Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Conformation-dependent change in antitumor activity of linear and branched (1----3)-beta-D-glucans on the basis of conformational elucidation by carbon-13 nuclear magnetic resonance spectroscopy.

The antitumor activity of (1----3)-beta-D-glucans was tested in order to clarify its conformation-dependent response together with conformational elucidation by carbon-13 nuclear magnetic resonance (13C-NMR) spectroscopy. It was shown that the following three conformations, single chain, single helix and triple helix, are readily distinguished by the high-resolution solid-state 13C-NMR method. It turned out that preparations of linear (1----3)-beta-D-glucans of a triple helical conformation were ineffective in the inhibition of tumor growth. These linear (1----3)-beta-D-glucans were converted to an effective form in the inhibition of tumor growth when they were lyophilized from dimethyl sulfoxide (DMSO) solutions as a result of a conformational change from the triple helical to the single chain forms. They were not effective, however, when assayed in DMSO solution. In contrast, it was found that a branched (1----3)-beta-D-glucan is effective not only in either saline solutions of the triple helical sample or the lyophilized sample from DMSO, but also in DMSO solution. The aforementioned drastic change in antitumor activity was interpreted in terms of resulting conformational changes as analyzed by the 13C-NMR method.     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

Solvent effect on protein binding by polymer brush grafted onto porous membranes

An epoxy-group-containing polymer chain was grafted onto the hollow-fiber form of a porous polyethylene membrane by the immersion of the electron beam-irradiated trunk polymer in glycidyl methacrylate diluted with methanol and 1-butanol. The epoxy group density ranged from 8.5 to 13.4 mol per kg of the trunk polymer. Subsequently, the epoxy groups produced were converted into sulfonic acid and diethylamino groups. The density of -SOH and -N(C2H5), groups was 0.40 and 2.2 mol per kg of the product. respectively. The polymer brush, defined as a polymer chain extending from the surface of a pore toward the interior of the pore, was evaluated from the determination of an equilibrium binding capacity of hen egg lysozyme (HEL) and bovine serum albumin (BSA). The polymer brush prepared in 1-butanol was found to be longer than that prepared in methanol from the determinations of liquid permeability and protein adsorptivity. The proteins were bound to the polymer brush prepared in 1-butanol, followed by the functionalization, at higher degrees of multilayer binding: about 30 for HEL and 6 for BSA.     

Synthetic Access to New Pyridone Derivatives through the Alkylation Reactions of Hydroxypyridines with Epoxides

General methods for the preparation of a variety of pyridone and oxypyridine derivatives are described. 2‐,3‐,4‐Hydroxy pyridine and 2‐pyridinemethanol were alkylated with ethylene‐, propylene‐, and stryrene‐oxide and epichlorohydrin in the presence of different Lewis acids as a catalyst. The best yield of 3a was achieved in the presence of CdI₂/BF₃ · OEt₂. The corresponding pyridone derivatives (3a–d, 7a–d) were obtained from the reaction of 2‐and 4‐hydroxypyridine with oxiranes in good yields, whereas oxypyridine derivatives (5a–d, 9a,b) were obtained from reactions of 3‐hydroxypyridine and 2‐pyridinemethanol with oxiranes. Chlorohydrines (3d, 5d, 7d) were easily converted to corresponding epoxy derivatives (10, 11, 12) in basic medium; then amino alcohols (13–17) were obtained from the reaction of these epoxy derivatives with amines.     

A triphenylamine based multi-analyte chemosensor for Hg and Cu ions in MeCN/H2O

A novel triphenylamine based oxidative chemosensor TOC was synthesized. The chromogenic and fluorogenic behaviors of TOC towards Hg²⁺ and Cu²⁺ ions in a binary mixture of MeCN/H₂O (9/1) were dramatically different. TOC displays colorimetric ‘naked eye’ recognition of Hg²⁺ and fluorogenic ‘turn on’ response towards Cu²⁺ via a unique cyclization reaction using two different detection modes. Moreover, TOCAZOL obtained from the oxidative cyclization reaction of TOC with Cu(ClO₄)₂ can be used as a selective fluorescent sensor toward Hg²⁺ ion.     

Parallelizing Tabu Search on a Cluster of Heterogeneous Workstations

In this paper, we present the parallelization of tabu search on a network of workstations using PVM. Two parallelization strategies are integrated: functional decomposition strategy and multi-search threads strategy. In addition, domain decomposition strategy is implemented probabilistically. The performance of each strategy is observed and analyzed. The goal of parallelization is to speedup the search in finding better quality solutions. Observations support that both parallelization strategies are beneficial, with functional decomposition producing slightly better results. Experiments were conducted for the VLSI cell placement, an NP-hard problem, and the objective was to achieve the best possible solution in terms of interconnection length, timing performance (circuit speed), and area. The multiobjective nature of this problem is addressed using a fuzzy goal-based cost computation.     

Metachronal propulsion of non-Newtonian viscoelastic mucus in an axisymmetric tube with ciliated walls

Cilia-induced flow of viscoelastic mucus through an idealized two-dimensional model of the human trachea is presented.The cilia motion is simulated by a metachronal wave pattern which enables the mobilization of highly viscous mucus even at nonzero Reynolds numbers.The viscoelastic mucus is analyzed with the upper convected Maxwell viscoelastic formulation which features a relaxation time and accurately captures normal stress generation in shear flows.The governing equations are transformed from fixed to wave(laboratory)frame with appropriate variables and resulting differential equations are perturbed about wave number.The trachea is treated as an axisymmetric ciliated tube.Radial and axial distributions in axial velocity are calculated via the regular perturbation method and pressure rise is computed with numerical integration using symbolic software MATHEMATICA^‘TM’.The influence of selected parameters which is cilia length,and Maxwell viscoelastic material parameter i.e.relaxation time for prescribed values of wave number are visualized graphically.Pressure rise is observed to increase considerably with elevation in both cilia length and relaxation time whereas the axial velocity is markedly decelerated.The simulations provide some insight into viscous-dominated cilia propulsion of rheological mucus and also serve as a benchmark for more advanced modeling.     

Dependence of polarization mode dispersion of slotted core NZDF ribbon on cable design and environmental conditions

Non-zero dispersion fiber (NZDF) ribbon cable has recently become a considerable alternative in long-haul high-speed network construction. Since long-distance high-bit rate transmission requires low polarization mode dispersion (PMD), it is very important to know the PMD performance of this type of optical fiber cables. In this paper, we report experimental analysis of effects of the cable design and environmental parameters, in particular ribbon thickness, positions of fibers in the ribbon, flexing and vibration, on PMD performances of several slotted-core fiber ribbon cables. Results show that ribbon thickness and positions of fibers in the ribbon alter the PMD values of NZDF ribbon cables. Also, 23% and 11% PMD variations have been determined in flexing and vibration experiments, respectively. Moreover, it has been observed that vibration amplitude has significant effects and vibration frequency has little effects (14% and 6% variations, respectively) on fiber PMD. Results are important for understanding effects of installation conditions and wind, especially for aerial fibers, on PMD values of cables.