Ultrasonic-Assisted Nebulization Extraction Coupled with SPE and HPLC for the Determination of Triterpenoids in Root of Euphorbia pekinensis Rupr.

In this work, a novel method based on ultrasonic-assisted nebulization extraction coupled with solid phase extraction (UANE-SPE) and determined by high performance liquid chromatography was developed for the determination of triterpenoids in root of Euphorbia pekinensis Rupr. The experimental conditions for the UANE-SPE, such as type of extraction solvent, sample amount, type and amount of sorbent, extraction time and volume of the elution solvent, were examined and optimized. The method was successfully applied to determine euphol and tirucallol in the dried root of E. pekinensis Rupr. The recoveries of the analytes were in the range of 89.1–102.0 %. The limits of detection were 12 μg g^?1 for tirucallol and 10 μg g^?1 for euphol. The extraction yields obtained by the proposed method are higher than those obtained by the conventional extraction methods, such as reflux and ultrasonic-assisted extraction. Compared with the traditional methods, the proposed method can reduce the consumption of the labor, shorten the sample preparation time and increase the efficiencies in the extraction of active constituents from plant materials.     

Hierarchically Designed Three‐Dimensional Macro/Mesoporous Carbon Frameworks for Advanced Electrochemical Capacitance Storage

Mesoporous carbon (m‐C) has potential applications as porous electrodes for electrochemical energy storage, but its applications have been severely limited by the inherent fragility and low electrical conductivity. A rational strategy is presented to construct m‐C into hierarchical porous structures with high flexibility by using a carbon nanotube (CNT) sponge as a three‐dimensional template, and grafting Pt nanoparticles at the m‐C surface. This method involves several controllable steps including solution deposition of a mesoporous silica (m‐SiO₂) layer onto CNTs, chemical vapor deposition of acetylene, and etching of m‐SiO₂, resulting in a CNT@m‐C core–shell or a CNT@m‐C@Pt core–shell hybrid structure after Pt adsorption. The underlying CNT network provides a robust yet flexible support and a high electrical conductivity, whereas the m‐C provides large surface area, and the Pt nanoparticles improves interfacial electron and ion diffusion. Consequently, specific capacitances of 203 and 311 F g^?1 have been achieved in these CNT@m‐C and CNT@m‐C@Pt sponges as supercapacitor electrodes, respectively, which can retain 96 % of original capacitance under large degree compression.     

液相色谱-串联质谱法测定海参和海胆中的单唾液酸神经节苷脂

建立了液相色谱-四极杆串联质谱法定量检测海参和海胆中单唾液酸神经节苷脂的分析方法。采用Svennerholm法从海胆或海参样品中提取神经节苷脂,经C8固相萃取柱净化,采用APS-2 NH₂柱(150 mm×2.1 mm, 3 μm),以乙腈和50 mmol/L乙酸铵溶液(pH 5.6)为流动相,梯度洗脱。样品中每种成分的定量在多反应监测模式下进行。该方法具有极高的灵敏度,定量限可低至纳克级。非硫酸酯化单唾液酸神经节苷脂(NMG)和硫酸酯化单唾液酸神经节苷脂(SMG)在1～40 ng进样量范围内呈现良好的线性关系;定量结果显示所测海参样品中美国红参的NMG含量最高,海胆样品中紫海胆的SMG含量最高;海胆中总的单唾液酸神经节苷脂含量(4.30～6.40 mg/g)明显高于各海参样品(8～131 μg/g)。该方法稳定可靠,适合海胆和海参中微量单唾液酸神经节苷脂的定量分析。     

Ultrasonic-Assisted Nebulization Extraction Coupled with SPE and HPLC for the Determination of Triterpenoids in Root of Euphorbia pekinensis Rupr.

In this work, a novel method based on ultrasonic-assisted nebulization extraction coupled with solid phase extraction (UANE-SPE) and determined by high performance liquid chromatography was developed for the determination of triterpenoids in root of Euphorbia pekinensis Rupr. The experimental conditions for the UANE-SPE, such as type of extraction solvent, sample amount, type and amount of sorbent, extraction time and volume of the elution solvent, were examined and optimized. The method was successfully applied to determine euphol and tirucallol in the dried root of E. pekinensis Rupr. The recoveries of the analytes were in the range of 89.1–102.0 %. The limits of detection were 12 μg g⁻¹ for tirucallol and 10 μg g⁻¹ for euphol. The extraction yields obtained by the proposed method are higher than those obtained by the conventional extraction methods, such as reflux and ultrasonic-assisted extraction. Compared with the traditional methods, the proposed method can reduce the consumption of the labor, shorten the sample preparation time and increase the efficiencies in the extraction of active constituents from plant materials.

     

Influence of the upper waveguide layer thickness on optical field in asymmetric heterostructure quantum well laser diode

<正>Asymmetric broad-waveguide separate-confinement heterostructure(BW-SCH) quantum well(QW) laser diode emitting at 808 nm is analyzed and designed theoretically.The dependence of the optical field distribution, vertical far-field angle,and internal loss on different thicknesses of the upper waveguide layer is calculated and analyzed.Calculated results show that when the thicknesses of the lower and upper waveguide layers are 0.45 and 0.3μm,respectively,for the devices with 100-μm-wide stripe and 1000-μm-long cavity,an output power of 7.6 W at 8 A,a vertical far-field angle of 37°,a slope efficiency of 1.32 W/A, and a threshold current of 189 mA can be obtained.     

Wire-supported CdSe nanowire array photoelectrochemical solar cells

Previous fiber-shaped solar cells are based on polymeric materials or dye-sensitized wide band-gap oxides. Here, we show that efficient fiber solar cells can be made from semiconducting nanostructures (e.g. CdSe) with smaller band-gap as the light absorption material. We directly grow a vertical array of CdSe nanowires uniformly around a core metal wire and make the device by covering the top of nanowires with a carbon nanotube (CNT) film as the porous transparent electrode. The CdSe-CNT fiber solar cells show power conversion efficiencies of 1-2% under AM 1.5 illumination after the nanowires are infiltrated with redox electrolyte. We do not use a secondary metal wire (e.g. Pt) as in conventional fiber-shaped devices, instead, the end part of the CNT film is condensed into a conductive yarn to serve as the secondary electrode. In addition, our CdSe nanowire-based photoelectrochemical fiber solar cells maintain good flexibility and stable performance upon rotation and bending to large angles.     

Strong and reversible modulation of carbon nanotube-silicon heterojunction solar cells by an interfacial oxide layer

Deposition of nanostructures such as carbon nanotubes on Si wafers to make heterojunction structures is a promising route toward high efficiency solar cells with reduced cost. Here, we show a significant enhancement in the cell characteristics and power conversion efficiency by growing a silicon oxide layer at the interface between the nanotube film and Si substrate. The cell efficiency increases steadily from 0.5% without interfacial oxide to 8.8% with an optimal oxide thickness of about 1 nm. This systematic study reveals that formation of an oxide layer switches charge transport from thermionic emission to a mixture of thermionic emission and tunneling and improves overall diode properties, which are critical factors for tailoring the cell behavior. By controlled formation and removal of interfacial oxide, we demonstrate oscillation of the cell parameters between two extreme states, where the cell efficiency can be reversibly altered by a factor of 500. Our results suggest that the oxide layer plays an important role in Si-based photovoltaics, and it might be utilized to tune the cell performance in various nanostructure-Si heterojunction structures.     

High-efficiency core–shell solar cell array from Si wafer

High-efficiency micro core–shell solar cell (μ-CSSC) arrays are fabricated from Si wafer by using traditional lithography and phosphorus diffusion. The p–n junction depth is around 450 nm, indicating that it forms core–shell structure in micropillars by using phosphorus diffusion. The μ-CSSC arrays have high minority carrier lifetime of 23 μs and long diffusion length of ～150 μm. The best power efficiency of the μ-CSSC reaches to 9.2%. It is a convenient method for fabricating Si μ-CSSC arrays in wafer scale for future applications.     

MOCVD growth of A1GaInP/GaInP quantum well laser diode with asymmetric cladding structure for high power applications

In order to improve the characteristics of the general broad-waveguide 808-nm semiconductor laser diode （LD）, we design a new type quantum well LD with an asymmetric cladding structure. The structure is grown by metal organic chemical vapor deposition （MOCVD）. For the devices with 100-ttm-wide stripe and 1000-/zm-long cavity under continuous-wave （CW） operation condition, the typical threshold current is 190 mA, the slope efficiency is 1.31 W/A, the wall-plug efficiency reaches 63%, and the maximum output power reaches higher than 7 W. And the internal absorption value decreases to 1.5 cm^-1.     

MOCVD growth of AlGaInP/GaInP quantum well laser diode with asymmetric cladding structure for high power applications

In order to improve the characteristics of the general broad-waveguide 808-nm semiconductor laser diode (LD),we design a new type quantum well LD with an asymmetric cladding structure.The structure is grown by metal organic chemical vapor deposition (MOCVD).For the devices with 100-μm-wide stripe and 1000-μm-long cavity under continuous-wave (CW) operation condition,the typical threshold current is 190 mA,the slope efficiency is 1.31 W/A,the wall-plug efficiency reaches 63%,and the maximum output power reac...