Coulometric determination of uranium and iron or plutonium in a single aliquot using platinum working electrode

A controlled potential coulometric method developed earlier for the determination of uranium in the presence of iron or plutonium using platinum working electrode was extended for individual determination of uranium and iron or plutonium in single aliquot. After uranium determination, Fe(III) or Pu(IV) in the aliquot is reduced electrolytically to Fe(II) or Pu(III) and subsequently determined by electrolytic oxidation to Fe(III) or Pu(IV), respectively. Analysis of synthetic solutions indicated that the values for uranium, iron and plutonium obtained by this method are reproducible within±0.2% and are in good agreement with values obtained using conventional redox methods 1, 2.     

Kinetics of Pu(IV) sorption by smectite-rich natural clay

Kinetics of sorption of Pu(IV) by smectite-rich clay has been studied at varying metal ion concentrations. Different concentrations were achieved using different isotopes of Pu, namely, ²³⁹Pu, ²³⁸Pu and ²³⁷Pu. ²³⁷Pu was produced by alpha induced reaction on ²³⁵U, followed by radiochemical separation of Pu from irradiated U₃O₈ target. The concentrations used are above and below the solubility of Pu(IV) under neutral pH conditions, thereby, indicating the mechanism of sorption reactions of Pu(IV) in typical laboratory experiments and field level observations. Kinetics of Pu(IV) at 10^?13 M concentration was found to be fast whereas at higher metal concentration the rate is governed by a slow step, indicating the role of formation of Pu(IV) polymeric species at the sorbent surface.     

Studies on purification of plutonium from silver ions

Precipitation and solvent extraction methods have been investigated for the purification of plutonium from silver from the solution generated during oxidative dissolution of plutonium oxide using Ag(II) ions. Initial experiments have been carried out using thorium as representative of plutonium. Selecting the optimum conditions, the experiments were repeated with plutonium. The results revealed that Pu can be purified from silver ions either by precipitating silver as silver chloride or silver metal followed by Pu(IV) oxalate precipitation or by selective extraction of Pu(IV) into 20% Aliquat-336 or 30% TBP.     

Controlled-potential coulometric studies on fluoride and sulphate complexes of neptunium (VI)

Fluoride and sulphate complexing of Np(VI) has been studied by controlled-potential coulometry at a constant ionic strength. The values of ₁ ^* and ₂ ^* for fluoride complexes were found to be 9.4 and 8.9, respectively, at an ionic strength =0.5. At an ionic strength =1.0, ₁ ^* and ₂ ^* obtained were 6.6 and 10.5, respectively. Sulphate complexing of Np(VI) was studied only at an ionic strength =0.5. The value of ₁ ^* obtained was 5.6.     

Determination of hexavalent plutonium using differential spectrophotometry

A differential spectrophotometric method has been developed for plutonium in hexavalent state using a double beam spectrophotometer. The absorbance measurements were made at 835 nm in 4M sulfuric acid using a 5 cm cell. In the method developed the absorbance of six Pu(VI) standards, taken in the sample cell, were recorded against a molybdenum blue solution of appropriate intensity in the reference cell. A least-squares fit of data on absorbance and concentration of plutonium standards gave slope F and intercept Co which were used to determine the unknown concentrations using the relationship, C=C₀+F·Ar where Ar is the absorbance of a plutonium solution of unknown concentration C mg/g. Various parameters like choice of acid and acidity, slit width, oxidant etc. were studied and the conditions optimized. Plutonium in the concentration range of 0.1–0.3 mg/g could be determined with a precision of ±0.5%. Uranium does not interfere. The method is useful for the analysis of a large number of samples on a routine basis.     

A Short Convergent Synthesis of (±) Patulolide A

A short, convergent synthesis of (±) patulolide A, a 12-membered macrolide with high antifungal activities is hereby reported. It has been achieved in 10 steps from 1-bromopentanal and 4-hydroxypent-1-yne.     

Sorption of plutonium from low level liquid waste using nano MnO2

Nano-crystalline MnO₂ has been synthesized by the method of alcoholic hydrolysis of KMnO₄ and its potential as a sorbent for plutonium present in the low level liquid waste (LLW) solutions was investigated. The kinetic studies on the sorption of Pu by MnO₂ reveal the attainment of equilibrium sorption in 15 h, however 90 % of sorption could be achieved within an hour. In the studies on optimization of the solution conditions for sorption, it was observed that the sorption increases with the pH of the aqueous solution, attains the maximum value of 100 % at pH = 3 and remains constant thereafter. The sorption was found to be nearly independent of the ionic strength (0.01–1.0 M) of the aqueous solutions maintained using NaClO₄, indicating the inner sphere complexation between the Pu⁴⁺ ions and the surface sites on MnO₂. Interference studies with different fission products, viz., Cs⁺, Sr²⁺ and Nd³⁺, revealed decrease in the percentage sorption with increasing pH of the suspension indicating the competition between the metal ions. However, at the metal ion concentrations prevalent in the low level liquid waste solutions, the decrease in the Pu sorption was only marginally decreased to 90 % at pH = 3, the decrease being more in the case of Nd³⁺ than that in the case of Cs⁺. This study, therefore, shows nano-crystalline MnO₂ can be used as a sorbent for separation of Pu from LLW solutions.     

Sorption of Eu(III) by amorphous titania, anatase and rutile

Sorption of Eu(III), an analogue of trivalent actinides (Am, Cm), by amorphous titania as well as different crystalline phases of titania, namely anatase and rutile, have been studied as a function of pH, using ¹⁵⁴Eu (half life?=?8.8 yrs, E_???=?123,247?keV) as a radiotracer. The objective of this study was to investigate the effect of the crystalline phase of the titania on their sorption behaviour towards the metal ion. Amorphous titania was prepared by organic route and was converted into anatase and rutile by heating at elevated temperatures based on the differential thermal analysis studies. Eu(III) sorption by all forms of titania rises sharply with the pH of the suspension, with the sorption edge shifting to higher value in the order; amorphous?<?anatase?<?rutile. However, the normalization of the sorption data to the surface area of the sorbents resulted in the overlapping of the sorption curves for amorphous and anatase phases, with the data being higher for rutle in the lower pH region, indicating the effect of the crystal phase on sorption behaviour of Eu(III).     

Asymmetric Reduction of Aromatic Ketones and Asymmetric Hydroboration of 2-Phenyl-1-Alkenes with the Reagent Prepared from Borane-Methyl Sulfide and (15,25)-(+)-2-Amino-3-Methoxy-1-Phenyl-1-Propanol

Asymmetric reduction of aromatic ketones, with the reagent (1) prepared from borane-methyl sulfide (EMS) and (15, 25)-(+)-2-amino-3-methoxy-1-phenyl-1-propanol (3a) yielded the corresponding alcohols in 30–65% e.e. This reagent (1) is also effective for the asymmetric hydroboration of 2-phenyl-1-alkenes, isoelectronically similar to the aromatic ketones, and yielded the corresponding alcohols in 8–37% e.e.     

Synthesis and in Vitro Antimicrobial Activity of 3-Aryl-4-S-benzyl-6-phenylimino-2-hepta-O-acetyl-β-D-lactosylimino-2,3-dihydro-1,3,5-thiadiazine (Hydrochloride)

The present work includes synthesis of several 3-aryl-4-S-benzyl-6-phenylimino-2-hepta-O-acetyl-β-D-lactosylimino-2,3-dihydro-1,3,5-thiadiazines (hydrochloride) by the interaction of N-hepta-O-acetyl-β-D-lactosyl isocyanodichloride and 1-aryl-5-phenyl-2-S-benzyl-2,4-isodithiobiurets. All these products have been characterized through the usual chemical transformations and infrared, ¹H NMR, and mass spectral analysis. The compounds were also screened for their antimicrobial activities.