A cleaner and simple spectrophotometric micro-fluidic procedure for copper determination using nitroso-R salt as chromogenic agent

A cleaner and simple spectrophotometric method using microflow analysis (muFA) was performed. It consisted of a T-junction with microcoil on a polymethyl methacrylate (PMMA) chip which was fabricated by laser ablation and a molded polydimethylsiloxane (PDMS) as top plate. The fabricated PMMA chip was integrated with light emitting diode (LED) as light source and spectrometer as detector. The proposed device was applied to determining copper in water samples using nitroso-R salt as chromogenic reagent at 495nm. It was found that the proposed muFA system was with less reagents and samples consumption with tiny waste generation. The relative standard deviation (R.S.D.) was less than 2% (n=11) with the percentage recovery of 98.0+/-1.7% (n=7). The linear range for determination of copper in water samples was over the range of 0.05-3.0mugmL(-1) with a correlation coefficient (r(2)) of 0.999. The limit of detection (3sigma) was 47ngmL(-1) with a sample throughput of 30h(-1).     

Silica-supported ceric ammonium nitrate catalyzed chemoselective formylation of indoles

Selective formylation of free (N–H) indoles at C3 can be achieved by using formylating species generated from hexamethylenetetramine (HMTA) and silica-supported ceric ammonium nitrate (CAN–SiO₂). The use of a catalytic amount of this solid-supported reagent was found to be compatible with a range of substituents on the indoles and generated the corresponding products with good yields. A plausible mechanism for the formylation involving an electron transfer process is discussed.     

A simple and green analytical method for determination of iron based on micro flow analysis

A simple, inexpensive and reagent-less colorimetric micro flow analysis (μFA) system was implemented in a polymethyl methacrylate (PMMA) micro fluidic manifold. A T-shaped micro channel on a PMMA chip was fabricated by laser ablation and topped with molded polydimethylsiloxane (PDMS). The fabricated μFA system was integrated with the optical components as detector and applied to the determination of iron in water samples. It is based on the measurement of Fe(III)-nitroso-R salt complex at 720 nm formed by the reaction between Fe(III) and nitroso-R salt in an acetate buffer solution pH 5. The proposed μFA consumed very small amount of reagent and sample, it released waste of less than 2.0 mL h⁻¹. The relative standard deviation (R.S.D.) was less than 2% (n = 11) with the recovery of 98.7 ± 0.12 (n = 5). The linear range for the determination of iron in water samples was over the range of 0.05-4.0 μg mL⁻¹ with a correlation coefficient (r²) of 0.9994. The limit of detection (3σ) and limit of quantitation (10σ) were 0.021 μg mL⁻¹ and 0.081 μg mL⁻¹, respectively with a sample throughput of 40 h⁻¹.