Glass transition measurements of asphalts by DSC

The glass transition temperature (T_g), measured by Modulated Differential Scanning Calorimetry (MDSC), is related to the flow characteristics of asphalt at low temperatures as is the rate of change of the creep stiffnessm. This study compared the glass transition temperature of different asphalts (neat, chemically modified, and crumb rubber modified asphalts) with the creep stiffness, the rate of change of creep stiffness, and the low specification temperature of the continuous PG grading of those asphalts.From the rheological data (BBR) and the thermal data (MDSC) for the virgin and the modified asphalts, the modified products had the same variations of values ofm, S, and T_g at lower temperatures as those of their corresponding virgin asphalts. A correlation between the T_g andm value was observed for both the modified and unmodified asphalts. Since DSC measurements for asphalt low temperature properties use less operator time, less sample, and have less measurement and operator error than rheological methods, T_g has promise to be considered as a fast and easy laboratory method to obtain the low temperature useful range of asphalts in pavements.The authors would like to acknowledge Susan P. Needham for her work in conducting rheological testing for the modified and unmodified asphalts.     

Fermi resonances in the Raman spectra of alkali halide/BH4−

Raman spectra of a series of alkali-halide/BH^?₄ (and BD^?₄ crystals have been obtained. These spectra show some interesting examples of Fermi resonance type interactions between the stretching mode levels and overtone and combination band levels of the bending modes. Two resonances will be considered: (i) that between ν₁ and 2ν₄(A₁), and (ii) that between ν₃, 2ν₄ (F₂) and (ν₂+ν₄) (F₂).The F₂ resonance between ν₃, 2ν₄ and ν₂+ν₄ appears in the infrared spectrum and it has been studied on several occasions. However the equivalent Raman spectrum is of interest because the relative intensities of the bands are significantly different to those shown by the infrared spectrum.In the A₁ (and E) Raman spectrum of the stretching mode region there are two strong bands for each for the ¹⁰B and ¹¹B isotopes. The ν₁ would not be expected to show any ¹⁰B and ¹¹B splitting, but the observed bands are both closely resonating mixtures of ν₁ and 2ν₄(A₁). In fact the analysis shows that the stronger band has the higher proportion of 2ν₄ character, and the larger isotopic shift of the more intense band can then be seen to be reasonable.     

The use of microemulsions in flow injection analysis: Spectrofluorimetric determination of primary amines

The use of microemulsion in flow-injection systems is considered, with particular reference to the determination of C₆C₁₀ primary amines by derivatization with o-phthal-aldehyde and 2-mercaptoethanol. Microemulsions provide an ideal interface for reactions between a water-soluble reagent and a non-aqueous sample. The effect of reaction conditions (R value, droplet concentration, pH and flow rate) on the fluorescence signal is discussed and calibration data for three primary alkylamines are given.     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.     

Synthesis and Comparison of Extraction Properties of p‐tert‐Butylcalix[n]arene Nitrile Derivatives for Selected Metals and Dichromate Anions

The article describes the syntheses and extraction properties of two p‐tert‐butylcalix[6]arene nitrile derivatives (3 and 4). The trinitrile derivative 3 has been synthesized from 5,11,17,23,29,35‐hexa‐tert‐butyl‐37,38,39,40,41,42‐hexahydroxycalix[6]arene 1. The compound 1 was directly converted to its hexanitrile derivative 4. In these syntheses, it was thought to explore the role of nitrile sites in the extraction of various metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions. The liquid‐liquid extraction properties of 3 and 4 towards selected alkali/transition metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions are reported. It has been observed that receptor 3 does not extract alkali/transition metal cations effectively, but shows affinity towards HCr₂O₇ ^?/Cr₂O₇ ^2? anions at low pH. The compound 4 is an effective form for transferring Ni²⁺ selectively, while it shows poor transferring ability for HCr₂O₇ ^?/Cr₂O₇ ^2? anions from an aqueous into a dichloromethane layer. It was observed that the cavity size of the calix[n]arenes and the cooperativity of the functionalities play important roles in two phase extraction systems.     

Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Simple gas chromatographic method for the quantification of total cholesterol in fish meats

Six fish species-Cirrhinus mrigala (Morakhi), Labeo rohita (Danbhro), Catla catla (Thalli), Wallago attu (Jarko), Ctenopharyngodon idella (Grass), and Cyprimus carpio (Gulfam)--commonly found in the Pakistani Indus river, were selected for fat and cholesterol evaluation. Fat content was quantified by the Folch method and cholesterol content was determined by a simple GC method. The application of the proposed method to quantify cholesterol content revealed variations among the six breeds evaluated. The breeds studied contained 0.80-1.95% fat, indicating that all investigated fishes were lean; significant variation was found in cholesterol content, and ranged between 72 and 392 mg/100 g. Standard addition analyses showed that the method was accurate, as the recovery of cholesterol varied from 95 to 103%, with a coefficient of variance not more than 5.6%. The results showed that, after the development of suitable calibration, within 11 min, the cholesterol could be accurately determined by GC.     

Bifunctional Calix[4]arene Sensor for Pb(II) and Cr2O7 2− Ions

A readily available chromionophore 5,11,17,23-tetra-tert-butyl-25,27-bis(hydrazidecarbonylmethoxy)-26,28-dihydroxycalix[4]arene (HCC4) was employed as a chromogenic sensing probe selective for Pb(II) and Cr₂O₇ ^2? ions among a series of various ions such as Li(I), Na(I), K(I), Rb(I), Ba(II), Sr(II), Al(III), Cd(II), Co(II), Cu(II), Hg(II), Ni(II), Pb(II) and Zn(II) as well as Cr₂O₇ ^2?, CH₃CO₂ ^?, Br^?, Cl^?, F^?, I^?, ClO₄ ^? and NO₃ ^? that have been examined by UV-visible and fluorescence spectroscopic techniques. The HCC4 in DCM-MeCN system forms 2:1 (ligand-metal) complex with Pb(II). It also shows 2:1 stoichiometry with Cr₂O₇ ^2?. The complexation phenomenon has been confirmed by FTIR spectroscopy that favors the selective nature of HCC4 with Pb(II) and Cr₂O₇ ^2?. Thermal gravimetric analysis (TGA) also supports its utility in drastic conditions.     

An efficient p-tetranitrocalix[4]arene based adsorbent for the removal of carbofuran from aqueous media

Present study describes the adsorption of carbofuran (CF) from aqueous solutions using p-tetranitrocalix[4]arene based modified silica through batch and column methods. Various parameters were optimized including initial pesticide concentrations (5 mg L^?1), pH (2–10), contact time (60 min) and adsorbent dosage (30 mg). Modified silica was characterized by FT-IR and scanning electron microscope. The adsorption was further explained by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models. Moreover, adsorption kinetics and adsorption thermodynamics were also investigated. Adsorption in dynamic mode was evaluated by breakthrough volumes and the Thomas model, applying batch conditions using 30 mg of modified silica at pH 5. It has been noticed that CF removal efficiency of modified silica was 98 % as compared to bare silica (48 %). Adsorption of CF on modified silica was found to be multilayer and physical in nature. Consequently, adsorption obeys pseudo-second-order kinetic equation following external mass transfer diffusion process as the rate-limiting step. Thermodynamic parameter (ΔG, ΔS, ΔH) values suggest that the adsorption of CF is spontaneous and exothermic in nature. Thomas model rate constant k _TH (cm³ mg^?1 min^?1) and maximum solid phase concentration (q _o mg g^?1) was found to be 0.52 and 12.3, respectively, in dynamic mode.     

A new calix[4]arene Schiff base sensor for Hg<Superscript>2+</Superscript> and Au<Superscript>3+</Superscript>

This article reports the selective sensing ability of a newly synthesized calix[4]arene Schiff base (C4TSB) derivative. C4TSB exhibited strong turn-off fluorescence affinity for Hg²⁺ and Au³⁺. The selective sensing ability of receptor was investigated in the presence of different co-existing competing ions. The limit of detection for Hg²⁺ and Au³⁺ was determined as 1.9 × 10^?5 and 1.0 × 10^?6 M, respectively. Receptor forms 1:1 stoichiometric complex with both metals and their binding constants were calculated as 7.9 × 10³ M^?1 for Hg²⁺ and 5.7 × 10³ M^?1 for Au³⁺. Complexes were also characterized through FT-IR spectroscopy.