Mesoscopic Modeling of Capillarity-Induced Two-Phase Transport in a Microfluidic Porous Structure

Mesoscopic modeling at the pore scale offers great promise in exploring the underlying structure transport performance of flow through porous media. The present work studies the fluid flow subjected to capillarity-induced resonance in porous media characterized by different porous structure and wettability. The effects of porosity and wettability on the displacement behavior of the fluid flow through porous media are discussed. The results are presented in the form of temporal evolution of percentage saturation and displacement of the fluid front through porous media. The present study reveals that the vibration in the form of acoustic excitation could be significant in the mobilization of fluid through the porous media. The dependence of displacement of the fluid on physicochemical parameters like wettability of the surface, frequency along with the porosity is analyzed. It was observed that the mean displacement of the fluid is more in the case of invading fluid with wetting phase where the driving force strength is not so dominant.     

Self‐Assembly and Gelation of Poly(aryl ether) Dendrons Containing Hydrazide Units: Factors Controlling the Formation of Helical Structures

Self‐assembly of AB₂ and AB₃ type low molecular weight poly(aryl ether) dendrons that contain hydrazide units were used to investigate mechanistic aspects of helical structure formation during self‐assembly. The results suggest that there are three important aspects that control helical structure formation in such systems with acyl hydrazide/hydrazone linkage: i) J‐type aggregation, ii) the hydrogen‐bond donor/acceptor ability of the solvent, and iii) the dielectric constant of the solvent. The monomer units self‐assemble to form dimer structures through hydrogen‐bonding and further assembly of the hydrogen‐bonded dimers leads to macroscopic chirality in the present case. Dimer formation was confirmed by NMR spectroscopy and by mass spectrometry. The self‐assembly in the system was driven by hydrogen‐bonding and π–π stacking interactions. The morphology of the aggregates formed was examined by scanning electron microscopy, and the analysis suggests that aprotic solvent systems facilitate helical fibre formation, whereas introduction of protic solvents results in the formation of flat ribbons. This detailed mechanistic study suggests that the self‐assembly follows a nucleation–elongation model to form helical structures, rather than the isodesmic model.     

A Continuous Transition Between Quantum and Classical Mechanics. II

Examples are worked out using a new equation proposed in the previous paper to show that it has new physical predictions for mesoscopic systems.     

Equivariant Spectral Triples on the Quantum SU(2) Group

We characterize all equivariant odd spectral triples for the quantum SU(2) group acting on its L ₂-space and having a nontrivial Chern character. It is shown that the dimension of an equivariant spectral triple is at least three, and given any element of the K-homology group of SU_q(2), there is an equivariant odd spectral triple of dimension 3 inducing that element. The method employed to get equivariant spectral triples in the quantum case is then used for classical SU(2), and we prove that for p < 4, there does not exist any equivariant spectral triple with nontrivial K-homology class and dimension p acting on the L ₂-space.The first author would like to acknowledge support from the National Board of Higher Mathematics, India.     

High-performance liquid chromatographic detection of hydroxylated benzoic acids as an indirect measure of hydroxyl radical in heart: its possible link with the myocardial reperfusion injury.

The present report describes a method suitable for the indirect assay of hydroxyl radical (OH.), which is likely to be produced during reperfusion of ischemic myocardium. Isolated rat heart perfused by the Langendorff technique was subjected to 30 min of ischemia, followed by 30 min of reperfusion. Salicylic acid (2 mM) was added to the perfusion circuit to trap any OH. radical generated during the experiment. 2,5- and 2,3-dihydroxybenzoic acids (hydroxylated products of salicylic acid) were identified by authentic standards as well as by pure OH.-generating system using high-performance liquid chromatography with electrochemical detection. In addition to serving as a chemical trap for the detection of OH., salicylate attenuated myocardial reperfusion injury as evidenced by reduced formation of creatine kinase, decreased lipid peroxidation, and improved myocardial contractile functions during reperfusion. These results thus provide direct evidence for the presence of OH. in heart and link it to the myocardial reperfusion injury.     

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt₄L₂(1a) and Pt₈L₂(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt₈L₂(3a) metallacage. PF₆⁻ analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b–3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

Synthesis of Pt(ii) based metallacages as aggregation induced emissive supramolecular architectures for fabricating artificial light harvesting systems for cross coupling cyclization under visible light is achieved.     

A Two‐Dimensional Coordination Compound as a Zinc Ion Selective Luminescent Probe for Biological Applications

A 2D coordination compound {[Cu₂(HL)(N₃)]?ClO₄}_∞ ( 1 ; H₃L=2,6‐bis(hydroxyethyliminoethyl)‐4‐methyl phenol) was synthesized and characterized by single‐crystal X‐ray diffraction to be a polymer in the crystalline state. Each [Cu₂(HL)(N₃)]⁺ species is connected to its adjacent unit by a bridging alkoxide oxygen atom of the ligand to form a helical propagation along the crystallographic a axis. The adjacent helical frameworks are connected by a ligand alcoholic oxygen atom along the crystallographic b axis to produce pleated 2D sheets. In solution, 1 dissociates into [Cu₂(HL)₂(H₃L)]?2H₂O ( 2 ); the monomer displays high selectivity for Zn²⁺ and can be used in HEPES buffer (pH 7.4) as a zinc ion selective luminescent probe for biological application. The system shows a nearly 19‐fold Zn²⁺‐selective chelation‐enhanced fluorescence response in the working buffer. Application of 2 to cultured living cells (B16F10 mouse melanoma and A375 human melanoma) and rat hippocampal slices was also studied by fluorescence microscopy.     

Catalytic enantioselective indium-mediated allylation of hydrazones

[reaction: see text] A facile and highly selective indium-mediated allylation of hydrazones utilizing BINOL ligands is described. Chiral (R)-3,3'-bistrifluoromethylBINOL afforded homoallylic amines in up to 97% ee with stoichiometric ligand. Employing only 10 mol % ligand afforded selectivity of up to 92% ee.     

Photopolymerization of methyl methacrylate with the use of bromine as photoinitiator

Low concentrations of bromine (0.008–0.06M) were used to initiate photopolymerization of MMA in bulk and in diluted (near bulk) systems, the diluents or solvents used being benzene, toluene, dioxane, tetrahydrofuran, carbon tetrachloride, chloroform, methylene chloride, and methanol. Polymerization in bulk follows usual free-radical kinetics. Inert solvents (benzene, toluene) as well as the other solvents used enhance the rate of polymerization MMA even when used in the range of catalytic concentrations (0.04–0.4M). An initiation mechanism involving solvent molecules appears to be predominant in diluted systems.     

Oxygen atom transfer reactivity from a dioxo-Mo(VI) complex to tertiary phosphines: synthesis, characterization, and structure of phosphoryl intermediate complexes

The oxygen atom transfer (OAT) reactivity of TpMoO2Cl with PMe3, PEt3, and PPhMe2 (where Tp = hydrotris(3,5-dimethylpyrazol-1-yl)borate) has been investigated. The OAT reactions proceed through a diamagnetic Mo(IV) phosphoryl intermediate complex of general formula TpMoOCl(OPR3) (OPR3 = OPMe3, OPEt3, OPPhMe2), which have been isolated and characterized by 1H and 31P NMR, UV-visible, and infrared spectroscopies and electrospray ionization mass spectrometry. Solid-state crystal structures of TpMoOCl(OPMe3) and TpMoOCl(OPPhMe2) are also reported, the oxygen-to-phosphorus distances agree with a double-bond formulation and a single bond between the metal and the phosphoryl oxygen atom. The stability of the phosphoryl intermediate complexes depends on the steric properties of the coordinated phosphine-oxides. These intermediate complexes have been converted to solvent-coordinated species, TpMoOCl(solv) (solv = acetonitrile or dmf), and the coordinated solvents exchange with the bulk solvent.