Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Photocatalysed eosin Y mediated C(sp3)-H alkylation of amine substrates via direct HAT

A visible light promoted, photoredox catalysed, green one-pot approach for the alkylation of amine substrates with sp² carbon has been developed. This eosin Y based organic transformations, can behave as an effective direct hydrogen-atom transfer catalyst for coupling reaction. The proposed strategy includes simple procedure which can make adduct product with sp² carbon. This eosin Y based photocatalytic hydrogen-atom transfer strategy may hold great potential for diverse functionalization of a wide range of native CH bonds in an economical and sustainable manner.     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Mössbauer and PAC studies of nanocrystalline Fe

High-purity Fe powder was mechanically milled under argon at ambient temperature using an SPEX 8000 mill. The local atomic and magnetic structure was studied using⁵⁷Co/Fe Mössbauer and¹¹¹In/Cd perturbed angular correlations (PAC) spectroscopies. After 32 hours of milling, X-ray diffraction revealed effective grain diameters of 18 nm and energy-dispersive X-ray analysis indicated a Cr impurity concentration of 5%, presumably introduced by mechanical attrition of steel ball bearings used for milling. In addition to a spectral component very similar to bulk iron metal, the Mössbauer spectra exhibited hyperfine field shifts attributed to the Cr impurities. PAC spectra on Fe milled for 5 h, with no contamination, exhibited two components: (1) A slightly broadened magnetic interaction attributed to interior, defect-free sites of In/Cd probes with a mean hyperfine field slightly greater than in macroscopic grains. The defect-free site fraction grew appreciably during milling, even though In is essentially insoluble in Fe. (2) An indistinct signal due to mixed magnetic and quadrupole interactions attributed to probes at surface or other defect sites.     

Stereoselective synthesis of (−)-microcarpalide

A highly convergent and efficient synthesis of (−)-microcarpalide, a 10-membered lactone displaying remarkable microfilament disrupting activity is described. Ring-closing metathesis and Sharpless asymmetric dihydroxylations are the key steps. Our strategy highlights the application of novel hydroxy lactone precursors for the stereoselective synthesis of (−)-microcarpalide.     

Novel reactions of phosphorus(III) azides and isocyanates: unusual modes of cycloaddition with dipolarophiles and an unexpected case of ring expansion

New modes of 1,3-dipolar cycloaddition are uncovered by the isolation of [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)N[NP(N3)(OC6H2-6-t-Bu-4-Me)2CH2]N) (3) and [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)C(O)N) (4) on treating [CH2(6-t-Bu-4-Me-C6H2O)2]P-X [X = N3 (1) and NCO (2)] with the dipolarophile MeO2CC identical to CCO2Me; compound 4 undergoes an unprecedented ring expansion upon addition of 2-(methylamino)ethanol to afford the spirocycle [CH2(6-t-Bu-4-Me-C6H2O)2]P(OCH2CH2N(Me)CH(CO2Me)CH(CO2Me)C(O)N) (5).     

Chemical transformations of 3‐amino‐2‐quinolones

In order to find new antimalarial drugs, an exploration about the chemical properties of the starting compounds 3‐amino‐6‐chloro‐4‐phenyl‐1H‐quinolin‐2‐one ( 1 ) and 3‐amino‐4‐methyl‐1H‐quinolin‐2‐one ( 2 ) was developed. Acylation with acyl chloride, sulfonyl chloride and acetic anhydride were carried out. Despite a previous report [2], when acetyl chloride or acetic anhydride were assayed on 1 , only the diacetyl derivative 7 was obtained. When this compound was heated at reflux temperature in a mixture of acetic acid and acetic anhydride, it was transformed in the oxazoloquinoline 8 . Further reactions of the acyl derivatives with diazomethane afforded 1‐methylated compounds. Compound 2 gave the imine 16 by condensation with 4‐nitrobenzaldehyde.     

Stabilisation of [Fe2(CO)9] and [Ru2(CO)9] bu substitution with bridging diphosphorus ligands

Reaction of [Fe₂(CO)₉] with a half molar amount of R₂PYPR₂ (Y = CH₂, R = Ph, Me, OMe or OPrⁱ; Y = N(Et), R = OPh, OMe or OCH₂; Y = N(Me), R = OPrⁱ or OEt) leads to the ready formation of a product which on irradiation with ultraviolet light rapidly decarbonylates to the heptacarbonyl derivative [Fe₂(μ-CO)(CO)₆{μ-R₂PYPR₂}]. Treatment of the latter with a slight excess of the appropriate ligand results, under photochemical conditions, in the formation of the dinuclear pentacarbonyl complex [Fe₂(μ-CO)(C))₄{μ-R₂PYPR₂}₂] but under thermal conditions in the formation of the mononuclear species [Fe(CO)₃{R₂PYPR₂}]. Reaction of [Ru₃(CO)₁₂] with an equimolar amount of (RO)₂PN(R′)P(OR)₂ (R′ = Me, R = Prⁱ or Et; R′ = Et, R = Ph or Me) under either thermal or photochemical conditions produces [Ru₃(CO)₁₀{μ-(RO)₂PN(OR)₂}] which reacts further with excess (RO)₂PN(R′)P(OR)₂ on irradiation with ultraviolet light to afford the dinuclear compound [Ru₂(μ-CO)(CO₄{μ-(RO)₂PN(R′)P(OR)₂}₂]. The molecular structure of [Ru₂(μ-CO)(CO)₄{μ-(MeO)₂PN(Et)P(OMe)₂}₂], which has been determined by X-ray crystallography, is described.     

Solid phase extractive preconcentration of uranium(VI) using quinoline-8-ol anchored chloromethylated polymeric resin beads

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with quinoline-8-ol (HQ). The modified polymeric resin was characterized by FT-IR spectroscopy and elemental analysis. The HQ anchored resin showed superior binding affinity for U(VI) over Th(IV) and La(III). The influence of various physicochemical parameters on the recovery of U(VI) were optimized by both static and dynamic methods. The phase exchange kinetic studies performed for U(VI) revealed that <5 min was sufficient for reaching equilibrium metal ion sorption. The maximum sorption capacity of HQ anchored resin for U(VI) was found to be 120.30 mg g⁻¹ of resin which is higher than other solid phase extraction sorbents reported so far excepting N,N-dibutyl, N′-benzoyl thiourea sorbed Amberlite XAD-16. The developed HQ anchored polymeric resin is highly selective as none of the extraneous species were found to have any deleterious effect. Solid phase extraction (SPE) studies performed using HQ anchored polymeric resin offered enrichment factor of 100 and the lowest concentration below which recoveries become non-quantitative is 5 μg l⁻¹. The accuracy of the developed SPE method in conjunction with Arsenazo III procedure was tested by analyzing marine sediment (MESS-3) and soil (IAEA–Soil 7) reference materials. Furthermore, the above procedure has been successfully employed for the analysis of real soil and sediment samples.