UV curable epoxy acrylate-clay nanocomposites

UV curable epoxy acrylates were reinforced with two different organically modified montmorillonites (MMTs) and an unmodified MMT. Conversion and rate of polymerization was monitored by real time infrared spectroscopy (RTIR) and photo-DSC. Microstructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical clarity. Optical clarity of the films containing clay was quite good as only a slight decrease was observed. Physical properties of the reinforced films were examined by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), hardness and tensile testing. Enhancements in glass transition temperature (T_g), thermal stability and mechanical properties were observed. The films reinforced with the unmodified MMT exhibit the most significant enhancements in properties.     

A one-pot synthesis of 1,4-dithiins and 1,4-benzodithiins from ketones using the recyclable reagent 1,1′-(ethane-1,2-diyl)dipyridinium bistribromide (EDPBT)

A novel access to 1,4-dithiins and 1,4-benzodithiins from the corresponding ketones in one-pot using the recyclable reagent, 1,1′-(ethane-1,2-diyl)dipyridinium bistribromide (EDPBT) is described. This method is mild, simple, environmentally benign and is applied successfully for the ring expansion of 1,3-dithiolane to 1,4-dithiins and the ring expansion associated with aromatisation of cyclic ketones with or without double bonds in the ring. The main feature of this method is that EDPBT acts as a promoter in the formation of 1,3-dithiolane and as a reagent in the ring expansion step. The spent reagent can be recovered, regenerated and reused.     

DAPPA grafted polymer: an efficient solid phase extractant for U(VI), Th(IV) and La(III) from acidic waste streams and environmental samples

A new class of polymeric resin has been synthesized by grafting Merrifield chloromethylated resin with (dimethyl amino-phosphono-methyl)-phosphonic acid (MCM-DAPPA), for the preconcentration of U(VI), Th(IV) and La(III) from both acidic wastes and environmental samples. The various chemical modification steps involved during grafting process are characterized by FT-IR spectroscopy, ³¹P and ¹³C-CPMAS (cross-polarized magic angle spin) NMR spectroscopy and CHNS/O elemental analysis. The water regain capacity data for the grafted polymer are obtained from thermo-gravimetric (TG) analysis. The influence of various physico-chemical parameters during the quantitative extraction of metal ions by the resin phase are studied and optimized by both static and dynamic methods. The significant feature of this grafted polymer is its ability to extract both actinides and lanthanides from high-level acidities as well as from near neutral conditions. The resin shows very high sorption capacity values of 2.02, 0.89 and 0.54 mmol g⁻¹ for U(VI), 1.98, 0.63 and 0.42 mmol g⁻¹ for Th(IV) and 1.22, 0.39 and 0.39 mmol g⁻¹ for La(III) under optimum pH, HNO₃ and HCl concentration, respectively. The grafted polymer shows faster phase exchange kinetics (<5 min is sufficient for 50% extraction) and greater preconcentration ability, with reusability exceeding 20 cycles. During desorption process, all the analyte ions are quantitatively eluted from the resin phase with >99.5% recovery using 1 M (NH₄)₂CO₃, as eluent. The developed grafted resin has been successfully applied in extracting Th(IV) from high matrix monazite sand, U(VI) from sea water and also U(VI) and Th(IV) from simulated nuclear spent fuel mixtures. The analytical data obtained from triplicate measurements are within 3.9% R.S.D. reflecting the reproducibility and reliability of the developed method.     

The Synthesis and Bioactivity of Dimethyl (2,3- Dihydrobenzo[b][1,4]Dioxin-6-Yl)(Aryl Amino)Methylphosphonates

Abstract

A new series of α-aminophosphonates have been synthesized by a one-pot three-component reaction of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde, various amines, and dimethyl phosphite by using nano-TiO₂ as a catalyst under solvent-free conditions at 50°C. The major advantages of the present method are high yields, short reaction times, recyclable catalyst, and solvent-free reaction conditions. Among these new structurally diversified set of α-aminophosphonates, dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(3-nitrophenylamino) methylphosphonate and dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(4-fluoro-3-nitro-phenyl-amino) methylphosphonate have shown higher antioxidant activity in diphenyl picryl hydrazyl (DPPH) scavenging, reducing power assay, and lipid peroxidation methods.     

Microwave sintering of nickel ferrite nanoparticles processed via sol–gel method

Magnetic nickel ferrite (NiFe₂O₄) was prepared by sol–gel process and calcined in the 2.45 GHz singlemode microwave furnace to synthesize nickel nanopowder. The sol–gel method was used for the processing of the NiFe₂O₄ powder because of its potential for making fine, pure and homogeneous powders. Sol–gel is a chemical method that has the possibility of synthesizing a reproducible material. Microwave energy is used for the calcining of this powder and the sintering of the NiFe₂O₄ samples. Its use for calcination has the advantage of reducing the total processing time and the soak temperature. In addition to the above combination of sol–gel and microwave processing yields to nanoscale particles and a more uniform distribution of their sizes. X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and vibrating sample magnetometer were carried out to investigate structural, elemental, morphological and magnetic aspects of NiFe₂O₄. The results showed that the mean size and the saturation magnetization of the NiFe₂O₄ nanoparticles are about 30 nm and 55.27 emu/g, respectively. This method could be used as an alternative to other chemical methods in order to obtain NiFe₂O₄ nanoparticles.     

Cu(OAc)2 entrapped on ethylene glycol-modified melamine–formaldehyde polymer as an efficient heterogeneous catalyst for Suzuki–Miyaura coupling reactions

Research on Chemical Intermediates - This work is described as an environmental friendly approach for Cu(OAc)2 entrapped on ethylene glycol-modified melamine–formaldehyde-based polymeric...     

Concurrent determination of olanzapine,risperidone and 9‐hydroxyrisperidone in human plasma by ultra performance liquid chromatography with diode array detection method: application to pharmacokinetic study

A simple and sensitive ultra‐performance liquid chromatography (UPLC) method has been developed and validated for simultaneous estimation of olanzapine (OLZ), risperidone (RIS) and 9‐hydroxyrisperidone (9‐OHRIS) in human plasma in vitro. The sample preparation was performed by simple liquid–liquid extraction technique. The analytes were chromatographed on a Waters Acquity H class UPLC system using isocratic mobile phase conditions at a flow rate of 0.3 mL/min and Acquity UPLC BEH shield RP₁₈ column maintained at 40°C. Quantification was performed on a photodiode array detector set at 277 nm and clozapine was used as internal standard (IS). OLZ, RIS, 9‐OHRIS and IS retention times were found to be 0.9, 1.4, .1.8 and 3.1 min, respectively, and the total run time was 4 min. The method was validated for selectivity, specificity, recovery, linearity, accuracy, precision and sample stability. The calibration curve was linear over the concentration range 1–100 ng/mL for OLZ, RIS and 9‐OHRIS. Intra‐ and inter‐day precisions for OLZ, RIS and 9‐OHRIS were found to be good with the coefficient of variation <6.96%, and the accuracy ranging from 97.55 to 105.41%, in human plasma. The validated UPLC method was successfully applied to the pharmacokinetic study of RIS and 9‐OHRIS in human plasma. Copyright © 2015 John Wiley & Sons, Ltd.