Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Multi-Wavelength Optical Packet Routing Technologies Based on Superstructured Fiber Bragg Gratings

A WDM compatible Edge-to-Edge Self-Routed optical packet switched network that simplifies the optical processing is proposed. The system employs all-optical packet label generation and recognition using coded superstructured Fiber Bragg gratings.     

Inclusive\bar K^{0*} (892) andK 0*(892) production on silicon by 200 GeVK − andπ −

The production of the neutralK ^? (892) resonances by 200 GeVK ^? andπ ^? has been studied over the kinematic range 0.0<x _f<1.0 andp _t ² <5.0 GeV². Longitudinal and transverse momentum distributions are presented. In addition the decay angular distributions inK ^? fragmentation to \(\bar K^{0*} \) have been investigated.     

Lifetimes of charged and neutralD mesons

We have measured the lifetimes of hadronically produced charged and neutralD mesons using silicon microstrip detectors and an active silicon target in the NA32 spectrometer at the CERN SPS. We obtainτ _D± = (10.9± _1.5 ^1.9 )·10^?13s andτ _D ^(?)10 = (4.2±0.5)·10^?13s based on 59 and 90 fully reconstructed decays respectively, giving a ratioτ _D±/τ _D ^(?)10 of 2.6 ±0.5.     

Joint production of ϕ mesons andπ ±,π 0,p,\bar p,K s 0 andK ± in hadronic interactions

The joint production of ? mesons andπ ^±,π ⁰,p, \(\bar p\) ,K _s ⁰ andK ^± is investigated using a sample of 600,000 inclusive ? meson events obtained in hadron Be interactions with incidentπ ^±,p, \(\bar p\) andK ^± beams. Evidence is presented for the joint production of ? mesons and strange particles produced with non-strange incident beams. With incidentK ^± beam the number of additional strange particles is suppressed. The results are found to be in agreement with the qualitative predictions of a parton fusion model. The comparison with the Lund model for lowp _T processes is fair.