HPLC study of starch hydrolysis products obtained with α-amylase from bacillus amyloliquefaciens and bacillus licheniformis

Two bacterial α-amylases from new industrial strains were studied: α-amylase fromBacillus amyloliquefaciens CCM 3502 (Czechoslovak) and thermostable α-amylase fromBacillus licheniformis 44MB82 (Bulgarian). The thermostable enzyme hydrolyzed starch mainly to dextrins, and after 1 h, 30% of the products were oligosaccharides. TheB. amyloliquefaciens enzyme produced more maltooligosaccharides than the first enzyme (B. licheniformis). Within 1 h, up to 80% of the substrate were hydrolyzed, giving different spectrum of oligosaccharides in comparison with the thermostable one.     

Cyclic deformation of aluminium and its alloys

The formation of slip bands is the main mechanism of cyclic deformation in pure Al. Their density, orientation and heights in polycrystalline Al were investigated during cycling. Types, sizes and densities of precipitates are responsible for the mode of cyclic deformation in AlCu4 pure alloy. In technical Al alloys intermetallic phases have detrimental effects on deformation homogeneity and largely govern the fatigue mechanism of the material and especially microcrack initiation.     

160Tb nuclear orientation in yttrium single crystal

First experimental results of¹⁶⁰Tb nuclear orientation in yttrium single crystal matrix are described. The influence of external magnetic field in combination with the crystal field interaction is discussed.     

56,57,60CoFe NMR/ON,hyperfine anomalies and γ-factors of cobalt isotopes

The results of NMR/ON measurements on^56'57'60Co isotopes in iron are presented. To avoid the uncertainties caused by local demagnetizing field inhomogenities the measurements on two cobalt isotopes in one sample have been carried out. The values of nuclear-factor ratios ⁵⁷/ ⁶⁰ = 1.805 (20), ⁶⁰/ ⁵⁶ = 0.761 (20), ⁵⁶/ ⁵⁷ = 0.726 (20) and hyperfine anomalies⁵⁶⁶⁰ = -0.036 (10),^{60 57} = 0.017 (10) and⁵⁷⁵⁶ = 0.018 (10) have been calculated from the experimental results.     

Hyperfine anomalies and nuclear γ-factors of56Co,57Co and60Co isotopes studied by NMR/ON

The results of NMR/ON measurements on^56,57,60Co isotopes in iron are presented in the paper. To avoid the uncertainties caused by local demagnetizing field inhomogeneities the measurements on two cobalt isotopes in one sample have been carried out. The values of nuclear-factors ratios ⁵⁷/ ⁶⁰=1·805(20), ⁶⁰/ ⁵⁶ = 0·761(20), ⁵⁶/ ⁵⁷ = 0·726(20) and hyperfme anomalies^{56 60} = –0·036(10),^{60 57} = 0·017(10) and^{57 56} = 0·018(10) have been calculated from the experimental results.Dedicated to the 30th anniversary of the Joint Institute for Nuclear Research.     

Study of isotope exchange reactions by double labelling

This paper presents the method of double labelling in the study of the kinetics of homogeneous isotope exchange reactions. This method was tested by the determination of the Sn(II)−Sn(IV) exchange rate in hydrochloric acid medium. The system was labelled by the tracer^119mSn [initially in the Sn(IV) state]; when the isotope equilibrium was established, Sn(IV) was again labelled by tracer¹¹³Sn. The separation of Sn(II) and Sn(IV) in the given time of exchange was performed by the extraction of Sn(IV)-hydroxyquinolate into chloroform. The specific activities of the separated components were determined from the ratio of¹¹³Sn and^119mSn activities. The exchange rate was calculated from the time dependence of specific activities. The advantage and possibilities of the method of double labelling in the study of isotope exchange are discussed.     

The inhomogeneity of plastic deformation

Considerable local strain differences occur in single crystals as a consequence of slip bands. A significant contribution to this phenomenon is the effect of the deformation rate on the inhomogeneity of its distribution. In polycrystalline materials the plastic deformation is affected by grain boundaries and their vicinity as well as by various orientations of single grains in onephase metals and alloys, and by various component properties in multiphase materials. In some cases it has been possible to describe these phenomena by means of micromechanics. Valuable information has also been acquired by means of three-dimensional stereology.     

Photostabilizing activity of sterically hindered piperidines—II: Radical trapping ability

The abilities of both 2,2,6,6-tetramethylpiperidine (I) and its nitroxyl (II) to trap radicals involved in hydrocarbon photo-oxidations have been studied in cumene and 1,3,5-trimethylcyclohexane at 27° using AIBN, hydroperoxide and dialkylperoxide as initiators: the light was either the band 300–400 nm or 366 nm. Under conditions of photolysis of ROOH (degenerate branching), I is oxidized to II. II is capable of trapping R' radicals, the rate constant being ～50 times lower than that for RO^.₂ formation. RO^.₂ radicals react with neither I nor II. Under the condition of degenerate branching, II is capable of intercepting the radical fragments from decomposing hydroperoxide. The rate constant of this process is ～500 times higher than that for hydrogen abstraction by these fragments. A reaction mechanism is suggested: hydrogen bonded associates formed between an N-containing stabilizer and ROOH play a dominant role. The principal intermediates in this mechanism are represented by >NO^., >NOH and >NOR species.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.