Shielded Sliding Discharge-Assisted Hydrocarbon Selective Catalytic Reduction of NOx over Ag/Al2O3 Catalysts Using Diesel as a Reductant

The nonthermal plasma generated in a shielded sliding discharge reactor was used to reform diesel for the hydrocarbon-selective catalytic reduction (HC-SCR) of NO_x on Ag/Al₂O₃ catalysts. Compared with raw diesel, the reformed diesel enhanced the NO_x reduction efficiency, mitigated hydrocarbon poisoning of the catalyst and reduced the fuel penalty for the HC-SCR reaction. The NO_x conversion values obtained with a commercial Ag/Al₂O₃ catalyst exceeded that of a 2.0 wt% Ag/Al₂O₃ catalyst prepared by wet impregnation. A significant amount of NH₃ was produced as a by-product during the HC-SCR reaction, which suggests that further NO_x conversion enhancement can be achieved by placing a second NH₃-SCR catalyst in series with the Ag/Al₂O₃ catalyst.     

铁镍钴矩磁合金的铁心损耗

本文研究了经过纵向磁退火的铁镍钴合金带的铁心损耗,发现P/f-f曲线具有明显的反常行为。用180°畴壁移的反常涡流损耗理论模型做了解释。并提出一些减小损耗的可能途径。     

交直流叠加磁化下恒导磁薄片的反常涡流损耗

本文利用一致畴转模型分析了在交直流叠加磁化下恒导磁薄片的低频涡流损耗。指出涡流损耗的反常不仅壁移,而且同样存在于畴转。其原因是畴转过程中畴内磁导率是张量,从而比经典模型增加了一项“侧向涡流”。导出了转动涡流损耗反常系数η_r的表达式;并将结果在某些应用领域中作了推广,得出了相应的结论。     

高合金钢光谱分析准确度改进试验

在我国钢铁厂中,高合金钢的光谱分析受到准确度的限制,没有普遍展开。通过对两种有代表性的高合金钢,即P18高速钢及Я1不锈钢的试验,证明用摄谱方法采取种种改进以后,高合金钢的分析约可达到最小的百分均方误差1％左右。文中对某些工厂的先进经验曾加以介绍。对于高合金钢的准确度问题曾予讨论。