Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Synthesis and characterization of polycarbonyl compounds via their BF2-adducts

A cobalt-catalyzed 1,4-hydrovinylation reaction is the key step in the synthesis of 1,3-dicarbonyl and higher tri- and tetracarbonyl compounds after ozonolysis of the 1,4-diene intermediates. For the isolation and characterization of the products, the 1,3-dicarbonyl subunits were complexed with a BF(2)- or a BR(2)-fragment eliminating the keto-enol tautomerisation. Other 2,3-disubstituted 1,3-butadienes can be generated by a Grubbs enyne metathesis of a symmetrical internal alkyne with ethene. After hydrovinylation and ozonolysis, other 1,3-diketones are accessible.     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Surface instabilities of thin liquid film flow on a rotating disk

 Steady flow of a liquid jet from a nozzle onto the centre of a rotating disk is studied with a streak line method to determine the superficial velocity of the spreading liquid film. Good agreement is found with an asymptotic analysis of the unperturbed flow field. Experimentally, the liquid surface is always perturbed by surface waves which appear as regular spirals, steady in the laboratory system in the low Reynolds number range. It could be shown that wave formation is very sensitive to entrance conditions. Therefore, it is assumed that wave generation is an entrance effect which acts as periodic forcing on the forming liquid film. Wave velocities outside the entrance region are measured and proved to be in good agreement with the prediction of a linear stability theory, as long as the flow rate and entrance perturbations are small. At higher flow rates or stronger disturbances, the radial development of the wave velocities takes on the characteristics predicted by nonlinear stability theories and is in qualitative agreement with experiments performed on an inclined plane. Received: 15 January 1998/Accepted: 8 June 1998     

帕隆藏布流域堆积体边坡的工程地质特征及稳定性评价

位于藏东南的帕隆藏布流域,处在东喜马拉雅构造结的北缘,是新构造强烈隆升区,断层、褶皱等地质构造发育。在青藏高原隆升及气候变化等内外动力作用下,研究区内堆积体分布广泛,具有独特的工程地质特征并成为该区内地质灾害的主要物源。由于河流的下切及川藏公路的修建,形成了许多高陡的堆积体边坡,以冰碛边坡最为典型。由于其特殊的物源特征及形成过程,冰碛物具有粒度分布范围广、粗粒含量多等与其他沉积物不同的粒度特征。冰碛物粒度分布范围广的特征,导致随着研究尺度的不同,其结构特征也不相同,具有明显的尺度效应。冰碛土的力学强度一般强于其他堆积体,但受不同粒径颗粒的含量及分布、形成时代的影响,其力学特征也有所差异。作者对川藏公路沿线部分典型的剖面进行了量测,所量测的剖面虽然只是整个斜坡的一部分,与经验数据相比,仍表现出高陡的特征,而且很多边坡在既高且陡的形态下仍能保持稳定。本文以极限平衡理论为基础,采用多种方法对这类边坡的稳定性进行计算分析,求出边坡的安全系数。考虑各种地震烈度下边坡的稳定性,得出这些边坡的安全系数与地震加速度具有严格的指数相关关系。     

The Compressibilities of Liquid Phase Host-Guest Systems

The compressibilities of seven liquidphase, macrocyclic host-guest systems were determinedat approximately 25 °C and 3.4 × 10⁷ Pa.Each two-component system consisted of a cyclodextrin,a calixarene, or a crown ether as host and anappropriate solvent as guest. In each case studied,the host-guest system was found to be lesscompressible than the pure solvent, with thedifferences ranging from 2 to 18% of the magnitudesof the pure solvent compressibilities. These findingshave enabled us to better understand how strong,ambient pressure, intermolecular host–guestinteractions influence the compressibility ofsolutions. Both inclusion and solvationcontribute.     

Evaluation of PM3, AM1, and MNDO for calculation of higher energy ionization potentials

Higher ionization energies were calculated with PM3, AM1, and MNDO for three series of molecules, representative small molecules, molecules containing heteroatoms, and sterically congested alkenes. Values from PM3, AM1, and MNDO were compared to experimental values. In most instances, the semiempirical calculations correctly predict the ordering of higher ionization energies. In the absence of steric hindrance, MNDO is the method of choice. Within groups of molecules, AM1 performs better on hydrocarbons, especially twisted hydrocarbons, than PM3. PM3 commonly gives sigma orbitals which are too high in energy compared to related pi orbitals. PM3 performed better than AM1 with molecules containing oxygen, but failed to give the correct geometry for hydrogen peroxide.     

Enantioselective installation of adjacent tertiary benzylic stereocentres using lithiation–borylation–protodeboronation methodology. Application to the synthesis of bifluranol and fluorohexestrol

1,2-Diaryl ethanes bearing 1,2-stereogenic centres show interesting biological activity but their stereocontrolled synthesis has not been reported forcing a reliance of methods involving diastereomer and enantiomer separation. We have found that this class of molecules can be prepared with very high stereocontrol using lithiation–borylation methodology. The reaction of an enantioenriched benzylic lithiated carbamate with an enantioenriched benzylic secondary pinacol boronic ester gave a tertiary boronic ester with complete diastereo- and enantiocontrol. It was essential to use MgBr₂/MeOH after formation of the boronate complex, both to promote the 1,2-migration and to trap any lithiated carbamate/benzylic anion that formed from fragmentation of the ate complex, anions that would otherwise racemise and re-form the boronate complex eroding both er and dr of the product. When the benzylic lithiated carbamate and benzylic secondary pinacol boronic ester were too hindered, boronate complex did not even form. In these cases, it was found that the use of the less hindered neopentyl boronic esters enabled successful homologation to take place even for the most hindered reaction partners, with high stereocontrol and without the need for additives. Protodeboronation of the product boronic esters with TBAF gave the target 1,2-diaryl ethanes bearing 1,2-stereogenic centres. The methodology was applied to the stereocontrolled synthesis of bifluranol and fluorohexestrol in just 7 and 5 steps, respectively.