The role of urea in Cu–Zn–Al catalysts for methanol steam reforming

Abstract  

Impregnated Cu–Zn over Al₂O₃ exhibits high activity with the use of a lower amount of active metal relative to conventional co-precipitation catalysts. The activity of the catalyst could be enhanced by addition of urea to the metal salt solution during impregnation. The H₂ yield from Cu–Zn catalysts with urea is 42%, while the H₂ yield from catalyst without urea is only 28% in a continuous system at 250 °C and 1.2 atm. The H₂ yield of the catalyst with urea in this study could compete with that of commercial catalysts. The role of urea in the Cu–Zn catalysts was investigated. X-ray diffraction (XRD) analysis of the catalysts shows that the crystal size of CuO could be reduced by the addition of urea. The XRD diffractogram of the catalyst prior to calcination also shows the formation of NH₄NO₃, which could aid in dissociation of metal clusters. Scanning electron microscopy (SEM) images of catalysts show the size of Cu–Zn compound clusters and also their dispersion over the Al₂O₃ surface on the impregnated catalysts. The addition of urea could also yield smaller Cu–Zn compound clusters and better dispersion compared with the impregnated catalyst without urea. Such impregnated Cu–Zn catalysts with urea could be alternative novel catalysts for methanol steam reforming.     

A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.     

Improved rapid assay of plasma uric acid by short-end injection capillary zone electrophoresis

A rapid and simple short-end injection capillary zone electrophoresis method was developed for the quantification of plasma uric acid. The separation was performed in an uncoated fused-silica capillary (50 μm ID, 60 cm total length, 10.2 cm effective length) by using as a background electrolyte a 75 mmol/L glycylglycine solution titrated with NaOH 5 mol/L to pH 9.0, a voltage of 28 kV, a cartridge temperature of 15 °C, and direct UV detection at 292 nm. Under optimized conditions, uric acid was determinate in little more than 1 min (1.076 minutes). In order to verify the accuracy of the analysis, urate levels were measured in 543 apparently healthy volunteers by the new assay and our previous method, and the obtained data were compared by Passing–Bablock regression, Bland–Altman test, and a new regression-based approach, which showed a good agreement between two methods.     

Five-membered ring analogues of shikimic acid

Shikimate and other intermediates of the shikimate-chorismate pathway are densely functionalized structures that seem to offer limited options for skeletal modification. We designed and synthesized cyclopentylidenes 1 and 2, as well as cyclopentenes 3 and 4, as novel ring-contracted analogues of shikimic acid. Enzymatic studies showed that analogues 1-3 are indeed processed by shikimate kinase to give phosphates 1-P, 2-P, and 3-P as five-membered ring analogues of shikimate-3-phosphate. In particular, analogue 1 is converted by the enzyme at a rate only 3.5-fold slower than that of the native substrate, while analogue 3 binds to shikimate kinase with an apparent Km of 1.7 mM, compared to 0.14 mM for shikimate.     

Enantiomeric reversed-phase high-performance liquid chromatography resolution of D-/L-penicillamine after spirocyclization with ninhydrin and by using copper(II)-L-proline complex as a chiral selector in the mobile phase

A new HPLC method by fluorescence or UV/vis absorbance detection has been developed for the separation and quantification of penicillamine stereoisomers after their spirocyclization with ninhydrin. The separation was performed on an achiral C18 column by isocratic elution with a copper(II)-l-proline complex as a chiral selector in the mobile phase. The method was able to detect traces of l-penicillamine in samples of d-penicillamine below 0.1% in fairly short times (about 16min) with a good resolution (R(s)=1.31). On the whole, the method was found to be stable and useful in the quality control of the bulk material and formulations.     

Binding of VIVO2+, VIVOL,VIVOL2 and VVO2L Moieties to Proteins: X-ray/Theoretical Characterization and Biological Implications

Vanadium compounds have frequently been proposed as therapeutics, but their application has been hampered by the lack of information on the different V-containing species that may form and how these interact with blood and cell proteins, and with enzymes. Herein, we report several resolved crystal structures of lysozyme with bound V^IVO²⁺ and V^IVOL²⁺, where L=2,2’-bipyridine or 1,10-phenanthroline (phen), and of trypsin with V^IVO(picolinato)₂ and V^VO₂(phen)⁺ moieties. Computational studies complete the refinement and shed light on the relevant role of hydrophobic interactions, hydrogen bonds, and microsolvation in stabilizating the structure. Noteworthy is that the trypsin−V^VO₂(phen) and trypsin−V^IVO(OH)(phen) adducts correspond to similar energies, thus suggesting a possible interconversion under physiological/biological conditions. The obtained data support the relevance of hydrolysis of V^IV and V^V complexes in the several types of binding established with proteins and the formation of different adducts that might contribute to their pharmacological action, and significantly widen our knowledge of vanadium–protein interactions.     

Ultra‐fast adenosine 5′‐triphosphate,adenosine 5′‐diphosphate and adenosine 5′‐monophosphate detection by pressure‐assisted capillary electrophoresis UV detection

Herein, we report a new CE method to measure adenine nucleotides adenosine 5′‐triphosphate, adenosine 5′‐diphosphate, and adenosine 5′‐monophosphate in red blood cells. For this purpose, 20 mmol/L sodium acetate buffer at pH 3.80 was used as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of 25 kV and an overimposed pressure of 0.2 psi from inlet to outlet. A rapid separation of these analytes in less than 1.5 min was obtained with a good reproducibility for intra‐ and inter‐assay (CV<4 and 8%, respectively) and an excellent analytical recovery (from 98.3 to 99%). The applicability of our method was proved by measuring adenine nucleotides in red blood cells.     

Molecular Dynamic Simulation Analysis on the Inclusion Complexation of Plumbagin with β-Cyclodextrin Derivatives in Aqueous Solution

Stable encapsulation of medically active compounds can lead to longer storage life and facilitate the slow-release mechanism. In this work, the dynamic and molecular interactions between plumbagin molecule with β-cyclodextrin (BCD) and its two derivatives, which are dimethyl-β-cyclodextrin (MBCD), and 2-O-monohydroxypropyl-β-cyclodextrin (HPBCD) were investigated. Molecular dynamics simulations (MD) with GLYCAM-06 and AMBER force fields were used to simulate the inclusion complex systems under storage temperature (4 °C) in an aqueous solution. The simulation results suggested that HPBCD is the best encapsulation agent to produce stable host–guest binding with plumbagin. Moreover, the observation of the plumbagin dynamic inside the binding cavity revealed that it tends to orient the methyl group toward the wider rim of HPBCD. Therefore, HPBCD is a decent candidate for the preservation of plumbagin with a promising longer storage life and presents the opportunity to facilitate the slow-release mechanism.