PRESSURE-VELOCITY EQUILIBRIUM HYDRODYNAMIC MODELS

This article describes mathematical models for phase separated mixtures of materials that are in pressure and velocity equilibrium but not necessarily temperature equilibrium. General conditions for constitutive models for such mixtures that exhibit a single mixture sound speed are discussed and specific examples are described.     

Using surface‐enhanced Raman scattering (SERS) and fluorescence spectroscopy for screening yeast extracts,a complex component of cell culture media

Yeastolate or yeast extract, which are hydrolysates produced by autolysis of yeast, are often employed as a raw material in the media used for industrial mammalian cell culture. The source and quality of yeastolate can significantly affect cell growth and production; however, analysis of these complex biologically derived materials is not straightforward. The best current method, liquid chromatography–mass spectrometry (LC‐MS), is time‐consuming and requires extensive expertise. This study describes the use of surface‐enhanced Raman scattering (SERS) and fluorescence excitation–emission matrix (EEM) spectroscopy coupled with robust principal component analysis (ROBPCA) for the rapid and facile characterization and discrimination of yeast extracts in aqueous solution. SERS using silver colloids generates time‐dependent signals, where adenine is the strongest contributor, and the spectra are stable and reproducible (< ~3%) at 180 min after mixing. Combining this spectral behavior with chemometric methods enables SERS to be used in discriminating between different yeastolate sources, for assessing lot‐to‐lot variability, and, potentially, to monitor storage‐induced compositional changes. Fluorescence EEM combined with multiway ROBPCA also provides a rapid and inexpensive method for the discrimination of yeastolate, yielding results in terms of sample discrimination very similar to that obtained with SERS. However, the EEM data does not provide the same level of chemical information that is provided by the SERS. Thus, the combination of these two methodologies has the potential to be extremely useful in biopharmaceutical manufacturing, as well as for the rapid characterization and screening of biogenic hydrolysates from animal or plant sources. Copyright © 2011 John Wiley & Sons, Ltd.     

Rapid, quantitative analysis of ppm/ppb nicotine using surface-enhanced Raman scattering from polymer-encapsulated Ag nanoparticles (gel-colls)

Rapid, quantitative SERS analysis of nicotine at ppm/ppb levels has been carried out using stable and inexpensive polymer-encapsulated Ag nanoparticles (gel-colls). The strongest nicotine band (1030 cm(-1)) was measured against d(5)-pyridine internal standard (974 cm(-1)) which was introduced during preparation of the stock gel-colls. Calibration plots of I(nic)/I(pyr) against the concentration of nicotine were non-linear but plotting I(nic)/I(pyr) against [nicotine](x)(x = 0.6-0.75, depending on the exact experimental conditions) gave linear calibrations over the range (0.1-10 ppm) with R(2) typically ca. 0.998. The RMS prediction error was found to be 0.10 ppm when the gel-colls were used for quantitative determination of unknown nicotine samples in 1-5 ppm level. The main advantages of the method are that the gel-colls constitute a highly stable and reproducible SERS medium that allows high throughput (50 sample h(-1)) measurements.     

A stainless steel multi‐well plate (SS‐MWP) for high‐throughput Raman analysis of dilute solutions

The use of Raman spectroscopy for the qualitative and quantitative analysis of dilute aqueous solutions is of interest to the biopharmaceutical manufacturing sector. However, the inherent weakness of the Raman effect, coupled with spectral variability due to spurious signals from sample holders, can produce significant problems for chemometric‐based high‐throughput assays. Therefore, there is a need for a multi‐well sample holder that ensures robust and repeatable measurements, in particular from dilute aqueous solutions such as cell culture media. Here we demonstrate the efficacy of a novel, electropolished, stainless steel multi‐well plate (SS‐MWP) sample holder with 96 wells for dilute aqueous solution analysis. A comprehensive study of the spectroscopic behaviour was carried out and comparisons made with multi‐well plates fabricated from polystyrene, polypropylene, and aluminium. A key factor in the validation studies is the use of intrinsically weak Raman scattering systems, e.g. water and dilute glucose solutions. The data collected show that the SS‐MWPs are much superior in terms of robustness, resistance to chemical attack, and measurement reproducibility and as such are the ideal sample holders for Raman analysis of dilute solutions. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface-enhanced Raman spectroscopy as a probe of competitive binding by anions to citrate-reduced silver colloids

Citrate-reduced silver colloids (CRSCs) are used extensively for surface-enhanced Raman scattering (SERS) studies of cations but are typically found to be ineffective for detection of anions unless they are treated with compounds that give them positively charged coatings. In this work CRSCs which were suitable for detection of anions were generated by treatment with aggregating agents that did not bind strongly to the silver surface. Under these conditions the major factor determining the enhancement of added anions was their ability to displace whatever anions were already present. In the case of CRSCs, residual citrate was observed when the colloids were aggregated with sulfate salts, since neither sulfate nor the residual nitrate displaced it. On addition of more strongly binding anions, such as halides, the citrate was displaced and the bands of the added analyte appeared, allowing them to be detected without the need for creation of positively charged coatings. It was found that the relative affinities of the anions, as determined by displacement experiments monitored by SERS, followed the solubilities of their silver salts, presumably because both properties are strongly dependent on the strength of the Ag-anion bonds. The relative affinities determine which anions can be detected in the presence of which others; nitrate, sulfate, and perchlorate are lower in the series than citrate and so are not observed. Displacement experiments show that dipicolinic acid (DPA) and Cl(-) have similar (stronger) binding, but they can be displaced in turn by Br(-) and I(-), which have the highest affinity and lowest solubility. This model allows a broad range of previous observations to be rationalized and allows the experimental conditions suitable for detection of particular new analytes to be designed on rational principles.     

Quantitative surface-enhanced Raman spectroscopy

The purpose of this tutorial review is to show how surface-enhanced Raman (SERS) and resonance Raman (SERRS) spectroscopy have evolved to the stage where they can be used as a quantitative analytical technique. SER(R)S has enormous potential for a range of applications where high sensitivity needs to be combined with good discrimination between molecular targets, particularly since low cost, compact spectrometers can read the high signal levels that SER(R)S typically provides. These advantages over conventional Raman measurements come at the cost of increased complexity and this review discusses the factors that need to be controlled to generate stable and reproducible SER(R)S calibrations.     

Correlation between biological activity and energies of electronic transitions in benzodiazepines. Negative ion mass spectrometry and ultraviolet absorption spectroscopy study of some derivatives

A correlation between the energies of electronic singlet transitions in benzodiazepines and their biological activity, which was revealed earlier by means of negative ion mass spectrometry with resonance electron capture, has been verified with a UV absorption spectroscopy investigation. Also, it has been noted that the energies of electronic singlet transitions in benzodiazepines are close in value to the ionization energies of atoms Cs, Rb, K, Na, Li and Tl, the cations of which are known to play an important role in nerve cell excitation processes. Copyright 1999 John Wiley & Sons, Ltd.     

Gas-phase deprotonation of arylalkylamines. A collision-induced dissociation study

The collision-induced dissociation (CID) of deprotonated arylalkylamines of general formula R(1)C(6)H(4)CHR(2)CH(2)NR(3)(2) (where R(1) = H, OH, F or NO(2); R(2) = H or OH; R(3) = H or CH(3)) generated by negative chemical ionization with H(2)O and D(2)O as ionizing reagents, is discussed. The negative chemical ionization mass spectra show that, in the absence of a hydroxy group in the aromatic ring, deprotonation takes place at the benzylic position whereas the proton is lost from the OH group when present. The nitro compound forms only M(-.) ions. The CID spectra of the deprotonated molecules show that fragmentations are strongly dependent on the structural features of the molecules, namely the presence or absence of substituents in the aromatic ring or aliphatic chain. Copyright 1999 John Wiley & Sons, Ltd.     

Purification and Characterization of Agarase from Marine Bacteria <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. PS12B and Its Use for Preparing Bioactive Hydrolysate from Agarophyte Red Seaweed <Emphasis Type="Italic">Gracilaria verrucosa</Emphasis>

Acinetobacter strain PS12B was isolated from marine sediment and was found to be a good candidate to degrade agar and produce agarase enzyme. The extracellular agarase enzyme from strain PS12B was purified by ammonium sulfate precipitation followed by DEAE-cellulose ion-exchange chromatography. The specific activity of the crude enzyme which was 1.52 U increased to 45.76 U, after two-stage purification, with an enzyme yield of 9.76%. Purified enzyme had a molecular mass of 24 kDa. The optimum pH and temperature for activity of purified agarase were found to be 8.0 and 40 °C, respectively. The K_m and V_max values for agarase were 4.69 mg/ml and 0.5 μmol/min, respectively. Treatment with EDTA reduced the agarase activity by 58% at 5 mM concentration. The enzyme activity was stimulated by the presence of Fe²⁺, Mn²⁺, and Ca2⁺ ions while reducing reagents (β-mercaptoethanol and dithiothreitol, DTT) enhanced its activity by 30–40%. The purified agarase exhibited tolerance to both detergents and organic solvents. Major hydrolysis products of agar were DP4 and also a mixture of longer oligosaccharides DP6 and DP7. The enzyme hydrolysed seaweed (Gracilaria verrucosa) exhibited strong antioxidant activity in vitro. Successful hydrolysis of seaweed indicates the potential use of the enzyme to produce seaweed hydrolysate having health benefits as well as the industrial application like the production of biofuels.