Harze und Harzs?uren

Ohne Zusammenfassung     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

Constitution moleculaire d'α,ω-difluoropolydimethylsiloxanes equilibres obtenus par une reaction de redistribution

α,ω-Difluoropolydimethylsiloxanes F[(CH₃)₂SiO]_n(CH₃)₂SiF have been prepared by reaction of (CH₃)₂SiF₂ with cyclic dimethylsiloxanes [(CH₃)₂SiO]_n (n = 3 or 4). An equilibrium is reached in the redistribution of fluorine vs. oxygen atoms after ca. 24 h at 200°C or 15 days at 150°C when catalysed by AlCl₃. 16 equilibrated samples of varied (R = F/Si) overall compositions have been analysed by ¹H and ¹⁹F NMR and by VPC. The presence of rings has been established for the lower values of R. The molecular constitution of the equilibrated samples is described by a set of constants. The abundance of the end units

is slightly larger than expected from random distribution. The good resolution of the spectra permits the distinguishing of the 9th order of environment of the end units and the 5th order for the middle units and the verification that there is no preferential association among the building units, and thus the proportion of chains of various lengths obeys Flory's random distribution mode. The equilibrium molecular constitution of these α,ω-difluorosiloxanes is close to that of their dichloro analogs; the substitution of chlorine by fluorine atoms at the end of the chains thus appears to cause little perturbation. On the other hand, the kinetic evolution of the reaction appears to be different, since the first species which forms is always the pyro molecule

instead of long chains and large rings as in the case of the chloro analogs.     

Agglomération contrôlée de latex par formation de complexes tensioactifs anioniques : copolymères à blocs à base de poly(oxyde d’éthylène)

For polystyrene–poly(ethylene oxide) (PS–PEO) diblock copolymers, as micellar dispersions in aqueous medium, the formation of complexes with anionic surfactants, such as sodium dodecylsulfate (SDS) could be confirmed. The number of SDS molecules fixed per EO unit is close to the values reported for the SDS–PEO homopolymer interaction. Advantage of this type of complexation was taken to develop a controlled agglomeration process for SDS stabilized PS and PVC latexes by using as agglomerants ‘hairy’ latexes of PS and PVC that have been synthesized in the presence of PS–PEO block copolymers and that carry therefore a fringe of PEO sequences on their surface. The complexation of SDS by these surface-anchored PEO chains leads to the destabilization of the anionic latex, which has a tendency to precipitate onto the surface of the agglomerant latex. The average particle size and the size distribution of the agglomerated particles were studied as a function of the weight and number ratio of the two types of latexes involved in the agglomeration process, as well as in function of the surface coverage by SDS and PEO respectively. By adjusting these parameters, it was possible to obtain, with an efficiency of almost 100%, latex agglomerates with a monomodal distribution in the size range of 1 to 40 μm. An agglomeration mechanism could be outlined taking into account the complexation capacity and the specific surface of the agglomerating ‘hairy’ latex. To cite this article: P. Peter et al., C. R. Chimie 6 (2003).     

19F NMR chemical shifts of n-F-alkyl compounds

The examination of ¹⁹F chemical shifts for ca. 650 F-alkylated compounds of general formula CF₃(CF₂)_nCF₂X led to the following conclusions: the CF₂ groups α to X are very sensitive to the nature of X, and are spread over a range of 85 ppm. The effect of the length of the F-alkyl chain decreases rapidly, so that δCF₂(α) can already be considered as characteristic of X for n = 1 or 2 for most practical purposes. Solvent effects (in 9 different solvents having ε = 1.8 to 52.1) were found to be rather small except for the F-alkyl iodides. A chart which indicates the domain in which the CF₂(α) resonance signal is to be expected is given for 42 different series of F-alkylated compounds; it is expected to provide the synthetic chemist with a useful tool for the identification and characterization of such compounds.     

Perfluoro compounds as blood substitutes.

Inconceivable as it is, it has been proved that animals can survive after having had their blood massively or even totally replaced by emulsions of perfluorinated compounds in salines. “Bloodles” rats charged with an emulsion of perfluorotri-n-butylamine survived a five hour period in an atmosphere containing 50% oxygen and 50% carbon monoxide, i.e. in conditions where the transport of oxygen by the red cells is entirely blocked. This review discusses: (1) the experiments which have demonstrated the capability of blood substitutes based on perfluorinated compounds to sustain life; (2) the characteristics and preparation of the relevant perfluoro compounds and the production and handling of their emulsions; (3) their “physiology”, i.e. toxicity, life-span in the blood-stream, effect on the organs and their functions, and excretion properties. Obstacles remaining to be overcome in order to provide a safe blood substitute for medical practice include the availability of numerous series of well-defined pure and inert perfluorinated chemicals, the production of stable emulsions, the optimization of fluid balance, and the attainment of reasonable excretion rates. The accent is placed upon the role of the chemist in the progress of this research.     

Action des perfluoroalkylcuivre(I) sur les perfluoroalkylethylenes

A series of new polyfluorinated dienes 3, containing the novel -CFCHCHCF-, pattern has been synthesized (50–70% yields) by reacting perfluoroalkyl iodides with perfluoroalkyl-ethylenes in the presence of copper. The monoalkenes R_fCFCHCH₂CF₂R′_f and the saturated compounds R_fCF₂CH₂CH₂CF₂R′_f were obtained by varying the experimental conditions. The ¹H and ¹⁹F NMR spectra are analysed and the reaction mechanism is discussed.