Simultaneous determination of serotonin and 5-hydroxyindole-3-acetic acid in human urine by automated precolumn derivatization and semi-microbore column liquid chromatography with fluorescence detection.

An improved high-performance liquid-chromatographic (HPLC) assay for the simultaneous determination of serotonin (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) in human urine is reported. Following the automated precolumn derivatization of urinary 5-HT and 5-HIAA with benzylamine, the derivatives are separated by isocratic elution on a reversed-phase C18 semi-microbore column, and are fluorometrically detected at an excitation wavelength of 345 nm and an emission wavelength of 480 nm. The detection limits of 5-HT and 5-HIAA are 7 and 5 nmol/l in urine (0.7 and 0.5 fmol/20-microl injection). The proposed automatic method permits a highly selective and sensitive determination of 5-HT and 5-HIAA in human urine without any sample purification.     

InGaAs/InAlAs Five Layer Asymmetric Coupled Quantum Well (FACQW) for Ultra-Wideband Ultrafast Optical Modulators

An InGaAs/InAlAs five-layer asymmetric coupled quantum well (FACQW) is expected to show very large electrorefractive index change. n in a wideband transparency region. Band structures of the FACQW are analyzed with Luttinger-Kohn Hamiltonian. The electrorefractive characteristics of the FACQW are discussed.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

Chain-growth polycondensation for well-defined aramide. Synthesis of unprecedented block copolymer containing aramide with low polydispersity

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and a block copolymer containing this well-defined aramide was synthesized. Phenyl 4-aminobenzoate, which would yield poly(p-benzamide), did not polymerize under the conditions of chain-growth polycondensation. However, phenyl 4-(4-octyloxybenzylamino)benzoate (1b) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate (2) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers. Thus, phenyl 4-(octylamino)benzoate (1a) polymerized in the presence of 2 and base, followed by addition of 1b and base to the reaction mixture of the prepolymer to yield the block copolymer of 1a and 1b with a controlled molecular weight and a low polydispersity. The block copolymer was treated with TFA, resulting in a soluble block copolymer of poly(N-octyl-p-benzamide) and poly(p-benzamide). The SEM images of the supramolecular assemblies of the block copolymer showed mum-sized bundles and aggregates of flake structures.     

Chelate and intramolecular ion-pair formation: A guiding concept for structure/selectivity relationships in the liquid-liquid extraction of alkali and alkaline earth metal ions by anionic crown ether derivatives

Crown ether dyes with pendent anionic side-arms were synthesized for extractionspectrophotometry of alkali and alkaline earth metal ions. Dramatic changes in metal selectivity were obtained simply by changing the nature of the anionic side-arm on the same crown ether skeleton. A structure/metal selectivity relationship is discussed in detail in terms of “chelate” and “intramolecular ion-pair” formation. Small metal cations (high charge density) are preferred in the extraction by a crown ether reagent with a charge-localized anionic side-arm through the formation of a “chelate”. Large metal cations (low charge density) are preferred in the extraction by reagents with a charge-delocalized anionic side-arm through the formation of an “intramolecular ion-pair”. Steric restrictions imposed by the side-arm on the metal ion approaching the crown ether are also important factor in controlling the selectivity of these reagents.     

Determination of ammonium ion in a flow-injection system with a gas-diffusion membrane : Selection of Optimal Conditions for the pH Indicator

The spectrophotometric determination of ammonium ion in water by flow-injection analysis with a membrane-separator and a pH indicator for detection is studied in detail. The relations derived facilitate the selection of appropriate solution compositions or the prediction of sensitivity. It is shown that 1.5×10^?5 M bromocresol purple (pH 6.8) as acceptor solution gives the maximal sensitivity in the flow system with a laboratory-made separation unit. Application of ultrasonic radiation in the separation step and the use of different flow rates for the donor and acceptor streams may result in increased permeation of ammonia and a correspondingly high sensitivity. By modifying the acceptor solution so that the sensitivity is decreased, more concentrated samples such as urine can be analyzed by direct injection without prior dilution. In this procedure, the sample rate was 60 h^?1 for ammonium concentration of more than 10^?5 M and 30–40 h^?1 for concentrations in the range 3×10^?7?10^?5 M. The detection limit was about 3×10^?7 M.