Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Organic–Inorganic Hybrid Gold Halide Perovskites: Structural Diversity through Cation Size

Crystal structures of a series of organic–inorganic hybrid gold iodide perovskites, formulated as A₂[Au^II₂][Au^IIII₄] [A=methylammonium (MA) ( 1 ) and formamidinium (FA) ( 2 )], A′₂[I₃]_1−x[Au^II₂]_x[Au^IIII₄] [A′=imidazolium (IMD) ( 3 ), guanidinium (GUA) ( 4 ), dimethylammonium (DMA) ( 5 ), pyridinium (PY) ( 6 ), and piperizinium (PIP) ( 7 )], systematically changed depending on the cation size. In addition, triiodide (I₃⁻) ions were partly incorporated into the AuI₂⁻ sites of 3 – 7 , whereas they were not incorporated into those of 1 and 2 . Such a difference comes from the size of the organic cation. Optical absorption spectra showed characteristic intervalence charge-transfer bands from Au^I to Au^III species, and the optical band gap increased as the size of the cation became larger.     

Synthesis and biological activities of analogs of a lipid A biosynthetic precursor: 1-O-phosphonooxyethyl-4'-O-phosphono-disaccharides with (R)-3-hydroxytetradecanoyl or tetradecanoyl groups at positions 2, 3, 2' and 3'.

Two novel analogs of a biosynthetic precursor of lipid A (2) were synthesized. The one analog (3) has acyl groups identical to those of 2, and the other (4) has tetradecanoyl groups in place of the (R)-3-hydroxytetradecanoyl groups of 2. Both 3 and 4 possess an alpha-glycosidically-bound phosphonooxyethyl group in place of the alpha-glycosyl phosphate group of 2. Compounds 3 and 4 exhibited definite antitumor activity against Meth A fibrosarcoma and low toxicity in rabbits, as the original compound 2 does. The replacement of the hydroxytetradecanoyl groups with tetradecanoyl groups barely affected the antitumor activity, but slightly enhanced the toxicity in rabbits.     

Alternating copolymerization of carbon dioxide and epoxide by manganese porphyrin: The first example of polycarbonate synthesis from 1-atm carbon dioxide

The first successful example of the formation of polycarbonate from 1-atm carbon dioxide and epoxide was demonstrated by the alternating copolymerization of carbon dioxide and epoxide with manganese porphyrin as a catalyst. The copolymerization of carbon dioxide and cyclohexene oxide with (porphinato)manganese acetate proceeded under the 1-atm pressure of carbon dioxide to give a copolymer with an alternating sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3549–3555, 2003     

Gas transport through homogeneous and asymmetric polyethersulfone membranes

Both homogeneous and asymmetric polyethersulfone (PES) membranes were prepared by solvent casting. The sorption and permeation behavior of CO₂, O₂, and N₂ using these two kinds of cast PES membranes and commercially available homogeneous PES film was investigated to extract the pressure dependence of gas permeability and the permselectivity for CO₂ relative to N₂, and to confirm the validity of the working assumption that a skin layer in an asymmetric membrane can be essentially replaced by a thick homogeneous dense membrane. The pressure dependence of the mean permeability coefficient to CO₂ in homogeneous membranes obeys the dual-mode mobility model. The ideal separation factor for CO₂ relative to N₂ at an upstream pressure of 0.5 MPa attains ca. 40, while the permeability to CO₂ is about 2.7 Barrer at the same upstream pressure. The same separation factor in asymmetric membranes amounts to 35. The diffusion behavior for the skin layer in an asymmetric membrane with a thin skin layer can be simulated approximately by that in a homogeneous dense membrane. © 1993 John Wiley & Sons, Inc.     

A new series of antiallergic agents. I. Synthesis and activity of 11-(2-aminoethyl)thio-6,11-dihydrodibenz[b,e]oxepin derivatives.

A new series of 11-substituted 6,11-dihydrodibenz[b,e]oxepin derivatives was synthesized and evaluated for antiallergic activity. Convenient methods for the preparation of sulfides from alcohols were developed. Structure-activity relationships are described. Compound 7, 11-[2-(dimethylamin)ethyl]thio-6,11-dihydrodibenz[b,e] oxepin-2-carboxylic acid hydrochloride, was the most potent in the rat passive cutaneous anaphylaxis test (ED50 = 0.92 mg/kg p.o.). It had a potent inhibitory effect on anaphylactic bronchoconstriction in guinea pigs (ED50 = 0.029 mg/kg p.o.) and H1 receptor antagonistic effect (Ki = 14 nM) with few central nervous system side effects. Additionally, an antagonistic effect against prostaglandin D2-induced contraction of isolated guinea pig trachea (pA2 = 5.73) was an attractive mechanism of action of the new antiallergic agent. Compound 7 was selected for further evaluation as KW-4994.     

Metal-metal d-d interaction through the discrete stacking of mononuclear M(II) complexes (M = Pt, Pd, and Cu) within an organic-pillared coordination cage

Two molecules of planar MII(acac)2 complexes (M = Pt, Pd, and, Cu; acac = acetylacetonato) are efficiently stacked within an organic-pillared coordination cage, exhibiting characteristic spectroscopies (for M = Pt and Pd) and electron spin-spin coupling (for M = Cu) attributable to metal-metal interaction.     

A racemization test in peptide synthesis using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM)

Racemization of the C-terminal amino acid (Ala) has been studied in various solvents during coupling between 4-methoxybenzyloxycarbonyl (Z(OMe))-Gly-L-Ala-OH and phenylalanine benzyl ester (H-Phe-OBzl) with 4-(4,6-dimethoxy-1,3,5-thiazin-2-yl)-4-methylmorpholinium chloride (DMT-MM). The reaction occurred without substantial racemization in AcOEt, tetrahydrofuran (THF), N,N-dimethylformamide (DMF), CH3CN, and 2-PrOH, while a slight racemization was observed in dimethyl sulfoxide (DMSO), EtOH, and MeOH. The extent of racemization may correlate with the polarity of the solvents.     

Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.