Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Decontamination of radionuclides on construction materials

A wide variety of materials can become contaminated by radionuclides, either from a terrorist attack or an industrial or nuclear accident. The final disposition of these materials depends, in large part, on the effectiveness of decontamination measures. This study reports on investigations into the decontamination of a selection of building materials. The aim has been to find an effective, easy-to-use and inexpensive decontamination system for radionuclides of cesium and cobalt, considering both the chemical and physical nature of these potential contaminants. The basic method investigated was surface washing, due to its ease and simplicity. In the present study, a basic decontamination formulation was modified by adding isotope-specific sequestering agents, to enhance the removal of cesium(I) and cobalt(II) from such construction materials as concrete, marble, aluminum and painted steel. Spiking solutions contained ¹³⁴Cs or ⁶⁰Co, which were prepared by neutron activation in the SLOWPOKE-2 nuclear reactor facility at the Royal Military College of Canada. Gamma spectroscopy was used to determine the decontamination efficiency. The results showed that the addition of sequestering agents generally improved the radiological decontamination. Although the washing of both cesium and cobalt from non-porous materials, such as aluminum and painted steel, achieved a 90–95 % removal, the decontamination of concrete and marble was more challenging, due to the porous nature of the materials. Nevertheless, the removal efficiency from 6-year-old concrete increased from 10 % to approximately 50 % for cobalt(II), and from 18 to 55 % for cesium(I), with the use of isotope binding agents, as opposed to a simple water wash.     

Physical characterization of uranium oxide pellets and powder applied in the Nuclear Forensics International Technical Working Group Collaborative Materials Exercise 4

Journal of Radioanalytical and Nuclear Chemistry - Physical characterization is one of the most broad and important categories of techniques to apply in a nuclear forensic examination. Physical...     

Transfer measurements for the Ti+Ni systems at near barrier energies

Large enhancements have been observed in the sub-barrier fusion cross sections for Ti+Ni systems in our previous studies. Coupled channel calculations incorporating couplings to 2⁺ and 3⁻ states failed to explain these enhancements completely. A possibilty of transfer channels contributing to the residual enhancements had been suggested. In order to investigate the role of relevant transfer channels, measurements of one- and two-nucleon transfer were carried out for ^46,48Ti+⁶¹Ni systems. The present paper gives the results of these studies.     

The application of radiochronometry during the 4th collaborative materials exercise of the nuclear forensics international technical working group (ITWG)

Journal of Radioanalytical and Nuclear Chemistry - In a recent international exercise, 10 international nuclear forensics laboratories successfully performed radiochronometry on three low enriched...     

Dispersive power and crossover temperature,TCO, of two polar nematic liquid crystals in the visible spectral region

Refractive index studies are carried out on two highly polar liquid crystals: 1. N-(p-n-methoxy benzylidene)-p-amino benzonitrile, PmBAB, 2. N-(p-n-ethoxy benzylidene)-p-amino benzonitrile, PeBAB. The experimental investigations are carried out in the visible region at four different wavelengths, namely, 633, 589, 546 and 436 nm. The two compounds exhibit only the nematic liquid crystalline phase in between the isotropic and crystalline solid. The dispersive power ω is estimated for two consecutive wavelengths for the case of <n>, n_e and n_o for different wavelengths and found to be constant with temperature. Further the temperature gradients of n_e and n_o are estimated, and the crossover temperature is obtained using dn_o/dT for all the wavelengths.     

Steering in computational science: Mesoscale modelling and simulation

This paper outlines the benefits of computational steering for high performance computing applications. Lattice-Boltzmann mesoscale fluid simulations of binary and ternary amphiphilic fluids in two and three dimensions are used to illustrate the substantial improvements which computational steering offers in terms of resource efficiency and time to discover new physics. We discuss details of our current steering implementations and describe their future outlook with the advent of computational grids.     

An investigation into the use of ionizing radiation for the destruction of sulphur mustard

Chemical warfare agents have been stockpiled for almost a decade and their destruction has become an environmental issue that will continue to require attention for many years. There are hundreds of thousands of tonnes yet to be destroyed, and the current chemical or incineration techniques are not without problems. While many researchers are seeking better chemical techniques, we decided to try ionizing radiation to destroy sulphur mustard with the goal of producing non-toxic products. We irradiated a variety of sulphur mustard samples by both a mixed field source (β, γ and neutrons) and a pure gamma source. The mixed field irradiation of wet sulphur mustard for long irradiation times was the most successful at destroying the chemical agent.     

Pseudo-rotation mechanism for fast olefin exchange and substitution processes at orthometalated C,N-complexes of platinum(II)

Bridge splitting in chloroform of the orthometalated chloro-bridged complex [Pt(micro-Cl)(2-Me(2)NCH(2)C(6)H(4))](2)(1), with ethene, cyclooctene, allyl alcohol and phosphine according to 1+ 2L --> 2[PtCl(2-Me(2)NCH(2)C(6)H(4))(L)], where L = C(2)H(4)(3a), C(8)H(14), (3b), CH(2)CHCH(2)OH (3c), and PPh(3)(4a and 4b) gives monomeric species with L coordinated trans or cis to aryl. With olefins the thermodynamically stable isomer with L coordinated cis to aryl is formed directly without an observable intermediate. With phosphine and pyridine, the kinetically controlled trans-product isomerizes slowly to the more stable cis-isomer. Bridge splitting by olefins is slow and first-order in 1 and L, with largely negative DeltaS(++). Substitution of ethene cis to aryl by cyclooctene and allyl alcohol to form 3b and 3c, and substitution of cot from 3b by allyl alcohol to form 3c are first order in olefin and complex, ca. six orders of magnitude faster than bridge cleavage due to a large decrease in DeltaH(++), and with largely negative DeltaS(++). Cyclooctene exchange at 3b is first-order with respect to free cyclooctene and platinum complex. All experimental data for olefin substitution and exchange are compatible with a concerted substitution/isomerization process via a turnstile twist pseudo-rotation in a short-lived labile five-coordinated intermediate, involving initial attack on the labile coordination position trans to the sigma-bonded aryl. Bridge-cleavage reactions of the analogous bridged complexes occur similarly, but are much slower because of their ground-state stabilization and steric hindrance.