is also demonstrated with only a 20% increase in applied voltage required after 700 h operation at 40 mA/cm².