Spectroscopic studies of water-soluble sulfonated calix[6]arene

Fluorescence and absorption studies of water-soluble sulfonated calix[6]arene (SCX6) are reported. Water-soluble calixarenes are potentially useful as host molecules for luminophores, and studies of their spectroscopic characteristics are therefore crucial. The absorption and fluorescence spectra of these molecules in aqueous solution were collected, analyzed, and compared with 4-hydroxybenzene sulfonate at different pHs. A red shift in the absorption spectrum and a change in the fluorescence spectrum of the calixarenes are observed upon an increase in pH from 2.0 to 13.0. Some of these spectroscopic changes are attributed to intramolecular hydrogen bonding between adjacent hydroxyl groups of SCX6 after proton disassociation. The formation of excimers between phenolic groups in the calixarene molecule is proposed. In addition, inner-filter effects of SCX6 are discussed. These inner-filter effects prove to be a disadvantage for the use of SCX6 as a host molecule for complexation studies by use of fluorescence probes whose absorption spectra overlap with those of calixarenes.     

EDOT‐diketopyrrolopyrrole copolymers for high bulk hole mobility and near infrared absorption

To obtain novel low‐bandgap materials with tailored hole‐transport properties and extended absorption, electron rich 3,4‐ethylenedioxythiophene is introduced as a comonomer in diketopyrrolo[3,4‐c]pyrrole copolymers with different aryl flanking units. The polymers are characterized by absorption and photoluminescence spectroscopy, dynamic scanning calorimetry, cyclic voltammetry, and X‐ray diffraction. The charge transport properties of these new materials are studied carefully using an organic field effect transistor geometry where the charge carriers are transported over a narrow channel at the semiconductor/dielectric interface. These results are compared to bulk charge carrier mobilities using space‐charge limited current (SCLC) measurements, in which the charge carrier is transported through the complete film thickness of several hundred nanometers. Finally, charge carrier mobilities are correlated with the electronic structure of the compounds. We find that in particular the thiophene‐flanked copolymer PDPP[T]₂‐EDOT is a very promising candidate for organic photovoltaics, showing an absorption response in the near infrared region with an optical bandgap of 1.15 eV and a very high bulk hole mobility of 2.9 × 10^?4 cm² V^?1 s^?1 as measured by SCLC. This value is two orders of magnitudes higher than SCLC mobilities reported for other polydiketopyrrolopyrroles and is in the range of the well‐known hole transporting polymer poly(3‐hexylthiophene). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 639–648     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951     

Monitoring VIV fatigue damage on marine risers

Long flexible cylinders (e.g., risers, tendons and mooring lines) exposed to the marine environment encounter ocean currents leading to vortex-induced vibration (VIV). These oscillations, often driven at high frequencies over extended periods of time, may result in structural failure of the member due to fatigue damage accumulation. Recent developments in instrumentation and installation of data acquisition systems on board marine risers have made accurate measurement of riser responses possible. This paper aims at using the data from these data acquisition devices (typically strain gages and accelerometers) in order to understand the evolution of the riser VIV, with the final aim of estimating the fatigue damage. For this purpose we employ systematic techniques to reconstruct riser VIV response using the data from the available sensors. The reconstructed riser response allows estimation of the dynamic axial stresses due to bending and consequently the estimates of the fatigue damage along the entire riser. The above methods can take into account the fatigue damage arising from complicated riser motions involving the presence of traveling waves even with the use of very few sensors. An alternate approach using a Van der Pol wake oscillator model is also explored to obtain fatigue life estimates caused by riser VIV.     

A systematic approach to riser VIV response reconstruction

Vortex-induced vibration (VIV) of long flexible cylindrical structures (e.g. risers, pipelines, tendons, mooring lines) enduring ocean currents is ubiquitous in the offshore industry. Though significant effort has gone into understanding this complicated fluid–structure interaction problem, major challenges remain in modeling and predicting the response of such structures (for example a riser). The work presented in this paper provides a systematic approach to estimate and analyze the vortex-induced motions of a marine riser. A systematic framework is developed, which allows reconstruction of the riser motion from a limited number of sensors placed along its length. A full reconstruction criterion is developed, which classifies when the measurements from the sensors contain all information pertinent to riser VIV response, and when they do not, in which case additional, analytical methods must be employed. Reconstruction methods for both scenarios are developed and applied to experimental data. Finally, a systematic study on the error during the reconstruction is also undertaken. The methods developed in this paper can be applied to: improve understanding of the vortex shedding mechanisms, including the presence of traveling waves and higher-harmonic forces; develop tools for in-situ estimation of fatigue damage on marine risers; and estimate the vortex-induced forces on marine risers.     

The influence of π-π-stacking on the light-harvesting properties of perylene bisimide antennas that are covalently linked to a [60]fullerene

A flexible organic triad consisting of two perylene bisimide antennas covalently linked to a [60]fullerene by flexible spacers has been synthesized and studied by electrochemistry, steady-state and time-resolved spectroscopy. We found that π-π-stacking of the two antenna subunits has considerable impact on the photophysics of the system and leads to a reduction of the effective light-harvesting efficiency of the assembly. This finding is important for light harvesting in flexible materials based on the dye antenna-fullerene concept.     

Low temperature elastic behaviour of As-Sb-Se and Ge-Sb-Se glasses

The ternary glasses of arsenic and germanium with antimony and selenium can be prepared in large sizes for optical purposes. The elastic behaviour of eight compositions of each glass has been studied down to 4.2 K using a 10 MHz ultrasonic pulse echo interferometer. The glasses have a normal elastic behaviour, with the velocities gradually increasing as the temperature is lowered. An anharmonic solid model of Lakkad satisfactorily explains the temperature variations. The elastic moduli of Ge _x Sb₁₀Se_90?x glasses increase linearly as the Ge content is increased up to 25 at. % and beyond this the increase is nonlinear. (AsSb)₄₀Se₆₀ glasses show a linear increase in elastic moduli with increasing Sb content. The elastic moduli of As _x Sb₁₅Se_85?x glasses exhibit a drastic change near the stoichiometric composition As₂₅Sb₁₅Se₆₀. These behaviours have been qualitatively explained on the basis of the structural changes in glasses.     

Synthesis and properties of novel hole transport materials for electroluminescent devices

We synthesized low molecular weight triphenyldiamines (TPDs), novel 1,3,5-tris(diarylamino)benzenes (TDABs), polymeric triphenyldiamines and insoluble triphenylamine networks based on tris(4-ethynylphenyl)amine as hole transport materials for electroluminescent displays. The HOMO energy values as determined from cyclic voltammetry measurements for TPDs and TDABs are between −4.97 and −5.16 eV. By using a polymeric TPD as hole transport layer and tris(8-quinolinolato) aluminium as emitter, LEDs with an onset voltage of 3V and a luminance up to 900 cd/m² were obtained under ambient conditions.