Effect of monomer and hydrocarbon content and polarity of the medium on the preparation of nonspherical particles via seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this work, the preparation of micron-sized polymer particles with nonspherical shapes via seeded dispersion polymerization of 2-ethylhexyl methacrylate (EHMA) with polystyrene (PS) seed particles in the presence of decane droplets and evaporation of decane after the polymerization under various polymerization conditions was discussed. The effect of monomer and decane content and polarity of the medium on the shape of the obtained particles was investigated. The experimental results showed that decreasing the amount of monomer and hydrocarbon volume of PEHMA/hydrocarbon domains, the particles decreased but they grew symmetrically, resulting in symmetric shapes. Furthermore, it was suggested that because of changing the solubility of the oligoradicals and hydrocarbon in the medium, the shape of the particles changed with changing the polarity of the medium. With decreasing the polarity of the medium, solubility of the oligoradicals in the medium increases and bigger polymer domains form on the surface of PS particles which can absorb higher amounts of decane. All of these can contribute to an increase in volume reduction after extraction of PEHMA/decane, resulting in various particle shapes. Further decreasing in polarity of the medium leads to an increase in the solubility of decane in the medium and decreasing the absorbed amount of decane by PS particles and PEHMA domains, resulting in lower volume reduction after evaporation of decane.     

Divalent manganese,cobalt, copper and cadmium complexes of (Z)‐N‐benzoyl‐N′‐(1H‐1,2,4‐triazol‐3‐yl)carbamimidothioic acid: Preparation,characterization, computational and biological studies

In this work, (Z)‐N‐benzoyl‐N′‐(1H‐1,2,4‐triazol‐3‐yl)carbamimidothioic acid and its Mn(II), Co(II), Cu(II) and Cd(II) complexes were introduced for the first time. This carbonyl thiourea ligand was prepared by the reaction of 1H‐1,2,4‐triazol‐3‐amine with benzoyl isothiocyanate. The structural elucidation of these compounds was performed using elemental analysis and spectral and magnetic measurements. Octahedral structures of all complexes, except Cd(II) complex with a tetrahedral geometry, were confirmed by applying DFT structural optimization. The thermal decomposition behaviour of metal complexes of carbonyl thiourea ligand is discussed. The calculation of kinetic parameters for prepared complexes (E_a, A, ΔH*, ΔS* and ΔG*) of all thermal degradation stages has been evaluated using two comparable approaches. Antimicrobial and ABTS‐antioxidant studies indicated potent activity of Cd(II) complex compared with the other investigated compounds. The cytotoxic activity of the prepared compounds was investigated in vitro. The results indicated potent activity of Mn(II) complex against both HePG2 (liver carcinoma) and MCF‐7 (breast carcinoma) cancer cells.     

Gold-surface binding of molecular switches studied by M?ssbauer spectroscopy

The nonanuclear coordination compound [Mo^IV{(CN)Fe^III(3-methyl-saldptn)}₈]Cl₄ exhibits multiple spin transitions (3-methyl-saldptn = N,N′-bis(3′′-methyl-2′′-hydroxy-benzyliden)-1,7-diamino-4-azaheptane). This spin crossover cluster is bound via a self-assembled monolayer onto a two dimensional array gold surface. M?ssbauer spectroscopy indicates that the thermally and optically induced spin crossover of the compound is maintained. Thereby, the foundation for its potential practical application (e.g. in the field of information storage) was laid.     

Copper nanoclusters as peroxidase mimetics and their applications to H2O2 and glucose detection

Copper nanoclusters (Cu NCs) are found to possess intrinsic peroxidase-like activity for the first time. Similar to nature peroxidase, they can catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine by H₂O₂ to produce a nice blue color reaction. Compared with horseradish peroxidase, Cu NCs exhibits higher activity near neutral pH, which is beneficial for biological applications. The increase in absorbance caused by the Cu NCs catalytic reaction allows the detection of H₂O₂ in the range of 10 μM to 1 mM with a detection limit of 10 μM. A colorimetric method for glucose detection was also developed by combining the Cu NCs catalytic reaction and the enzymatic oxidation of glucose with glucose oxidase. Taking into account the advantages of ultra-small size, good stability, and high biocompatibility in aqueous solutions, Cu NCs are expected to have potential applications in biotechnology and clinical diagnosis as enzymatic mimics.     

A novel reaction cascade leading to a spontaneous intramolecular dipolar cycloaddition through simultaneous generation of 1,3-dipole and dipolarophile

Ornithine methyl ester reacts with aromatic aldehydes to generate bis-Schiff bases, which depending on the structure of the aromatic aldehyde, further undergo an intramolecular cycloaddition through the transient formation of a reactive 1,3-dipole.     

Synthesis and Structural Proof of a Potent 5-Lipoxygenase Inhibitor

Abstract  

5-Lipoxygenase inhibitor 3-O-acetyl-9,11-dehydro-β-boswellic acid was detected in the extract of Boswellia serrata gum resulting from unstable 11-hydroxy precursor. It was reported more potent than other Boswellic acids in its inhibition of 5-Lipoxygenase. Here, we report the method of conversion of 3-acetoxy-β-boswellic acid to 3-O-acetyl-9,11-dehydro-β-boswellic acid, and the crystal structure of later. This compound crystallizes in orthorhombic space group P2₁2₁2₁ with cell parameters of a = 12.726(1) ?, b = 16.597(1) ?, c = 27.332(2) ?, α = β = γ = 90°, V = 5772.7(5) ?³, D _c = 1.143 Mg/m³, and Z = 8. The X-ray structure investigation indicates that the rings A, B, D and E are exhibit chair and the ring C adopts a distorted half chair conformation. The conformational difference of the two structures in the arrangement is due to crystal packing of 3-O-acetyl-9,11-dehydro-β-boswellic acid. The molecular packing is stabilized by C–H···O and O–H···O types of hydrogen bonding interactions.     

Synthesis of primary amines: first homogeneously catalyzed reductive amination with ammonia

[reaction: see text] The synthesis of primary amines via reductive amination of the corresponding carbonyl compounds with aqueous ammonia is achieved for the first time with soluble transition metal complexes. Up to an 86% yield and a 97% selectivity for benzylamines were obtained in the case of various benzaldehydes by using a Rh-catalyst together with water-soluble phosphine and ammonium acetate. In the case of aliphatic aldehydes, a bimetallic catalyst based on Rh/Ir gave improved results.     

Superconductivity in Sr<Subscript>0.75</Subscript>Y<Subscript>0.75</Subscript>Ba<Subscript>1.5</Subscript>Cu<Subscript>3</Subscript> O<Subscript>7−<Emphasis Type="Italic">d</Emphasis></Subscript> compounds

The effect of simultaneous Sr substitution at the Ba and Y sites has been studied in the Sr_0.75Y_0.75Ba_1.5Cu₃O_7–dsystem. Attempts to replace 25% Y and 25% Ba have been successful and superconductivity was observed above 78 K for Sr_0.75Y_0.75Ba_1.5Cu₃O_7–d compound with high oxygen content, i.e., O_6.76, and having orthorhombic crystal symmetry. The compound was treated in argon gas at 800°C to reduce the oxygen content and to induce some structural changes. The Sr_0.75Y_0.75Ba_1.5Cu₃O_6.1 compound thus obtained has tetragonal symmetry and low oxygen content, O_6.1. It has also shown superconductivity at 28 K. The paper presents a careful comparison of the structural and electrical properties and infrared absorbance spectra of the two compounds with the same metallic composition, Sr_0.75Y_0.75Ba_1.5Cu₃, but with different oxygen content and crystal symmetry. The study clearly establishes the occurrence of superconductivity in tetragonal Sr-substituted (both at Y and Ba sites in) YBCO.     

Varying Track Etch Rates along the Fission Fragments＇ Trajectories in CR-39 Detectors

We determine the behavior of track etch rate VT along the tracks in CR-39 detectors exposed to fission fragments from ^252Cf source. CR-39 detectors are etched at 70℃ in different concentrations of Na2COa-mixed 6M NaOH solutions for different etching time intervals of 5-10min starting from 15 min up to 210min. Two values of track etch rate are determined along the fission fragment trajectories. The variation in VT is correlated with the energy loss rate of the fission fragment in the detector material.     

Extended Lattice Boltzmann Model

Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for small flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and the isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model also remains valid for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow.