Synthesis and characterization of polyaniline doped with organic acids

Spectroscopic [UV–visible and Fourier transform IR (FTIR)] and thermal properties of chemically synthesized polyanilines are found to be affected by varying the protonation media (acetic, citric, oxalic, and tartaric acid). The optical spectra show the presence of a greater fraction of fully oxidized insulating pernigraniline phase in polyaniline doped with acetic acid. In contrast, the selectivity in the formation of the conducting phase is higher in oxalic acid as a protonic acid media. The FTIR spectra of these polymers reveal a higher ratio of the relative intensities of the quinoid to benzenoid ring modes in acetic acid doped polyaniline. Scanning electron micrographs revealed a sponge‐like structure derived from the aggregation of the small granules in acetic acid and oxalic acid doped polyaniline. A three‐step decomposition pattern is observed in all the polymers, regardless of the protonic acid used for the doping. The second step loss related to the loss of dopant is found to be higher in the oxalic acid doped polymer. In accordance with these results the conductivity is also found to be higher in oxalic acid doped material. The temperature dependent conductivity measurements show the thermal activated behavior in all the polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2043–2049, 2004     

Strong, low-energy two-photon absorption in extended amine-terminated cyano-substituted phenylenevinylene oligomers

Three quadrupolar oligophenylenevinylenes with five rings in the conjugated backbone, terminal donor groups, and various acceptors and/or donors along the backbone were synthesized and their two-photon spectroscopic properties investigated. These chromophores exhibit large two-photon absorption cross sections over a wide wavelength range and two distinct peaks, the strongest of which (deltamax > 3600 GM) is observed at 960-970 nm, a wavelength close to twice the value of the linear absorption maximum (2lambda(1)max). The findings on these chromophores are compared with those for analogous molecules with shorter conjugation length, for which the main two-photon band is at significantly shorter wavelength than 2lambda(1)max.     

Free-standing metal–organic framework (MOF) monolayers by self-assembly of polymer-grafted nanoparticles

We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles. UiO-66, UiO-66-NH₂, and MIL-88B-NH₂ were functionalized with a catechol-bound chain-transfer agent (CTA) to graft poly(methyl methacrylate) (PMMA) from the surface of the MOF using reversible addition-fragmentation chain transfer polymerization (RAFT). The polymer-coated MOFs were self-assembled at the air–water interface into monolayer films ∼250 nm thick and capable of self-supporting at a total area of 40 mm². Mixed-particle films were prepared through the assembly of MOF mixtures, while multilayer films were achieved through sequential transfer of the monolayers to a glass slide substrate. This method offers a modular and generalizable route to fabricate thin-films with inherent porosity and sub-micron thickness composed of a variety of MOF particles and functionalities.

We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles.     

HRTEM image simulations for the study of ultrathin gate oxides.

We have performed high resolution transmission electron microscope (HRTEM) image simulations to qualitatively assess the visibility of various structural defects in ultrathin gate oxides of MOSFET devices, and to quantitatively examine the accuracy of HRTEM in performing gate oxide metrology. Structural models contained crystalline defects embedded in an amorphous 16-A-thick gate oxide. Simulated images were calculated for structures viewed in cross section. Defect visibility was assessed as a function of specimen thickness and defect morphology, composition, size, and orientation. Defect morphologies included asperities lying on the substrate surface, as well as "bridging" defects connecting the substrate to the gate electrode. Measurements of gate oxide thickness extracted from simulated images were compared to actual dimensions in the model structure to assess TEM accuracy for metrology. The effects of specimen tilt, specimen thickness, objective lens defocus, and coefficient of spherical aberration (Cs) on measurement accuracy were explored for nominal 10-A gate oxide thickness. Results from this work suggest that accurate metrology of ultrathin gate oxides (i.e., limited to several percent error) is feasible on a consistent basis only by using a Cs-corrected microscope. However, fundamental limitations remain for characterizing defects in gate oxides using HRTEM, even with the new generation of Cs-corrected microscopes.     

Synthesis, structure, and spectroscopy of phenylacetylenylene rods incorporating meso-substituted dipyrrin ligands

The synthesis, structure, and spectroscopic characterization of a series of phenylacetylenylene rodlike molecules containing dipyrromethene (dipyrrin) ligands are described. The combination of the phenylacetylenylene groups with the porphyrinogenic dipyrrin moieties results in a rich absorption spectroscopy for these compounds, although the fluorescence of the phenylacetylenylene moiety is quenched by presence of the dipyrrin chelator. The Cu(2+) and Fe(3+) complexes of these ligands have been prepared and three of these compounds have been structurally characterized by using single-crystal X-ray diffraction. Unlike other octahedral metal-dipyrrin complexes described to date, one of the iron complexes demonstrates ideal threefold symmetry in the solid-state. The elongated structure and high symmetry of these complexes suggests the use of these meso-substituted phenylacetylenylene ligands as an interesting class of extended, branched molecules for the construction of supramolecular architectures.     

Dynamics of solvation and rotational relaxation of Coumarin 153 in ionic liquid confined nanometer-sized microemulsions

The effects of confinement of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate on solvation dynamics and rotational relaxation of Coumarin 153 (C-153) in Triton X-100/cyclohexane microemulsions have been explored using steady-state and picosecond time-resolved emission spectroscopy. The steady-state and rotational relaxation data indicate that C-153 molecules are incorporated in the core of the microemulsions. The average rotational relaxation time increases with increase in w ([bmim][BF(4)]/[TX-100]) values. The solvent relaxation in the core of the microemulsion occurs on two different time scales and is almost insensitive to the increase in w values. The solvent relaxation is retarded in the pool of the microemulsions compared to the neat solvent. Though, the retardation is very small compared to several-fold retardation of the solvation time of the conventional solvent inside the pool of the microemulsions.     

Ab initio study of AmCl(+): f-f spectroscopy and chemical binding

A valence full configuration interaction study with a polarized double-zeta quality basis set has been carried out for the lowest 49 electronic states of AmCl(+). The calculations use a pseudopotential treatment for the core electrons and incorporate a one-electron spin-orbit interaction operator. Electrons in the valence s, p, d, and f subshells were included in the active space. The resulting electronic potential energy curves are largely repulsive. The chemical bonding is ionic in character with negligible participation of 5f electrons. The molecular f-f spectroscopy of AmCl(+) arises essentially from an in situ Am(2+) core with states slightly redshifted by the presence of chloride ion. Am(+)+Cl asymptotes which give rise to the few attractive potential energy curves can be predicted by analysis of the f-f spectroscopy of isolated Am(+) and Am(2+). The attractive curves have substantial binding energies, on the order of 75-80 kcal/mol, and are noticeably lower than recent indirect measurements on the isovalent EuCl(+). An independent empirical correlation supports the predicted reduction in AmCl(+) binding energy. The energies of the repulsive curves are strongly dependent on the selection of the underlying atomic orbitals while the energies of the attractive curves do not display this sensitivity. The calculations were carried out using our recently developed parallel spin-orbit configuration interaction software.