Spectrophotometric Determination of Thorium with Disodium Salt of Arsenazo-III in Perchloric Acid

A rapid and sensitive spectrophotometric method has been developed for the determination of thorium using 0.04% Arsenazo-III in a 2M perchloric acid solution. Absorbance was measured in 1 cm cell and the complex has a sensitive absorption peak at 654 nm. The complex is formed instantly in perchloric acid and remains stable for 45 minutes with constant absorbance. Beer's law is obeyed in the range 1–60 g·g^–1 of thorium concentration with a molar absorptivity at 654 nm = 3.07·10⁵ M^–1·cm^–1 at 24±2°C. The foreign ions interference in thorium determination have been checked. The cations were tested at >60-fold excess of thorium, Mn(II), Fe(III), Co(II) and Ni(II) interfere negatively, whereas only Ce(III) has increased the absorbance. Among the anions, cyanide, phosphate, thiocyanate and acetate at 150-fold excess of thorium cause significant interference. However, thorium can bedetermined in the presence of nitrate, chloride, oxalate, tartrate, ascorbate, thiosulphate and citrate. The method has been applied on certified reference material for thorium determination after extractive separation and the result was found in good agreement with the certified value. The method has been also applied successfully to determine thorium at g·g^–1 level in local ore samples with a precision of ±0.04%.     

A new route to trinuclear carbocyanines

Amides or vinylogous amides react with tosyl chloride-pyridine to form activated intermediates which condense with Fischer's base or their vinylogs to give carbocyanine structures. Under the same conditions formylated Fischer's base reacts with vinylogous Fischer's bases to give trinuclear carbocyanines in good yields. Their structure and the limitations of this route are discussed.     

Identification and characterization of fenton oxidation products of surfactants by electrospray mass spectrometry and by solid phase microextraction gas chromatography mass spectrometry. 2. Fatty alcohol polyethoxy sulphates

The Fenton reaction for the degradation of surfactants has been investigated and partial degradation products have been identified and characterized by mass spectrometry for the case of fatty alcohol polyethoxy sulphates. The polar water-soluble products were investigated by liquid chromatography/mass spectrometry (LC/MS) with electrospray ionization (ESI), and the volatile products leaving the mixture during the reaction were trapped by means of solid phase microextraction (SPME) and investigated by gas chromatography/mass spectrometry (GC/MS) with electron and chemical ionization. The oxidation leads to the formation of products with hydroxyl and epoxide groups due to insertion of oxygen atoms or with terminal ethoxylic moieties deriving from the loss of the hydrophilic sulphate group. The formation of volatile aldehydes is also observed, corresponding to the fragmentation between hydrocarbon and ethoxylic chains. The extent of mineralization is dependent on peroxide and iron(II) concentrations. Copyright 2000 John Wiley & Sons, Ltd.     

International Review of Science Solid State Chemistry,Inorganic Chemistry Series Two,Vol. 10 : Consultant Editor H.J. Emeleus FRS,Volume Editor L.E.J. Roberts,Butterworths, London, 1975, pp. 264, price £13.00

Complexes of nicotinic and isonicotinic acids and their deuterated analogues with pyridine, 4-Me pyridine and N Me imidazole have been examined by IR spectroscopy. Strong hydrogen bonding between an O atom of the acid and the N atom of the base with the H atom lying closer to the O atom, is present in all systems.     

A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

Kinetics of calcium phosphate reduction by carbon

A fundamental study was made on the reduction of calcium phosphate by carbon. The mechanism of reduction was presented on applying different additions. Both silica and alumina increased the extent of reduction but with variable rates. The activation energies were calculated on the basis of first-order reactions. The phases formed during reduction were investigated by X-ray analysis.     

Kinetics and electrochemical studies on superoxide

Rate constants for the reaction of superoxide O^- ₂ with various substrates were obtained through stationary electrode polarography theory and technique. In solvent acetonitrile, the substrate and the rate constants of the reaction O^- ₂ + AH^{- k2}Product, are, AH = isopropanol (k₂ < 0.01 M^-1 s^-1); ethanol (k₂ = 1.42 × 10² M^-1 s^-1); methanol (k₂ = 1.1 × 10⁷ M^-1 s^-1), H₂O (k₂ = 1.0 × 10⁵ M^-1 s^-1). In MeCN, O^-2 was found to be rather unreactive towards glucose and acetone but it reacts with fructose and sucrose catalytically. However, in DMF2, O^- ₂reacts with glucose and fructose with k2 order of 105 M-1 s-1. The mechanism of the reaction of O^- ₂ with the substrates (AH) is proposed as O^- ₃ + AH k₂O, AH^k2 _k-1 k [O₂H + AH]^-, _k-2O₂H + A^- with k₁ = 10⁹ M^-1 s^-1 and k^-1 = 10⁸ -10⁹ s^-1. With these values of k_-1 and k₁, k k₂(obs). The reversible E_1/2 for O₂ + e O^- ₂ in various solvents: MeCN, acetone, isopropanol, methanol, H₂O were obtained either directly from the reversible voltammogram or from experimental voltammograms and the rate constants obtained (as above) using stationary electrode polargraphy theory; E_1/2 being -0.82 (MeCN),-0.85 (acetone),-0.72 (isopropanol);-0.66 (MeOH),-0.56 (H2O) vs SCE.     

Green synthesis and characterization of monodispersed silver nanoparticles obtained using oak fruit bark extract and their antibacterial activity

Green synthesis of silver nanoparticles (Ag NPs) has been achieved using oak fruit bark extract as a reducing, capping and stabilizing agent. The biosynthesized Ag NPs were characterized using various techniques. UV–visible spectrum of prepared silver colloidal solution showed absorption maximum at 433 nm. X‐ray diffraction and transmission electron microscopy analysis revealed that Ag NPs have a face‐centred cubic structure being spherical in shape with an average particle size of 20–25 nm. The toxicity of the Ag NPs was tested on bacterial species such as Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli by comparison based on diameter of inhibition zone in disc diffusion tests and minimum inhibitory concentration and minimum bactericidal concentration of NPs dispersed in liquid cultures. The antimicrobial activity of Ag NPs was greater towards Gram‐positive bacteria (S. aureus and B. subtilis) compared to Gram‐negative bacteria as determined using standard Kirby–Bauer disc diffusion assay and serial dilution. Copyright © 2016 John Wiley & Sons, Ltd.