Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

New shape functions for non-uniform curved Timoshenko beams with arbitrarily varying curvature using basic displacement functions

Basic Displacement Functions (BDFs) are introduced and derived using the basic principles of structural mechanics. BDFs are then utilized to obtain new shape functions for arbitrarily curved non-uniform beams, including the effects of shear deformation and extensibility of neutral axis. The main virtue of the proposed shape functions is their susceptibility to the variations in cross-sectional area, moment of inertia, and curvature along the axis of the beam element. Competence of the present method in static and free vibration analyses, as well as its applicability to the special case of straight Timoshenko beam has been verified through several numerical examples.     

Application of Solid-Phase Extraction Coupled with Dispersive Liquid–Liquid Microextraction for the Determination of Benzaldehyde in Injectable Formulation Solutions

Solid-phase extraction followed by dispersive liquid–liquid microextraction (SPE-DLLME) technique has been developed as a new analytical approach for extracting, cleaning up and preconcentrating benzaldehyde, a toxic oxidation product of the widely used preservative and co-solvent benzyl alcohol, in injectable formulation solutions. SPE of benzaldehyde from samples was carried out using C₁₈ sorbent. After the elution of benzaldehyde from the sorbent by using acetonitrile, DLLME technique was performed on the obtained solution. Benzaldehyde was preconcentrated by using DLLME technique. Thus, 1.5 mL acetonitrile extract (disperser solvent) and 55.0 µL 1,2-dichloroethane (extraction solvent) were added to 5 mL ultra pure water and a DLLME technique was applied. Several variables that govern the proposed technique were studied and optimized. Under optimum conditions, the method detection limit (LOD) of benzaldehyde calculated as three times the signal-to-noise ratio (S/N) was 0.08 µg L^?1. The relative standard deviation (RSD) for four replicates was 5.8 %. The calibration graph was linear within the concentration range of 0.5–500 µg L^?1 for benzaldehyde. The proposed method has been successfully applied to the analysis of the benzaldehyde in injectable formulation solutions (diclofenac, vitamin B-complex and voltaren) and the relative recoveries were between 88 and 92 % and show that matrix has a negligible effect on the performance of the proposed method.     

Accelerating role of clay in photo-oxidation of polypropylene/clay multifilament yarns

Photo-oxidative degradation of polypropylene/clay multifilament yarns containing different amounts of clay was investigated. These samples and pure polypropylene(PP) multifilametns were exposed to long wavelength radiations(λ 300 nm) under atmospheric condition of constant temperature and relative humidity. The photo-oxidative stability was studied using FTIR spectroscopy, tensile testing and microscopy. The results indicate that the addition of clay particles decreases the stability of PP/clay composites to photo-oxidative degradation according to comparison with pure PP. From FTIR study and tensile properties, it was also found that the multifilaments with higher clay loading reveals a faster loss of mechanical properties, higher photo-oxidative product formation and more reduction in the induction time of photooxidation. Moreover, the crack formation on surface of irradiated filaments corresponds well to the conclusions in tensile properties and FTIR characterization.     

The effect of electrospinning parameters on the compliance behavior of electrospun polyurethane tube for artificial common bile duct

The present research introduced a method to produce an artificial common bile duct using electrospinning technique. Also, the effect of electrospinning variables on the mechanical properties of produced prostheses is investigated. Using electrospinning of polyurethane nanofibres, cylindrical prostheses were produced on a rotating mandrel considering the different controllable factors such as the mandrel rotational speed, the applied voltage, and the flow rate of polymer solution. Taguchi method was used to investigate the effect of mentioned factors on the compliance of circular prostheses. MTT assay was performed to study the cytotoxicity of prostheses. The results of the signal-to-noise analysis showed that the mandrel rotational speed factor has the strongest effect on the compliance values. The flow rate was the second factor and it was followed by electrospinning voltage. In addition, the optimum conditions to reach the highest compliance value were determined. The results of MTT assay indicated no cytotoxic effects of prostheses on the cells. The compliance of optimum prosthesis was found close to the compliance value of a native common bile duct.     

Simultaneous Determination of Deltamethrin and Permethrin in Water Samples Using Homogeneous Liquid–Liquid Microextraction via Flotation Assistance and GC-FID

A new method was developed for the simultaneous determination of deltamethrin and permethrin in water samples with homogeneous liquid–liquid microextraction via flotation assistance and gas chromatography–flame ionization detection. A special extraction cell was designed to facilitate collection of the low density solvent extracts. The sample solution was added into the extraction cell, which contained an appropriate mixture of n-hexane (as an extraction solvent) and acetone (as a homogeneous solvent). Air flotation allowed the extraction solvent to be collected from the top of the solution. Under the optimum conditions, good linearity was observed in the range of 1.0–200 μg L^?1 with a correlation coefficient (r ²) greater than 0.9980 for both of the analytes. The limits of detection were 0.2 and 0.3 μg L^?1 for deltamethrin and permethrin, respectively (S/N = 3). The developed method was successfully applied to determine the two pesticides in three different water samples.     

A composite polyaniline/graphene–coated polyamide6 nanofiber mat for electrochemical applications

In this study, polyamide6 (PA6) nanofiber mats were fabricated through the electrospinning process. The nanofibers were coated by polyaniline (PANI) using the in situ polymerization of aniline in the presence of graphene oxide. The composite of the PANI/graphene oxide–coated nanofiber mat was treated with hydrazine monohydrate to reduce graphene oxide to graphene, and this was followed by the reoxidation of PANI. Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), thermal gravimetric analysis (TGA), tensile strength tests, electrical conductivity measurements, cyclic voltammetry (CV), and charge/discharge measurements were conducted on the composite PA6/graphene nanofiber mats. It was found that the surface of the PA6 nanofibers was coated uniformly with the granular PANI and graphene oxide. Besides, the composite nanofibers showed good tensile and thermal properties. Their electrical conductivity and specific capacitance, when used as a separator in the cell, were 1.02 × 10^?4 S/cm and 423.28 F/g, respectively. Therefore, the composite PANI/reduced graphene oxide–coated PA6 nanofiber mats could be regarded as suitable candidates for application in energy storage devices.     

Nanofibrous Tubular Membrane for Blood Hemodialysis

As the most important components of a hemodialysis device, nanofibrous membranes enjoy high interconnected porosity and specific surface area as well as excellect permeability. In this study, a tubular nanofibrous membrane of polysulfone nanofibers was produced via electrospinning method to remove urea and creatinine from urine and blood serums of dialysis patients. Nanofibrous membranes were electrospun at a concentration of 11.5 wt% of polysulfone (PS) and dimethylformamide (DMF)/tetrahydrofuran (THF) with a ratio of 70/30. The effects of the rotational speed of collectors, electrospinning duration, and inner diameter of the tubular nanofibrous membrane on the urea and creatinine removal efficiency of the tubular membrane were investigated through the hemodialysis simulation experiments. It was found that the tubular membrane with an inner diameter of 3 mm elecrospun at shorter duration with lower collecting speed had the highest urea and creatinine removal efficiency. The hemodialysis simulation experiment showed that the urea and creatinine removal efficiency of the tubular membrane with a diameter of 3 mm were 90.4 and 100%, respectively. Also, three patients’ blood serums were tested with the nanofibrous membrane. The results showed that the creatinine and urea removal rates were 93.2 and 90.3%, respectively.