A Gerischer phase element in the impedance diagram of the polymer electrolyte membrane fuel cell anode

We study the isothermal hydrogen adsorption and reaction at the E-TEK electrode of a polymer electrolyte fuel cell with a Nafion 117 membrane by impedance spectroscopy at 30 degrees C. We find that the impedance diagram must include a Gerischer phase element. Constant phase elements are not sufficient to describe the experimental data. This means that an adsorption reaction takes place in combination with surface diffusion of hydrogen in the carbon layer located before the platinum surface, separate from the charge transfer step at the platinum particle surface. We are not able to distinguish between molecular or atomic hydrogen diffusion on carbon. We predict and find that the relaxation time of the adsorption step is independent of the applied potential. Water may also enter rate-limiting steps in the electrode reaction, but its role needs further clarification.     

Criteria for local equilibrium in a system with transport of heat and mass

Nonequilibrium molecular dynamics is used to compute the coupled heat and mass transport in a binary isotope mixture of particles interacting with a Lennard-Jones/spline potential. Two different stationary states are studied, one with a fixed internal energy flux and zero mass flux, and the other with a fixed diffusive mass flux and zero temperature gradient. Computations are made for one overall temperature,T=2, and three overall number densities,n=0.1, 0.2, and 0.4. (All numerical values are given in reduced, Lennard-Jones units unless otherwise stated.) Temperature gradients are up to T=0.09 and weight-fraction gradients up to w ₁=0.007. The flux-force relationships are found to be linear over the entire range. All four transport coefficients (theL-matrix) are determined and the Onsager reciprocal relationship for the off-diagonal coefficients is verified. Four different criteria are used to analyze the concept of local equilibrium in the nonequilibrium system. The local temperature fluctuation is found to be T0.03T and of the same order as the maximum temperature difference across the control volume, except near the cold boundary. A comparison of the local potential energy, enthalpy, and pressure with the corresponding equilibrium values at the same temperature, density, and composition also verifies that local equilibrium is established, except near the boundaries of the system. The velocity contribution to the BoltzmannH-function agrees with its Maxwellian (equilibrium) value within 1%, except near the boundaries, where the deviation is up to 4%. Our results do not support the Eyring-type transport theory involving jumps across energy barriers; we find that its estimates for the heat and mass fluxes are wrong by at least one order of magnitude.     

Extension of the self-consistent spectrophotometric basicity scale in acetonitrile to a full span of 28 pKa units: unification of different basicity scales

The earlier compiled self-consistent spectrophotometric basicity scale in acetonitrile (AN) was expanded to range from 3.8 to 32.0 pK(a) units, that is 28 orders of magnitude. Altogether 54 new relative basicity measurements (DeltapK(a) measurements) were carried out and 37 new compounds were introduced to the scale (it now includes altogether 89 bases). The relative basicity of any two bases in the scale can be obtained by combining at least two independent sets of measurements. Multiple overlapping measurements make the results more reliable. The overall consistency (as defined earlier) of the measurements is s = 0.03 pK(a) units. Thorough analysis of all of our experimental data (DeltapK(a) values of this and earlier works) and experimental pK(a) data in AN available in the literature (works from the groups of Coetzee and Padmanabhan, Kolthoff and Chantooni, Jr., the Schwesinger group, Bren' et al. and some others, altogether 19 papers) was carried out. On the basis of this analysis the anchor point of the scale-pyridine-was shifted upward by 0.20 pK(a) units thereby also revising the absolute pK(a) values of all the bases on the scale. This way very good agreement between our relative data and the absolute pK(a) values of the abovementioned authors was obtained. The revised basicity scale was interconnected with the earlier published self-consistent acidity scale by DeltapK(a) measurements between acids and bases. The rms deviation between the directly measured DeltapK(a) values and the absolute pK(a) values of the compounds was 0.10 pK(a) units.     

Local Thermodynamic Description of Isothermal Single-Phase Flow in Simple Porous Media

Transport in Porous Media - Darcy’s law for porous media transport is given a new local thermodynamic basis in terms of the grand potential of confined fluids. The local effective pressure...     

A simple Maxwell-Wagner-Butler-Volmer approach to the impedance of the hydrogen electrode in a nafion fuel cell

A simple one-dimensional model of the impedance of a hydrogen/Nafion electrode is set up combining the usual Maxwell-Wagner approach for linear, homogeneous, and isotropic media with the linearized Butler-Volmer equation for the interfacial, electrochemical reaction. Only one relaxation semicircle is normally seen in the Nyquist diagram, but a low-frequency arc may appear at high overvoltages. The model is described by only two dimensionless parameters (in addition to the dimensionless frequency). These parameters are related to the double-layer capacitance and to the interfacial electrochemical reaction rate, respectively. With some adjustments, the model can be used to explain the observed equilibrium impedance from 40 to 70 degrees C of a symmetric cell of the type C/Pt/H(2)|Nafion 117/H(2)/Pt/C. The hydrogen electrodes in this cell were built up as a disperse multiphase region (carbon, platinum grains, Nafion 117, and hydrogen gas) as commonly done in solid polymer fuel cells.     

ATR-FT-IR spectroscopy in the region of 550–230 cm−1 for identification of inorganic pigments

A comprehensive study of ATR-FT-IR spectra of 40 inorganic pigments of different colours widely used in historical paintings has been carried out in the low wave number spectral range (550–230 cm^?1). The infrared spectra were recorded from mixtures of pigment and linseed oil. It is demonstrated that this spectral range – essentially devoid of absorption peaks of the common binder materials – can be well used for identification of inorganic pigments in paint samples thereby markedly extending the possibilities of pigment identification/confirmation by ATR-IR spectroscopy into the realm of pigments having no absorptions in the mid-IR region. In some cases the method can be used alone for pigment identification and in many cases it provides useful additional evidence for pigment identification using other instrumental techniques (electron microprobe analysis, XRF, optical microscopy). Together with earlier work this study provides a comprehensive overview of the pigment identification possibilities using ATR-FT-IR as well as a collection of reference spectra and is expected to be a useful reference for conservation practitioners.     

Three steps in the anode reaction of the polymer electrolyte membrane fuel cell. Effect of CO

We studied the influence of CO poisoning of the anode in the polymer electrolyte membrane fuel cell (PEMFC) using electrochemical impedance spectroscopy (EIS). The anode impedance was found by first feeding neat hydrogen gas and next hydrogen with CO into one of the electrodes, keeping neat hydrogen gas on the other electrode as a reference. The electrodes were E-TEK Elat gas-diffusion electrodes with 0.5 mg Pt/cm², and the membrane was Nafion^® 117. The CO concentration was 103 ppm, and the total pressures were 1, 2.5 and 4 bar. Operating temperatures were kept constant, 30.0 °C or 50.0 ± 0.1 °C. Bias voltages of 0 and 0.05 V were used. Three steps were revealed in the reaction mechanism, the slow adsorption/diffusion step, the charge transfer step and the proton hydration step, confirming earlier results. Carbon monoxide affects the charge transfer step by blocking active sites and by affecting the surface polarisation. We further conclude that CO adsorbs to the porous carbon matrix, and reduces significantly the rate of surface diffusion of hydrogen to the surface.     

Water structure and dynamics at a silica surface: Pake doublets in 1H NMR spectra

Detailed knowledge about the dynamics and structure of liquids in the vicinity of a solid surface is important in several fields of research. In this study a homogeneous model system of colloidal and nonporous silica particles with a narrow particle size distribution was used to examine such properties of adsorbed water and 1-heptanol. Doublet (1)H water resonances ("Pake doublets") indicate a preferred spatial orientation for the water molecules, as well as a lower molecular density in the surface-induced water structures compared to bulk water. These surface-induced structures are found to extend at least 8 nm from the silica surface. T(1) relaxation measurements at several temperatures indicate weaker H-bonding in the adsorbed water compared to bulk water. T(2) relaxation measurements at several temperatures reveal the presence of two water phases and give quantitative information on the mobility of water molecules and proton exchange processes. The presence of 1-heptanol changes the water characteristics, primarily in the water phase closer to the surface, where water molecules experience decreased translational and increased rotational freedom. In the absence of water, adsorbed 1-heptanol forms surface aggregates encompassing several molecular layers, where the first adsorbed layer shows severe restrictions in mobility and subsequent layers are more mobile.