Symphony of kinetics and statistical design approaches for response analysis during tray drying of Lagenaria siceraria leaves

Journal of Thermal Analysis and Calorimetry - Drying characteristics of horticultural produce often target studies on the process parameters so as to derive useful data for the development of...     

Effect of tri-n-butyl phosphate on physical properties of dodecane–nitric acid system

Extraction power of solvent depends upon the physical properties of the system. Tri-n-butyl phosphate (TBP) in dodecane is a versatile solvent used in the nuclear fuel reprocessing like PUREX process. The study of physical properties like density, viscosity, interfacial tension and solubility for TBP–nitric acid–dodecane system will be helpful in carrying out different extraction studies during PUREX process. Thus, physical properties like density, viscosity, interfacial tension and solubility have been measured for TBP–nitric acid–dodecane system using pycnometer, viscometer, pendant drop method and high performance liquid chromatography respectively. It has been observed that density and viscosity increases but interfacial tension and solubility decreases with the concentration of TBP in dodecane–nitric acid system. Physical properties of 30 % TBP–nitric acid–dodecane system have also been studied in detail. All these studies will also be useful in stripping out dissolved TBP from the nuclear waste.     

Amphiphilic liquid‐crystalline 4‐miktoarm star copolymers with a siloxane junction leading to cylindrically nanostructured templates for a siloxane‐based nanodot array

Well‐defined A₃B‐, A₂B₂‐, and AB₃‐type 4‐miktoarm star copolymers (M_n = 10,500–16,200, M_w/M_n = 1.16–1.18) consisting of poly(ethylene oxide) (PEO) and polymethacrylate bearing an azobenzene mesogen (PMA(Az)) as the arms and cyclotetrasiloxane as the core unit were synthesized using a combined route composed of a thiol‐ene click reaction and atom transfer radical polymerization. Microphase‐separated structures of the star copolymers in thin films with a thickness of approximately 100 nm were investigated by GISAXS and TEM. The A₃B‐type star‐(PEO)₃[PMA(Az)]₁ copolymer formed a more highly ordered PEO cylinder array with perpendicular alignment in the PMA(Az) matrix than that of the corresponding linear‐type block copolymer. The center‐to‐center distance of the PEO cylinders and the cylinder diameter were 13 and 4 nm, respectively. The highly ordered star‐(PEO)₃[PMA(Az)]₁ thin film was directly transferred to a siloxane‐based nanodot array by oxygen reactive ion etching. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1175–1188     

Adaptive optics wide-field microscopy using direct wavefront sensing

We report a technique for measuring and correcting the wavefront aberrations introduced by a biological sample using a Shack-Hartmann wavefront sensor, a fluorescent reference source, and a deformable mirror. The reference source and sample fluorescence are at different wavelengths to separate wavefront measurement and sample imaging. The measurement and correction at one wavelength improves the resolving power at a different wavelength, enabling the structure of the sample to be resolved.     

Class number one problem for the real quadratic fields $${{\mathbb {Q}({\sqrt{m^2+2r}})}}$$ Q ( m 2 + 2 r )

Archiv der Mathematik - We investigate the class number one problem for a parametric family of real quadratic fields of the form $$\mathbb {Q}( \sqrt{m^2+4r})$$ for certain positive integers m and r.     

Synchronization in the single-manufacturer multi-buyer integrated inventory supply chain

Considerable attention has previously been given to the single-vendor single-buyer integrated inventory problem, but there has been very little work on the integrated single-vendor multi-buyer case. Although the Joint Replenishment Problem applies in that case, it has not dealt with delivering a single product to multiple buyers when the set-up and inventory costs to the vendor are included. Assuming a close relationship between a manufacturer and buyers for a costless way of benefit sharing, three models are developed, two of which transfer with equal batches (part of a lot) and the third with unequal batches of the product. Optimal solution techniques are presented, a sensitivity analysis of the techniques is carried out, and several numerical problems are solved to support the analytical findings. A comparative study of the results shows that the supply by unequal batches performs better. This study also highlights the limitation of methods used in obtaining the least minimal total cost in the single-vendor single-buyer scenario, and the benefit of an integrated inventory is also discussed.