Studies on pre-hump and main fractions of cellulose-2,5-acetate in acetone

Technical cellulose-2.5-acetates (CA 2.5) were characterized regarding their carbohydrate composition in comparison to the raw material. The association of the CA 2.5 samples in acetone was studied by size exclusion chromatography (SEC) using various acetone grades and styrene divinylbenzene copolymer columns. In HPLC grade acetone with and without addition of 1% water up to three different pre-humps eluted in front of the main fraction of the polymer. The evaluation of the main peak by light scattering measurements resulted in high molar masses indicating that for these technical CA 2.5 samples even the main fraction is not dissolved without association. No pre-humps or association phenomena were observed after addition of 1 ppm LiBr to HPLC grade acetone or with p.a. grade acetone. In addition pre-hump enriched and pre-hump free fractions were isolated by fractionated precipitation. The carbohydrate composition of these fractions was determined and correlated with their association pattern in SEC investigations.     

The first <Emphasis Type="Italic">L</Emphasis><Superscript><Emphasis Type="Italic">p</Emphasis></Superscript>-cohomology of some groups with one end

Let p be a real number greater than one. In this paper we study the vanishing and nonvanishing of the first L ^p -cohomology space of some groups that have one end. We also make a connection between the first L ^p -cohomolgy space and the Floyd boundary of the Cayley graph of a group. We apply the result about Floyd boundaries to show that there exists a real number p such that the first L ^p -cohomology space of a nonelementary hyperbolic group does not vanish. Received: 4 August 2006 Revised: 2 November 2006     

Exciton-related optical nonlinearities in semiconductors and semiconductor microcrystallites

We report on large optical nonlinearities due to specific many-body effects in high-density electron-hole pair systems. On bulk CdS we study the effect of free-carrier screening on the absorption and refraction in the vicinity of the band-gap at room temperature. Steady-state saturable absorption at mW-power levels and four-wave mixing with first-order efficiencies as large as 2% of the incoming light are demonstrated on a 1m slab. On CuBr microcrystallites embedded in glass we investigate the changes of the exciton absorption caused by many-exciton effects both at cryo and room temperature. In contrast to bulk semiconductors, we observe a blue shift of the exciton peak at resonant optical excitation. In addition, strong saturation of absorption with very large contrast shows up. We find Lorentzian saturation intensities in the 100 kW/cm² range.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.     

Upgrading of paper grade pulps to dissolving pulps by nitren extraction: yields,molecular and supramolecular structures of nitren extracted pulps

Different paper grade pulps were extracted with nitren in order to produce dissolving pulps and polymeric xylan. The yield and molecular structure of the extracted pulps were investigated by carbohydrate analysis and HPSEC combined with fluorescence labelling in order to additionally monitor the carbonyl and carboxyl group profiles of the pulps. The supramolecular structure of selected pulps were further studied by solid state ¹³C-CP/MAS-NMR and wide-angle X-ray scattering (WAXS). These supramolecular data of nitren extracted pulps were compared to samples extracted with NaOH and a conventional dissolving pulp in order to classify the properties of nitren extracted pulps. Nitren extraction results in selective xylan removal without noticeable degradation or oxidation of the cellulose fraction. The resulting dissolving pulps have high molar masses, a narrow molar mass distribution and the typical contents of carbonyl and carboxyl groups. The supramolecular structure of cellulose is less affected by nitren compared to strong NaOH, and the resultant dissolving pulps still have the cellulose I structure. All laboratories are members of the European polysaccharide network of excellence EPNOE.     

The layered thiostannate (dienH2)Cu2Sn2S6: a photoconductive inorganic-organic hybrid compound

The new inorganic-organic hybrid compound (dienH2)Cu2Sn2S6 (dien = diethylenetriamine) was synthesized under solvothermal conditions. It crystallizes in the tetragonal space group I4m2 with a = 7.8793(3) A, c = 24.9955(15) A, and V = 1551.80(13) A(3). The structure consists of anionic [Cu2Sn2S6](2-) layers extending in the (001) plane and protonated amine molecules as charge compensating ions sandwiched between the layers. The layered [Cu2Sn2S6](2-) anion is composed of a single layer of edge-sharing CuS4 tetrahedra which is joined above and below to straight chains constructed by corner-sharing SnS4 tetrahedra. The material is a semiconductor with an optical band gap of 1.51 eV. More interestingly, preliminary results demonstrate that the compound exhibits photoconductive properties with an increase of the conductivity by a factor of 3 when irradiated with UV light. Upon heating in an inert atmosphere the compound starts to decompose at about 256 degrees C.