A simple and sensitive method for the determination of hydroxylamine in fresh-water samples using hypochlorite followed by gas chromatography.

A new and simple method for the determination of hydroxylamine in environmental water, such as fresh rivers and lakes using hypochlorite, followed by its gas choromatographic detection, has been developed. A glass vial filled with sample water was sealed by a butyl-rubber stopper and aluminum cap without head-space, and then sodium hypochlorite solution was injected into the vial through a syringe to convert hydroxylamine to nitrous oxide. The head-space in the glass vial was prepared with 99.9% grade N2 using a gas-tight syringe. After the glass vial was shaken for a few minutes, nitrous oxide in the gas-phase was measured by a gas chromatograph with an electron-capture detector. The dissolved nitrous oxide in the liquid-phase was calculated according to the solubility formula. The proposed method was applied to the analysis of fresh-water samples taken from Iu river and Hii river, flowing into brackish Lakes Nakaumi and Shinji, respectively.     

Direct determination of benzamides in serum by column-switching high-performance liquid chromatography.

A column-switching high-performance liquid chromatographic method with fluorescence detection was developed for the simultaneous determination of four benzamide-type anti-psychotic drugs: sulpiride, tiapride, sultopride and metoclopramide in human serum. In this method, a TSKgel Super-ODS column was used as an analytical column, and a TSKgel G 2000SW was prepared as a pretreatment column. Under the optimized analytical conditions, four benzamide-type anti-psychotic drugs were eluted within 18 min. The detection limits (S/N = 3) for sulpiride, tiapride, sultopride and metoclopramide are 1 ng/ml, 4 ng/ml, 2 ng/ml and 0.5 ng/ml, respectively. Finally, the method was applied to the determination of sulpiride in human serum samples obtained after a single oral dose of sulpiride.     

Hydroxylation of ionized aromatics including carboxylic acid or amine using recombinant Streptomyces lividans cells expressing modified biphenyl dioxygenase genes

The bphA1(2072)A2A3A4 gene cluster codes for a shuffled biphenyl dioxygenase holoenzyme with broad substrate specificity. These bphA1(2072)A2A3A4 genes were expressed in the actinomycetes Streptomyces lividans using a thiostrepton-inducible promoter P_tipA. Biotransformation experiments of various aromatics including carboxylic acid or amine in their molecular structure, such as 1-naphthoic acid, 2-(1-naphthyl)acetic acid, diphenylamine, and 1-benzyl-4-piperidone, were performed using the recombinant S. lividans cells. These ionized aromatics were converted to the corresponding 1,2-dihydrodiol, mono- or tri-hydroxy forms in 48 h. The structure of the converted products was determined by their EI-MS, ¹H- and ¹³C NMR analysis, and several products were found to be novel compounds.     

Photochemical Ionic-Conductivity Switching Systems of Photochromic Crown Ethers for Information Technology

Design of two types of ion-conducting systems using photochromic crown ethers as the photocontrol agents is described; one type is based on the phase transition of azobenzene derivatives induced by their photoisomerization and the other based on the molecular control of metal ion complexation by crowned spirobenzopyrans. The photoresponsive ion-conducting systems are applicable to electrostatic imaging and photorefractive materials.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

A superoxide dismutase-modified electrode that detects superoxide ion

A superoxide dismutase (SOD)-modified electrode, in which SOD is oriented on the gold electrode via a self-assembled monolayer of cysteine so as to allow its direct electrode reaction, possesses a bi-directional electrocatalysis for both the oxidation of superoxide ion (O2-) to O2 and the reduction of O2- to H2O2 and functions as a third generation O2- biosensor.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

N-Arylation of 4-fluoro-5-trimethylsilyl-1H-pyrazole

The 1,3-dipolar cycloaddition reaction of fluoro(trimethylsilyl)acetylene prepared in situ with an excess of diazomethane smoothly proceeded to give the corresponding 4-fluoro-5-trimethylsilyl-1H-pyrazole in 84% yield. The copper iodide-catalyzed N-arylation of the fluorinated pyrazole with a variety of aryl iodides afforded N-aryl-4-fluoropyrazoles as desilylation products in good to excellent yields.     

Unprecedented double nucleophilic addition of a hydride at a central carbon of an eta3-allyl ligand

Treatment of eta(3)-allyl compound [Cp(2)Mo(eta(3)-C(3)H(5))](+)(1; Cp =eta(5)-C(5)H(5)) with MH (M = Li, Na) resulted in reduction of the allyl ligand to give propane. Deuterium-labeling studies were used to trace the origins and fates of the hydrogen atoms. The mechanism is discussed in light of the HSAB principle. The studies showed that the formation of propane can be explained by 1,2-hydrogen migration from the central to the terminal carbon of the allyl ligand, and the subsequent double nucleophilic addition of the hydride at the central carbon.