Photoreflectance investigations of AlGaN/GaN heterostructures with a two dimensional electron gas

Undoped AlGaN/GaN heterostructures with different content and thickness of AlGaN layer are investigated by photoreflectance (PR) spectroscopy. We have observed PR resonances related to an absorption in both GaN and AlGaN layers. The character of these resonances has been analyzed, and PR lines associated with excitonic and band-to-band absorption in the GaN layer and band-to-band absorption in the AlGaN layer have been identified. The transition related to band-to-band absorption possesses characteristic Franz–Keldysh oscillations (FKOs) associated with a built-in electric field. The electric field in the AlGaN layer obtained on the basis of the analysis of FKOs has been found to be in the range of 244–341 kV/cm. The value of the field has been found to decrease with the increase in AlGaN thickness and to increase with the increase in Al concentration. The surface potential for AlGaN layers has been found to increase with the increase in Al mole fraction and has been estimated to be in the range of 1.0–1.7 eV.     

Electrical conductivity of poly(ethylene terephthalate)/expanded graphite nanocomposites prepared by in situ polymerization

Nanocomposites based on poly(ethylene terephthalate) (PET) and expanded graphite (EG) have been prepared by in situ polymerization. Morphology of the nanocomposites has been examined by electronic microscopy. The relationship between the preparation method, morphology, and electrical conductivity was studied. Electronic microscopy images reveal that the nanocomposites exhibit well dispersed graphene platelets. The incorporation of EG to the PET results in a sharp insulator‐to‐conductor transition with a percolation threshold (?_c) as low as 0.05 wt %. An electrical conductivity of 10^?3 S/cm was achieved for 0.4 wt % of EG. The low percolation threshold and relatively high electrical conductivity are attributed to the high aspect ratio, large surface area, and uniform dispersion of the EG sheets in PET matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

The new method of fabrication of submicron structures by optical lithography with mask shifting and mask rotation

This paper presents the methods of fabricating narrow parallel submicrometric stripes in silicon dioxide and a resist layer. The experiments were conducted by two techniques: double patterning lithography and double exposure lithography. In addition to the above mentioned processes, mask translation was applied. For all conducted experiments, chrome masks and a 405 nm line of the high pressure mercury lamp of an MA-56 Mask Aligner System were used. The main aim of the performed tests was to establish the utility and the possible applications of the methods used.     

Elastic scattering of acoustic phonons on point mass defects

The problem of eigenvalues of the collision operator for a gas of acoustic phonons scattered by point mass defects of small concentration embedded in transversely isotropic media is considered. For this purpose the properties of solution of the Boltzmann-Peierls kinetic equation for spatially homogeneous states are studied. An analytic formula for the Laplace transform of the distribution function is obtained. The singularities of this Laplace transform and the initial distribution function determine the dependence of this distribution function on time. For several hexagonal materials characteristics of the singularity set are calculated. Usually the singularity set consists of a continuous part and four discrete points. However, there exist elastic hexagonal materials (⁴He, Cd, Ta, Zn) for which some of discrete points are absent. For some materials (e.g. Zr) the continuous part is very narrow.     

Reverse engineering of Al<Subscript>x</Subscript>Ga<Subscript>1−x</Subscript>As/GaAs structures composition by reflectance spectroscopy

The paper presents the application of non-modulation reflectance method for composition profiling of epitaxial Al_xGa_−xAs/GaAs structures. This non-destructive method is based on spectral measurements and theoretical reflectance spectrum matching. This is a very accurate and sensitive method of determining the Al composition in Al_xGa_1−xAs layers and structures with resolution down to 1 nm. In this work, the authors describe theoretic principles of this method and present experimental results of characterization of different AlGaAs structures to prove the potential of the worked out method.     

Synthesis of O-[4,6-Di-O-Acetyl-4-O-(2,3,4,6-Tetra-O-Acetyl-β-D-Galactopyranosyl)-2-Deoxy-2-Hydroxyimino-D-Arabino-Hexopyranosyl]-N-Benzyloxycarbonyl-L-Serine Methyl Esters And Their Transformations

ABSTRACT

3,6-Di-O-acetyl-4-O-(2,3,4,6-tetra-O-acetyl-β-D-galactopyranosyl)-2-deoxy-2-hydroxyimino-α- and -β-D-arabino-hexopyranosides of N-benzyloxycarbonyl-L-serine methyl ester as well as of ethanol have been synthesised from D-lactal hexaacetate via nitrosyl chloride, followed by condensation with L-serine derivatives and ethanol, respectively. The compounds of L-serine thus obtained were modified at C-2 and C-3 to afford L-serine derivatives attached to disaccharides containing terminal α-D-gluco-, 2-acetamido-α-D-gluco-, β-D-manno, 2-acetamido-β-D-manno-pyranosyl, 3-azido-2-hydroxyimino-α-D-arabino-, and α-D-ribo-hexopyranosyl residues.     

Determination of catechin and epicatechin in the peel of apple varieties resistant and non-resistant to apple scab

Catechin and epicatechin were analysed in the peel of six apple cultivars (three resistant and three non-resistant to apple scab). Two methods of analytical sample preparation following extraction were tested: solid phase extraction and column separation with Sephadex LH-20 coupled to a differential refractometric detector. Prior to GC and GC-MS analyses, these compounds were silylized. This permitted co-injection with standards and the comparison of retention values and mass spectra with those recorded for standards. The content of catechin and epicatechin in apple peel is discussed in relation to the resistance of apple trees to scab.     

Strange products of projections

Let H be an infinite-dimensional Hilbert space. We show that there exist three orthogonal projections X ₁,X ₂,X ₃ onto closed subspaces of H such that for every 0 ≠ z ₀ ∈ H there exist k ₁, k ₂, · · · ∈ {1, 2, 3} so that the sequence of iterates defined by z _n = X _kn z _n ?1 does not converge in norm.     

Characterization of calcium phosphate coatings doped with Mg, deposited by pulsed laser deposition technique using ArF excimer laser

Calcium phosphate layers were deposited on Ti6Al4V substrates with TiN buffer layers by use of pulsed laser deposition method. With this technique three pressed pellets consisted of tricalcium phosphate (TCP, Ca(3)(PO(4))(2)), hydroxyapatite (HA, Ca(10)(PO(4))(6)(OH)(2)) and hydroxyapatite-doped with magnesium (HA with 4% of Mg and trace amount of (Ca,Mg)(3)(PO(4))(2)) were ablated using ArF excimer laser (lambda=193 nm). The using of different targets enabled to determine the influence of target composition on the nature of deposited layers. The obtained deposits were characterized by means of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction method (XRD). The obtained Fourier spectras revealed differences in terms of intensity of spectral bands of different layers. The analysis from XRD showed that Mg-doped HA layer has crystalline structure and TCP and HA layers composition is characterized by amorphous nature.