Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

Removal of Cyanide from Aqueous Solutions by Adsorption on Activated Carbon Prepared from Lignocellulosic By-products

Cyanide is considered one of the most dangerous compounds for the environment. They are discharged by various industries: chemical and metallurgical processes (extraction of gold and silver) and food industries. Adsorption is among the most used processes for elimination of cyanides particularly for the low concentrations. In this work, the cyanide removal is carried out by adsorption onto activated carbons prepared from olive stones and coffee ground. So we can promote this by-product as an inexpensive adsorbent. The prepared activated carbons are characterized by scanning electron micrograph and by determination of the physicochemical properties and specific surface area. All the adsorption experiments were performed in batch mode on synthetic water cyanide (KCN) at pH 10.8–11.0 to avoid volatilization of very toxic HCN. To describe the adsorption kinetics, the kinetic models of pseudo-first-order, pseudo-second-order, and intra-particle diffusion were applied. The experimental equilibrium data for adsorption of free cyanide were analyzed by the Langmuir, Freundlich, and Temkin isotherm models.     

Radical copolymerization of vinylidene cyanide with 2,2,2‐trifluoroethyl methacrylate: Structure and characterization

A novel copolymer of vinylidene cyanide (VCN) and 2,2,2‐trifluoroethyl methacrylate (MATRIF) was synthesized by bulk free radical process in a 52% yield from an equimolar comonomer feed. The copolymer's composition and microstructure were analyzed by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy, SEC, and elemental analysis. The reactivity ratios calculated from both the Q‐e Alfrey‐Price parameters and the Jenkins' Patterns Scheme indicate a tendency to alternation in the copolymerization, the latter method suggesting that MATRIF homopropagation be slightly favoured (r_V = r₁₂ = 0.1, r_M = r₂₁ = 0.3). The molar incorporation of VCN in the copolymer was only 42 mol % according to the 9.0 wt % nitrogen content determined by elemental analysis, in good agreement with the value obtained by ¹H‐NMR. High‐resolution ¹H and ¹³C‐NMR spectra were used to study the microstructure of the copolymer. As an example, the three well‐resolved carbonyl resonances in the ¹³C‐NMR spectrum were assigned to the MATRIF‐centered triads VMV, VMM, and MMM, respectively, (V and M stand for VCN and MATRIF, respectively). The presence of VCN dyads (e.g., in VVM and VVV sequences) was shown to be marginal or absent altogether. Thermogravimetric analysis of poly(VCN‐co‐MATRIF) copolymer showed good thermal stability, and its main pyrolytic degradation taking place only above 368 °C. A 4% weight loss at about 222 °C suggested the presence of a few VCN homodyads, possibly inducing thermal depolymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Long-range critical wetting: observation of a critical end point

Alkanes deposited on aqueous substrates exhibit two different types of wetting behavior: alternatively to the usual first-order wetting transition, a sequential-wetting scenario of a long-range critical wetting transition preceded by a first-order thin-thick transition may be observed. Here, we present the first successful experimental attempt to locate the transition point between the standard first-order wetting and the long-range critical wetting: a critical end point, observed in a mixture of pentane and hexane which is deposited on an aqueous solution of glucose. Furthermore, we present the first direct measurement of the contact angle in the intermediate wetting state (frustrated-complete wetting) in the sequential-wetting scenario of hexane on brine and compare to theoretical predictions.     

Isometries, Geodesics and Jacobi Fields of Lorentzian Heisenberg Group

The paper is mainly devoted to determine the groups of isometries of the Heisenberg group endowed with each of the three left invariant Lorentzian metrics which are possible on it; also, an explicit computation of all the isometries for the (two) non flat Lorentzian metrics is done. Moreover, explicit formulas for the geodesic curves and the Jacobi vector fields for each of these three Lorentzian metrics are computed.     

A look at surfactant partitioning in polymeric latexes using conductivity measurements

An attempt was made to analyse the partitioning of anionic surfactants in a mixed surfactant system using surface tension and conductivity measures. This last technique gives us access to the quantity of free ions in solution, and thus a measure of the amount of anionic surfactant available in the aqueous phase. The range of surfactant concentrations studied here is such that the global surface coverage (assuming that the totality of the emulsifier is at the particle surface) varies around 100%.     

Fluorinated comblike homopolymers: The effect of spacer lengths on surface properties

A series of polyacrylate monomers with F‐alkylalkyl [F(CF₂)_n(CH₂)_n′] side groups were prepared by free‐radical polymerization. The effect of the chemical structure on the surface properties of poly(ethylene terephthalate)s was evaluated by variations in the relative length of the fluorocarbon and hydrocarbon units in the side group. The resulting polymers were quite surface‐active in the solid state. The surface and bulk organization was investigated by X‐ray photoelectron spectroscopy analysis. A strong correlation between the bulk organization and surface properties of the polymers was established. The outmost layer, formed from trifluoromethyl groups and some ester functions, suggests that the side chain is arranged irregularly in the polymer–air interface. The length of the lateral chain governs this organization: long fluorinated chains and short hydrocarbon spacers are essential elements of the molecular design for such low‐surface‐energy materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3737–3747, 2005     

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO₂ reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO₂ to CH₄ in water. Stability and selectivity of conversion of CO₂ to CH₄ as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO₂ reduction reaction (CO₂RR) proceeds at −1.5 V vs. Ag/AgCl at ~10 mA/cm² current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO₂). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.