Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007     

Determination of styrene in olive oil by an automatic purge-and-trap system coupled to gas chromatography-mass spectrometry

Summary A new gas chromatographic method using an automatic purge-and-trap system coupled to a GC with mass selective detection to analyze styrene at the parts-per-trillions (ng kg^–1) level is described. The method shows a good sensitivity and the detection limit is 10 ng kg^–1 with a relative standard deviation (RSD) of 4.7% for 164 ng kg^–1 styrene in olive oil. This analytical method has been successfully applied to the analysis of styrene in extra-virgin olive oil from the European market.     

Synthesis of the insect antifeedant CDE molecular fragment of 12-ketoepoxyazadiradione and related compounds

A diastereoselective synthesis of the model insect antifeedant 29 a CDE molecular fragment of 12-ketoepoxyazadiradione has been achieved in ten steps from indenone 9 in 44% overall yield. Several of the compounds obtained along the synthesis related to model compound 29 show significant antifeedant activity against Spodoptera littoralis and Spodoptera frugiperda.     

Phase transitions in silicon single crystals resulting from directional plastic deformation

The formation of polytypic modifications is observed in dislocation-free silicon single crystals under directional plastic deformation. It is shown that the deformation-stimulated phase appears on the surface of the sample in the form of small grains ranging from several hundred to several thousand angstroms in size. A twin structure in the individual grains is observed. Fiz. Tverd. Tela (St. Petersburg) 40, 746–749 (April 1998)     

Validation of the methods for heavy metal speciation in soils and sediments

The knowledge of the chemical forms of metals is used to assess their availability and uptake by plants, and in sediments the forms of metals determine their transport and mobility in the aquatic media. This information may be obtained by determining chemical forms of metals (speciation) or different phases in which the metals are bound, obtained by applying extraction schemes. The analytical methods used include different steps and all of them must be validated. We report here the recommendations to minimize the errors in this kind of analysis. For validation the use of Certified Reference Materials (CRMs) and the participation in interlaboratory exercises are highly recommended.     

Micellar catalysis in kinetic methods of analysis: improvement of spectrophotometric catalytic determination of copper

The combined effects of micellar and chemical catalysis were studied with a view to improving the features of catalytic kinetic determinations. For this purpose we chose the reaction between N,N-dimethyl-p-phenylenediamine (DPD) and N,N-dimethylaniline (DA) to form Bindschedler's Green leuco base, which is oxidized by hydrogen peroxide in a reaction catalysed by Cu(II). This reaction was found to be accelerated by anionic sodium dodecylsulphate (SDS) and cationic dodecyltrimethylammonium bromide (DTAB) micelles. Several advantages were gained in relation to the analytical features of the kinetic photometric determination of Cu(II) when the reaction was developed in the presence of micelles compared to that occurring in an aqueous medium. Such advantages include a lower detection limit, higher sensitivity, precision and solubility of DPD and DA, and substantially increased selectivity in some cases. A detailed study of the parameters which influence both reactions is reported. Some observations on the effect of SDS and DTAB on the reaction are also commented on.     

The Role of γ -Aminopropyltriethoxysilane (γ -APS) on Thermal Stability of TEOS-PDMS Ormosils

The degradation process of TEOS-PDMS Ormosils containing different amounts of γ -APS has been studied by means of DTA, TG, FTIR and ²⁹Si-NMR measurements. It has been found that the amount of γ -APS improved the thermal properties of Ormosil materials. The increase in γ -APS content causes the increment on the decomposition temperatures and activation energies of the studied Ormosils. These results have been attributed to the favourable effect of γ -APS in the copolymerisation reaction between TEOS and PDMS molecules. ²⁹Si-NMR analyses have shown that the incorporation of γ -APS increases the concentration of D(Q) units in the Ormosil structure, i.e., increases the number of TEOS molecules bonded to PDMS ones. Initial decomposition temperature (IDT), temperature of maximum weight loss rate (T_max), integral procedure decomposition temperature (IPDT) and activation energy values (E) were calculated from different equations which described the degradation of these materials. Addition of 10 wt% γ -APS produced an increase of 63^∘C in the IDT and of 115 and 110^∘C, respectively, for T_max and IPDT (up to 478 and 610^∘C) compared to the free γ -APS Ormosil. Activation energy values also rise up to 69.4 kJ⋅ mol⁻¹ by introducing 10 wt% of γ -APS.     

Surface characterization of three marine bacterial strains by Fourier transform IR, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry, correlation with adhesion on stainless steel surfaces

Adhesion of bacterial strains on solid substrates is likely related to the properties of the outer shell of the micro-organisms. Aiming at a better understanding and control of the biofilm formation in seawater, the surface chemical composition of three marine bacterial strains was investigated by combining Fourier transform IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary-ion mass spectrometry (ToF-SIMS). The D41 strain surface showed evidence of proteins, as deduced from the NH2 and NCO XPS and ToF-SIMS fingerprints; this strain was found to adhere to stainless steel, glass, or Teflon surfaces in a much higher quantity (2 orders of magnitude) than the two other ones, DA and D01. The latter are either enriched in COOH or sulfates, and this makes them more hydrophilic and less adherent to all substrates. Correlations with physicochemical properties and adhesion seem to demonstrate the role of the external layer composition, in particular the role of proteins more than that of hydrophobicity, on their adhesion abilities.     

Comparison of pre-reducing agents for antimony determination by hydride generation atomic fluorescence spectrometry

A systematic study of antimony reduction prior to its determination by hydride generation atomic fluorescence spectrometry (HG-AFS) was carried out. The efficiency of l-cysteine, potassium iodide and potassium iodide/ascorbic acid was studied for this purpose. The hydride generation step was optimised in the presence of those pre-reductors. From the results, l-cysteine was found to be the most suitable pre-reducing agent. Methodology was validated, obtaining detection limits lower than 90 ng l⁻¹ and repeatability and reproducibility better than 3% R.S.D. and 5% R.S.D., respectively, in all cases. In order to evaluate the methodology developed and the influence of the matrix, recovery from waters from different sources was tested by HG-AFS and also by inductively coupled plasma mass spectrometry (ICP-MS). Accuracy was assessed by analysing three water reference materials at different antimony concentration levels. The high sensitivity of the developed methodology enables it to be applied for monitoring drinking waters according to the maximum admissible concentration of antimony established by the EU Directives.     

Fluorimetric determination of beryllium with pyridoxal-5-phosphate

A simple, rapid and selective method for the determination of beryllium with pyridoxal-5-phosphate has been developed. The system is only fluorescent (lambda(ex) 360, lambda(em) 460 nm) in the presence of a nitrogenous base such as ammonia, ethylenediamine or pyridine, owing to the possible formation of a ternary complex. The calibration graph is linear over the range 8-60 ng ml . The high selectivity of the method permits the determination of beryllium in various types of alloys.