Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Effect of carbon chain length of monocarboxylic acids on cloud point temperature of poly(2-ethyl-2-oxazoline)

The temperature-induced phase transition of poly(2-ethyl-2-oxazoline) (PEtOx) aqueous solution under mixing with a series of small carboxylic acids has been studied by turbidity measurements and laser light scattering. It has been found that cloud point temperature (T _cp) of the PEtOx was changed to varying degrees depending upon the pH, ionic strength, molar ratio of acids to 2-ethyl-2-oxazoline unit, and carbon chain length of small carboxylic acids. Significant change in T _cp was observed in the case of hexanoic acid. At acidic pH, an increase in the molar ratio of hexanoic acid to the 2-ethyl-2-oxazoline unit gradually decreased the phase transition temperature of the polymer as compared to the T _cp of pure PEtOx. At original pH 6 (pH?>?pK _a), T _cp shifts to higher value than that of pure PEtOx for lower molar ratios and decreased later on with increasing the molar ratio. The shift in the T _cp is described based on the differences in the driving force of phase transition, including hydrogen bonding between small carboxylic acids and PEtOx polymer and hydrophobic interaction.     

Ethyl Acetate—Propionic Acid as Green Mobile Phase System for Selective Densitometric Identification of Maltose with Preliminary Separation on Silica High-Performance Thin-Layer Chromatographic Plates

JPC – Journal of Planar Chromatography – Modern TLC - A mobile phase system comprising of ethyl acetate and propionic acid in 1:1 (v/v) ratio was identified as the most suitable green...     

Fiber push-out study of a copper matrix composite with an engineered interface: Experiments and cohesive element simulation

The fiber push-out test is a basic method to probe the mechanical properties of the fiber/matrix interface of fiber-reinforced metal matrix composites. In order to estimate the interfacial properties, parameters should be calibrated using the measured load–displacement data and theoretical models. In the case of a soft matrix composite, the possible plastic yield of the matrix has to be considered for the calibration. Since the conventional shear lag models are based on elastic behavior, a detailed assessment of the plastic effect is needed for accurate calibration. In this paper, experimental and simulation studies are presented regarding the effect of matrix plasticity on the push-out behavior of a copper matrix composite with strong interface bonding. Microscopic images exhibited significant local plastic deformation near the fibers leading to salient nonlinear response in the global load–displacement curve. For comparison, uncoated interface with no chemical bonding was also examined where the nonlinearity was not observed. A progressive FEM simulation was conducted for a complete push-out process using the cohesive zone model and inverse fitting. Excellent coincidence was achieved with the measured push-out curve. The predicted results confirmed the experimental observations.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

Thermal and pH Dual Responsive Copolymer and Silver Nanoparticle Composite for Catalytic Application

N‐Isopropylacrylamide and vinyl imidazole copolymer, P(NIPAM‐co‐VI), was synthesized by free radical emulsion polymerization. Then, the copolymer and silver nanoparticle composite, P(NIPAM‐co‐VI)‐Ag, was prepared by in situ reduction of AgNO₃ with NaBH₄. Due to the coexistence of thermal‐responsive PNIPAM and pH‐responsive PVI, P(NIPAM‐co‐VI) and P(NIPAM‐co‐VI)‐Ag exhibited both thermal and pH responsibility, their size would change while altering the temperature or pH of the circumvent. Their thermal and pH dual responsive properties were studied by dynamic light scattering (DLS). P(NIPAM‐co‐VI)‐Ag could be stably dispersed in water at a pH range from 3.0 to 9.3, which is favorable to use P(NIPAM‐co‐VI)‐Ag as a catalyst in the reduction reaction of p‐nitrophenol. The reaction rate constant (k_app) increased with the decrease of pH or the increase of VI content in the copolymer.     

Grafting of poly(sodium styrenesulfonate) onto gold surface from NaNO<Subscript>3</Subscript> solution

The chemical grafting of thiol terminated poly(sodium styrenesulfonate)(HS-PSSS) chains from sodium nitrate (NaNO_3) salt solution to a gold surface was investigated with a quartz crystal microbalance with dissipation monitoring (QCM-D) in different salt concentrations.It was found that at low salt concentration grafting density of HS-PSSS was low and the grafted chains adopted a mushroom conformation.With the increase of salt concentration polyelectrolyte chains underwent a transition toward coiled stat...     

Urease inhibition and anti-leishmanial assay of substituted benzoylguanidines and their copper(II) complexes

A series of N,N',N'-trisubstituted guanidines (1-6) and their copper(II) complexes, [κ(2)(O,N)-C(6)H(5)CONHC(NHC(6)H(4)Cl)NR](2)Cu(ii) (R = iso-propyl (1a), n-butyl (2a), sec-butyl (3a), tert-butyl (4a), benzyl (5a), and para-tolyl (6a)) were synthesized and characterized using elemental analysis, FTIR and NMR spectroscopy. DFT studies were used to assess the location of the protons in the free ligands. However, calculations have shown that, in all cases, hydrogen bonding from either N-H group gives conformations that are very similar in energy. Single crystal XRD studies were used to characterize ligands 1 and 4 and the related complexes 1a and 4a. The structures reveal that these complexes are mononuclear in the solid state and that copper adopts a regular square planar geometry. In both metallic species, the N, N', N'-trisubstituted guanidine ligands chelate the Cu(II) atom using the oxygen and one nitrogen. The synthesized compounds were investigated for urease inhibition using thiourea as a standard drug. Most complexes exhibit a better activity than the respective guanidines and compound 1a was found to be the most active with IC(50) = 9.83 ± 0.07 μM (the IC(50) for thiourea is 21.0 ± 0.1 μM). The species were also screened for their anti-leishmanial activity. However, all of the compounds were devoid of any significant activity.     

A comparative study of the thermodynamic properties at the air–water interface and in the bulk of structurally related phenothiazine drugs aqueous solutions

Surface tension, conductivity, density, and ultrasound velocity measurements have been performed in order to determine in a systematic manner some of the aggregation properties of the phenothiazine drugs promazine and triflupromazine hydrochlorides. Both drugs are structurally related, differing in an extra CF₃ group in the triflupromazine molecular structure. Surface tension data showed that the presence of an extra CF₃ in the molecular structure of triflupromazine involves a higher hydrophobicity of this drug and a restriction in the number of conformations molecules can adopt due to the presence of this bulkier atomic group. This involves a larger surface area in order to accommodate triflupromazine molecules at the interface. From conductivity measurements at different temperatures, the thermodynamic quantities of the micellization process of these drugs indicate that the aggregation is a spontaneous process, mainly enthalpic, where the London-dispersion forces play an active role. Using density and ultrasound velocity measurements, apparent molar volume and adiabatic compressibility of aqueous solutions of the amphiphilic cationic drugs have been determined. Positive deviations from the Debye–Hückel limiting law of the apparent molar volume were obtained from both drugs over the whole temperature range, which provides evidence of possible pre-association at concentrations below the critical concentration. Apparent molar adiabatic compressibility of the aggregates formed by these drugs was typical of those corresponding for an aggregate formed by a stacking process.