Photophysical studies on binding of curcumin to bovine serum albumins

The excited-state photophysical properties of curcumin in the presence of bovine serum albumin (BSA) have been studied. The absorption and fluorescence changes in curcumin on binding to BSA have been followed at varying concentrations of either curcumin or BSA to determine the binding constant, which has been found to be approximately 10(4) to 10(5) M(-1). Stopped-flow kinetics studies suggested at least two distinct kinetic steps for the binding of curcumin to BSA. The photophysical properties of the singlet-excited state of the curcumin-BSA complex have also been studied. Whereas the absorption spectrum of curcumin is redshifted, the fluorescence spectrum of curcumin was blueshifted in the presence of BSA. The fluorescence quantum yield of curcumin on complexing with BSA was approximately 0.05. Steady-state fluorescence anisotropy studies showed a significant increase in the anisotropy value of 0.37 in BSA-bound curcumin. The fluorescence decay of the curcumin-BSA complex followed a biexponential decay with fluorescence lifetimes of 413 ps (33%) and 120 ps (67%). On the basis of these complementary results, it has been concluded that curcumin shows very high binding to BSA, probably at the hydrophobic cavities inside the protein.     

Polycaprolactone solution–based ink for designing microfluidic channels on paper via 3D printing platform for biosensing application

This work reports a novel fabrication technique for development of channels on paper‐based microfluidic devices using the syringe module of a 3D printing syringe–based system. In this study, printing using polycaprolactone (PCL)‐based ink (Mw 70 000‐90 000) was employed for the generation of functional hydrophobic barriers on Whatman qualitative filter paper grade 1 (approximate thickness of 180 μm and pore diameter of 11 μm), which would effectively channelize fluid flow to multiple assay zones dedicated for different analyte detection on a microfluidic paper‐based analytical device (μPAD). The standardization studies reveal that a functional hydrophilic channel for sample conduction fabricated using the reported technique can be as narrow as 460.7 ± 20 μm and a functional hydrophobic barrier can be of any width with a lower limit of about 982.2 ± 142.75 μm when a minimum number of two layers of the ink is extruded onto paper. A comparison with the hydrodynamic model established for writing with ink is used to explain the width of the line printed by this system. A fluid flow analysis through a single channel system was also carried out to establish its conformity with the Washburn model, which governs the fluid flow in two‐dimensional μPAD. The presented fabrication technique proves to be a robust strategy that effectively taps the advantages of this 3D printing technique in the production of μPADs with enhanced speed and reproducibility.     

Artificial intelligence–based models for the qualitative and quantitative prediction of a phytochemical compound using HPLC method

Isoquercitrin is a flavonoid chemical compound that can be extracted from different plant species such as Mangifera indica (mango), Rheum nobile , Annona squamosal , Camellia sinensis (tea), and coriander ( Coriandrum sativum L.). It possesses various biological activities such as the prevention of thromboembolism and has anticancer, antiinflammatory, and antifatigue activities. Therefore, there is a critical need to elucidate and predict the qualitative and quantitative properties of this phytochemical compound using the high performance liquid chromatography (HPLC) technique. In this paper, three different nonlinear models including artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS), and support vector machine (SVM),in addition to a classical linear model [multilinear regression analysis (MLR)], were used for the prediction of the retention time (tR) and peak area (PA) for isoquercitrin using HPLC. The simulation uses concentration of the standard, composition of the mobile phases (MP-A and MP-B), and pH as the corresponding input variables. The performance efficiency of the models was evaluated using relative mean square error (RMSE), mean square error (MSE), determination coefficient (DC), and correlation coefficient (CC). The obtained results demonstrated that all four models are capable of predicting the qualitative and quantitative properties of the bioactive compound. A predictive comparison of the models showed that M3 had the highest prediction accuracy among the three models. Further evaluation of the results showed that ANFIS–M3 outperformed the other models and serves as the best model for the prediction of PA. On the other hand, ANN–M3proved its merit and emerged as the best model for tR simulation. The overall predictive accuracy of the best models showed them to be reliable tools for both qualitative and quantitative determination.     

Effect of NaCl on the spectral and kinetic properties of cresyl violet (CV)-sodium dodecyl sulphate (SDS) complex

Effect of added NaCl on the spectral and kinetic properties of cationically charged dye (cresyl violet) and anionically charged surfactant (sodium dodecyl sulphate) were studied in the pre-micellar and micellar regions. Addition of 0.2 M NaCl to dye-surfactant solution decreased the critical micellar concentration for the micellization of the dye in sodium dodecyl sulphate to 1.2 × 10⁻³ M. Time-resolved studies using a stopped-flow spectrometer showed that NaCl influences the dynamics of micellisation. Addition of NaCl during the dye-surfactant complex formation converted the complex into micellized form at NaCl concentration of 0.01 to 0.05 M. In contrast, much higher concentration of NaCl (2 M) is required for the salting-out effect of the dye-surfactant complex for conversion to the micellized form     

Synthesis, characterization and structures of 2-(3,5-dimethylpyrazol-1-yl)ethylseleno derivatives and their probable glutathione peroxidase (GPx) like activity

A series of 2-(3,5-dimethylpyrazol-1-yl)ethylseleno derivatives has been synthesized. The glutathione peroxidase like catalytic activity of these compounds has been studied in a model system, in which reduction of hydrogen peroxide with dithiothreitol (DTT(red)), in the presence of an organoselenium compound was investigated by (1)H NMR spectroscopy. All these compounds exhibit GPx like catalytic activities and the catalytic reaction proceeds through a selenoxide intermediate, identified by (77)Se{(1)H} NMR spectroscopy.     

One pot,three component 1,3 dipolar cycloaddition: Regio and diastereoselective synthesis of spiropyrrolidinyl indenoquinoxaline derivatives

A competent and highly discriminating one-pot synthesis of highly diversified novel functionalized indenoquinoxalone grafted spiropyrrolidine linked chromene-3-carbonitrile conjugates accumulating three pharmocophoric cores, heterocyclic indenoquinoxalone, pyrrolidines and chromene-3-carbonitrile in a single molecular framework by means of 1,3-dipolar cycloaddition reaction between indenoquinoxalone, proline/benzyl amine and chromene-3-carbonitrile in ethanol under classical and microwave conditions is described. The three component 1,3-dipolar cycloaddition reaction proceeds via in situ generation of azomethine ylides by the decarboxylative condensation of indenoquinoxalone with proline/benzyl amine and their selectivity towards the endo cyclic double bonds of dipolarophile (chromene-3-carbonitrile) leading to the formation of highly functionalised regio- and diastereoselective molecular hybrids. This methodology exemplifies the green chemistry protocol such as mild reaction conditions, high yields, one-pot procedure and operational simplicity.     

Pulse radiolysis studies on reactions of hydroxyl radicals with selenocystine derivatives

Reactions of hydroxyl radicals (*OH) with selenocystine (SeCys) and two of its analogues, diselenodipropionic acid (SeP) and selenocystamine (SeA), have been studied in aqueous solutions at pHs of 1, 7, and 10 using the pulse radiolysis technique coupled with absorption detection. All of these diselenides react with *OH radicals with rate constants of approximately 10(10) M(-1) s(-1), producing diselenide radical cations ( approximately 1-5 micros after the pulse), with an absorption maximum at 560 nm, by elimination of H(2)O or OH(-) from hydroxyl radical adducts. Assignment of the 560 nm band to the diselenide radical cation was made by comparing the transient spectra with those produced upon reaction of diselenides with specific one-electron oxidants, Cl(2)(*-) (pH 1) and Br(2)(*-) radicals (pHs of 7 and 10). SeP having a carboxylic acid functionality showed quantitative conversion of hydroxyl radical adducts to radical cations. The compounds SeCys and SeA, having an amino functional group, in addition to the radical cations, produced a new transient with lambda(max) at 460 nm, at later time scales ( approximately 20-40 micros after the pulse). The rate and yield of formation of the 460 nm band increased with increasing concentrations of either SeCys or SeA. In analogy with similar studies reported for analogous disulfides, the 460 nm transient absorption band has been assigned to a triselenide radical adduct. The one-electron reduction potentials of the compounds were estimated to be 0.96, 1.3, and 1.6 V versus NHE, respectively, for SeP, SeCys, and SeA at pH 7. From these studies, it has been concluded that the electron-donating carboxylic acid group decreases the reduction potential and facilitates quantitative conversion of hydroxyl radical adducts to radical cations, while the electron-withdrawing NH(3)(+) group not only increases the reduction potential but also leads to fragmentation of the hydroxyl radical adduct to selenyl radicals, which are converted to triselenide radical adducts.     

Kinetic and redox characteristics of phenoxyl radicals of eugenol and isoeugenol: A pulse radiolysis study

The phenoxyl radicals of eugenol (EgOH) and isoeugenol (iEgOH) were generated by the specific one‐electron oxidant N₃^· using pulse radiolysis technique, and were characterized by their absorption spectra, decay and formation kinetics, and one‐electron reduction potential (E₇¹) values. Reactivities of eugenol phenoxyl radical with the biologically important molecule, trolox C (analogue of vitamin E, α‐tocopheral), were determined. Reactions of OH with these phenols were studied at different pHs and suitable mechanisms for these reactions were suggested. Scavenging abilities of the phenols toward highly damaging Br^·, NO₂^·, and CCl₃O₂^· radicals were evaluated. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 17–23, 2000