Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

A kinetic investigation of removal of chromium from aqueous solutions with a strong cation exchange resin

A kinetic investigation was performed with an ion exchange resin for chromium. A strong cation exchange resin (Amberlite IR 120) was used for removal of chromium. The effects of concentration, resin amount, and stirring speed on kinetics were investigated. The metal concentration range studied was between 5 to 160 mg/dm³ (the amount of solution was 4 dm³), the resin amount range was between 5 to 20 mg, and the stirring speed range was between 1000 to 3500 rpm. Equilibrium experiments were performed for calculation of separation factor. Kinetic studies were done using a Kressman-Kitchener stirrer reactor system and the results were compared with existing kinetic models. Two models, Nernst-Plank film diffusion control model (fdc) and solid phase diffusion control model (pdc), respectively were identified, and the dependence of the rate on parameters such as solution concentration, resin amount, stirring speed, etc. was examined for each of them. The interpretation of these data shows that the system is probably controlled by both film and particle diffusion. Correspondence: Sevgi Kocaoba, Department of Chemistry, Faculty of Art and Science, Yildiz Technical University, Davutpasa Cad. No: 127, 34210 Davutpasa-Istanbul, Turkey.     

Highly sensitive spectrophotometric methods for the determination, validation and thermogravimetric analysis of antiulcer drugs, nizatidine and ranitidine in pure and pharmaceutical preparations

Two sensitive, simple and rapid UV and second order derivative spectrophotometric methods were developed for the determination of nizatidine and ranitidine hydrochloride in pure form and pharmaceutical preparations. For the first method, UV spectrophotometic method, nizatidine was determined at 325 nm and ranitidine at 325.5 nm with detection limits of 0.07 and 0.04 μg/mL, respectively. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 328/356.5 nm for nizatidine and 326/357 nm for ranitidine were measured in the second order derivative-spectra. The detection limits were found to be 0.02 μg/mL for nizatidine and 0.016 μg/mL for ranitidine, respectively. The thermal analysis of the two drugs was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy changes were obtained 121.9 and 124.15 J/g for nizatidine and ranitidine, respectively. The proposed method was successfully applied to the analysis of pharmaceutical preparations. The results were in good agreement with those obtained using the reference method; no significant difference were found in the accuracy and precision as revealed by the accepted values of t- and F-tests.     

Spectrofluorimetric Determination and Validation of Biotin in Pure and Dosage Form via Derivatization with 4-Fluoro-7-nitrobenzofurazan

A simple and highly sensitive spectrofluorimetric method was developed for the determination of biotin in pure and dosage form. The method is based on the derivatization of biotin with 4‐fluoro‐7‐nitrobenzofurazan in borate buffer of pH 9.0 to yield a yellow, fluorescent product. The various chemical conditions that affected the reaction were studied. The method was validated for specificity, linearity, precision, accuracy, recovery and robustness. At optimized experimental conditions, a linear relationship between the fluorescence intensity of the concentration of biotin is observed in the range 45–450 ng/mL. Limit of detection and quantification were 0.038 and 0.114 ng/mL, respectively. The percentage mean recovery was 99.96. The proposed procedure was successfully applied to the determination of biotin in its dosage form with mean recovery of 101.23±1.22 for biotin tablets. The results obtained were in good agreement with those obtained by the reference method.     

Determination of Ciprofloxacin in Human Plasma and Urine by Precolumn Derivatization High Performance Liquid Chromatography with Fluorescence Detection

A sensitive, simple and selective high‐performance liquid chromatographic (HPLC) method was developed for the determination of ciprofloxacin in biological fluids. The method is based on the reaction between the drug and 4‐chloro‐7‐nitrobenzofurazan (NBD‐Cl) in borate buffer of pH 9.0 to yield a highly fluorescent derivative that is measured at 535 nm after excitation at 464 nm. The calibration curves were linear over the concentration ranges of 25–3000 and 50–3000 ng·mL^?1 for plasma and urine, respectively. The mean recovery of ciprofloxacin from plasma and urine was 98.37% and 98.40%, respectively. The method was found to be sensitive, precise, accurate, and reproducible. All of the validation parameters were within the acceptance range.     

2-Morpholinoethyl-substituted <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbene (NHC) precursors and their silver(I)NHC complexes: synthesis,crystal structure and in vitro anticancer properties

In this study, a series of unsymmetrically 2-morpholinoethyl-substituted benzimidazolium salts and their Ag(I)NHC complexes were synthesized. The 1,3-dialkylbenzimidazolium salts (1a–d) were synthesized in dimethylformamide at 80 °C temperature from the N-(2-morpholinoethyl)benzimidazole and alkyl halides. The Ag(I)NHC complexes (2a–d) were synthesized in dichloromethane at room temperature from the benzimidazolium salts and Ag₂O. All compounds were characterized by spectroscopic techniques (NMR and FT-IR) and elemental analyses. Also, the salt 1c and complex 2c were characterized by single-crystal X-ray crystallography. Anticancer activities of 2-morpholinoethyl-substituted benzimidazolium salts and Ag(I)NHC complexes were investigated against the MCF-7 breast cancer cell line, and the IC₃₀ and IC₅₀ values of these compounds were found to be in the range of 241–490 and 6–14 µM, respectively.     

A Study of Adsorption of Water Vapour on Wool under Static and Dynamic Conditions

Adsorption of water vapour on wool provides not only textile comfort, but also convenience in transportation due to increase in its bulk density. The adsorption and desorption isotherms of water vapour for wool were determined by both volumetric technique using a Coulter Omnisorp 100CX instrument and gravimetric method employing a Cahn 2000 electronic microbalance. Adsorption isotherm fitting to B.E.T. model and hysteresis on desorption was observed. The average effective diffusion coefficient of water in wool was found to be 8.4 × 10^-14 m²s^-1 at 25°C from gravimetric data. The effects of packing height and air velocity on the breakthrough curves were also investigated in the wool packed columns. For pseudo first order model, k values changing between 0.33 × 10^-6 – 69 × 10^-6 s^-1 was obtained for 2.2–6.4 cm s^-1 air velocity and 0.05–0.20 m packing height ranges.     

Structural and vibrational investigation of 1, 2-<Emphasis Type="Italic">bis</Emphasis>(3, 4-dimethoxyphenyl) ethane-1, 2-dione (Veratril): experimental and theoretical studies

The molecular and crystal structures of 1,2-bis(3,4-dimethoxyphenyl)ethane-1,2-dione (TMBZ = tetramethoxybenzil) were determined by a single-crystal X-ray diffraction, ¹H NMR, and FT-IR spectroscopy. The compound TMBZ (C₁₈H₁₈O₆, M _r = 330.32) crystallized in the orthorhombic Fdd2 space group wherein: a = 39.145(4), b = 18.167(2), c = 4.3139(5) Å and β = 90°, Z = 8. The packing of the molecules in the crystal lattice is stabilized by intermolecular C–H?O contacts in the herringbone arrangement. The molecular geometry and harmonic frequencies of TMBZ in the ground state were calculated utilizing density functional (B3LYP) method with the 6-311++G(d, p)-basis set. The density functional theory optimized the geometric structure, and vibrational wave numbers of TMBZ in gas phase were compared with the experimental data. A complete assignment of the fundamentals was proposed based on the total energy distribution calculation.     

LC Method with Precolumn Derivatization for Analysis of Mexiletine in Pharmaceutical Preparations

A isocratic, selective and accurate LC method of analysis of mexiletine in pharmaceutical preparations has been developed and validated. The method is based on derivatization of mexiletine with 4-chloro-7-nitrobenzofurazan in pH 9.0 borate buffer to yield a yellow product. Chromatography was performed on a C₁₈ column (150 × 4.6 mm i.d.) with acetonitrile–water 80:20 (v/v) as mobile phase at a flow rate of 1.0 mL min^?1. UV–visible absorbance detection was performed at 458 nm. The retention time of the mexiletine derivative was 4.10 min, and response was a linear function of concentration in the range 0.5–4.0 μg mL^?1 (r = 0.9998). The limits of detection and quantification were 0.05 and 0.15 μg mL^?1, respectively. Method validation revealed precision, sensitivity, and robustness were acceptable. Low RSD values are indicative of high precision, and high recovery values are indicative of the accuracy of the method. Results obtained by use of the proposed method for analysis of the mexiletine content of pharmaceutical a preparation were compared with those obtained by use of the official method. The method has been used for analysis of pharmaceutical preparations.