Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Simultaneous determination of lead(II) and cadmium(II) at a diacetyldioxime modified carbon paste electrode by differential pulse stripping voltammetry

A simple and effective chemically modified carbon paste electrode (CMCPE) for the simultaneous determination of lead(II) and cadmium(II) was developed in this work. The electrode was prepared by the addition of diacetyldioxime into a carbon paste mixture. Pb²⁺ and Cd²⁺ were preconcentrated on the surface of the modified electrode by complexing with diacetyldioxime and reduced at a negative potential (−1.10 V). Then the reduced products were oxidized by differential pulse stripping. The fact that two stripping peaks appeared on the voltammograms at the potentials of −0.65 V (Cd²⁺) and −0.91 V (Pb²⁺) demonstrates the possibility of simultaneous determination of Pb²⁺ and Cd²⁺. Under the optimized working conditions, calibration graphs were linear in the concentration ranges of 1.0×10⁻⁷-1.5×10⁻⁵ mol l⁻¹ (Pb²⁺) and 2.5×10⁻⁷-2.5×10⁻⁵ mol l⁻¹ (Cd²⁺), respectively. For 5 min preconcentration, detection limits of 1×10⁻⁸ mol l⁻¹ (Pb²⁺) and 4×10⁻⁸ mol l⁻¹ (Cd²⁺) were obtained at the signal noise ratio (SNR) of 3. To evaluate the reproducibility of the newly developed electrode, the measurements of 5×10⁻⁷ mol l⁻¹ Pb²⁺ and Cd²⁺ were parallel carried out for six times at different electrodes and the relative standard deviations were 2.9% (Pb²⁺) and 3.2% (Cd²⁺), respectively. Interferences by some metals were investigated. Only Ni²⁺ and Hg²⁺ apparently affected the peak currents of Pb²⁺ and Cd²⁺. The diacetyldioxime modified carbon paste electrode was applied to the determination of Pb²⁺ and Cd²⁺ in water samples. The results indicate that this electrode is sensitive and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

CATIONIC CONDUCTIVITY FOR THE CROSSLINKED P [OLIGO (OXYETHYLENE) METHACRYLATE-COoMETHACRYLOYL ALKYLSULFONIC ACID LITHIUM]

Crosslinked copolymers with single Li~+-ionic conductivity were prepared from oligo (oxyethylene) methacrylate (MEO_n), methacryloyl alkylsulfonic acid lithium (SAMLi), and oligo (oxyethylene) dimethacrylate (DMEO_n). Li~+-ionic conductivity of the copolymer is improved by crosslinking and presented as a function of polymerization degree (n) in MEO_n, comonomeric salt concentration (O/Li), and crosslinking degree. The crosslinked copolymer P (0.7 MEO_(14)-0.3DMEO_(14)-SHMLi) without other small molecular additives exhibits an optimum Li~+-ionic conductivity of 1.2×10~(-6) S/cm at 25℃. Dc polarization test in the cell composed of Li/copolymer/Li shows a constant dc ionic conductivity which closes gradually to the ac one with decreasing dc polarization potential.     

The influence of cetyltrimethyl ammonium bromide on electrochemical properties of thyroxine reduction at carbon nanotubes modified electrode

The effect of cetyltrimethyl ammonium bromide (CTAB) on the electrochemical behaviors of thyroxine at a glassy carbon electrode (GCE) modified with single-walled carbon nanotubes (SWNTs) was investigated. At the SWNTs film-coated GCE, a well-defined oxidation peak of thyroxine at 0.78 V was obtained, but the reduction peak of thyroxine was indiscernible. When trace CTAB was added to the working solution, the reduction current could be greatly enhanced and the oxidation current remained stable. The reaction mechanisms for the reduction of thyroxine were explored by chronocoulometry. Thyroxine might form particular ion complex with CTAB via the interaction between iodine atoms on thyroxine and bromide ions in CTAB, which made the concentration of thyroxine at the surface of the modified electrode increased and the electron transfer rate enhanced. The proper mechanisms for the enhanced reduction of thyroxine in the present of CTAB were explored by several electrochemical techniques including cycle voltammetry linear sweep voltammetry and others. It was concluded that the special interactions between the thyroxine CTAB and SWNTs resulted in the increase of the reduction peak current. All results indicated that two iodine atoms on the thyroxine and four electrons were involved the reduction process which was irreversible and two iodine ions produced. In this system, the sensitive reduction peak of thyroxine at 0.3 V was employed to determine thyroxine and a low detection limit of 2x10(-8) mol/L was obtained for 2 min accumulation at 0.9 V. The SWNTs coated GCE had good stability and reproducibility.     

Voltammetric Determination of Trace Amounts of Fenitrothion on a Novel Nano-TiO2 Polymer Film Electrode

A novel nano-TiO₂ polymer modified glassy carbon (GC) electrode was developed for the determination of an organophosphorous pesticide, fenitrothion (-NO₂), in citrate buffer solution. The electrochemical behavior of fenitrothion was characterized by using cyclic voltammetry. An irreversible form, -NO₂, was transformed into a reversible redox couple (-NHOH/-NO), and it can be used to determine trace fenitrothion by square wave voltammetry. The experimental parameters, such as film thickness, pH value, accumulation potential and time were optimized. Interestingly, a cyclic voltammetric scan was observed to be more effective than a constant potential for the accumulation of fenitrothion. A linear response over a fenitrothion concentration of 2.5×10^–8 to 1.0×10^–5M was exhibited, with a detection limit of 1.0×10^–8M (S/N=3). The high sensitivity and selectivity of this film electrode was demonstrated by its practical application to the determination of trace amounts of fenitrothion in lake water and apple samples.     

A multiwall carbon nanotubes film-modified carbon fiber ultramicroelectrode for the determination of nitric oxide radical in liver mitochondria

A novel chemically modified electrode based on the multiwall carbon nanotubes (MWNTs) film-coated carbon fiber ultramicroelectrode (CFUE) has been described for the determination of nitric oxide radical (.NO). The electrochemical behaviors of MWNTs-modified CFUE have been characterized in 0.2 mmol L(-1) K(4)Fe(CN)(6) and 0.1 mol L(-1) KCl solution. The Nafion film was used to avoid some electroactive interferences. The amount of Nafion was optimized, and some possible interferents [such as nitrite (NO(2)(-)), nitrate (NO(3)(-)), ascorbate, dopamine (DA), l-arginine (l-Arg), etc.] were tested and evaluated. The oxidation peak current of .NO increases significantly at the MWNT/Nafion-modified CFUE, in contrast to that at the bare and the Nafion-modified CFUE, and the oxidation peak potential is at 0.78 V (vs. SCE), which can be used for the detection of .NO. The oxidation peak current is linearly with the concentration of .NO from 2x10(-7) to 8.6x10(-5) mol L(-1), and the detection limit is 2x10(-8) mol L(-1). The liver mitochondria in Carassius auratus were isolated and .NO release from mitochondria was monitored by using this ultramicroelectrode system.     

Electrochemical characterization of cationic surfactants’ adsorption on a disturbed n-alkanethiolate self-assembled monolayer-modified polycrystalline gold electrode

The adsorption of cetyltrimethylammonium bromide (CTAB) on disturbed n-alkanethiolate self-assembled monolayers (SAMs) was investigated by electrochemical methods with potassium ferricyanide [K₃Fe(CN)₆] as a probe. Compared with the completely restrained signal at ordinary compact n-alkanethiolate SAMs, the electrochemical response of K₃Fe(CN)₆ at the disturbed n-alkanethiolate SAMs was partly restored and became progressively reversible in the presence of increasing concentrations of CTAB, which was employed to characterize the adsorption of cationic surfactants on hydrophobic SAMs. The effect of CTAB concentration on electrochemical impedance spectroscopy (EIS) plots indicated that CTAB experienced two different types of adsorptive behavior at the disturbed n-alkanethiolate SAMs: monomer adsorption at low concentrations below 1×10^–6 M and monolayer adsorption at CTAB concentrations above 1×10^–5 M. The adsorption of a series of cationic surfactants with similar structures to CTAB on disturbed n-alkanethiolate SAMs was also explored. These surfactants had similar adsorptive behavior and showed nearly linear adsorption characteristics with the length of their hydrophobic tails.     

The amperometric determination of indole-3-acetic acid based on CeCl<Subscript>3</Subscript>-DHP film modified gold electrode

An amperometric sensor for the determination of indole-3-acetic acid (IAA) based on the CeCl₃-DHP film modified gold electrode was developed. CeCl₃ was dissolved into water in the presence of dihexadecyl hydrogen phosphate (DHP). The IAA sensor was prepared via evaporating solvent of the CeCl₃-DHP dispersion on the gold electrode surface. The amperometric response of IAA on the CeCl₃-DHP film modified gold electrode was investigated. The experimental results indicate that the passivation of the electrode due to the adsorption of the oxidation product of IAA decreases significantly at the CeCl₃-DHP film modified gold electrode, in contrast to that at the bare and the DHP modified gold electrode. The experimental parameters were optimized and an electrochemical method for the determination of IAA was established. The oxidation peak current is linearly with the concentration of IAA from 1 × 10⁻⁷ to 2 × 10⁻⁵ mol l⁻¹ and the detection limit is 3 × 10⁻⁸ mol l⁻¹. The relative standard deviation of eight measurements is 3.2% for 5 × 10⁻⁷ mol l⁻¹ IAA. The IAA in plant leaves were extracted and determined by the IAA sensor.