Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Anomalous thermopower in the metalliclike phase of a 2D hole system

We report very low temperature ( T) thermopower and resistivity ( rho) measurements on variable-density, two-dimensional hole systems confined to GaAs quantum wells. As the hole density is lowered from 1.49x10(11) cm(-2) to 0.14x10(11) cm(-2), the system crosses from an insulating ( drho / dT less, similar0) to a metallic regime ( drho / dT>0) and finally displays insulating behavior ( drho / dT<0). Diffusion thermopower shows a striking sign reversal in a narrow range of density in the metallic regime, suggesting a qualitative change in the conduction or the scattering mechanism.     

A study into the effect of subtle structural details and disorder on the terahertz spectrum of crystalline benzoic acid

The phonon modes of crystalline benzoic acid have been investigated using terahertz time-domain spectroscopy, rigid molecule atom-atom model potential and plane-wave density functional theory lattice dynamics calculations. The simulation results show good agreement with the measured terahertz spectra and an assignment of the terahertz absorption features of benzoic acid is made with the help of both computational methods. Focussing on the strongest interactions in the crystal, we describe each vibration in terms of distortions of the benzoic acid hydrogen bonded dimers that are present in the crystal structure. The terahertz spectrum is also shown to be highly sensitive to the location of the carboxylic acid hydrogen atoms in the cyclic hydrogen-bonded dimers and we have systematically explored the influence of the observed disorder in the hydrogen atom positions on the lattice dynamics.     

Prisoner's dilemma and clusters on small‐world networks

The structure of interaction plays an important role in the outcome of evolutionary games. This study investigates the evolution of stochastic strategies of the prisoner's dilemma played on structures ranging from lattices to small world networks. Strategies and payoffs are analyzed as a function of the network characteristics of the node they are playing on. Nodes with lattice‐like neighborhoods tend to perform better than the nodes modified during the rewiring process of the construction of the small‐world network. © 2007 Wiley Periodicals, Inc. Complexity 12:22–36, 2006     

Salicylaldehyde based oxazolidines as catalysts for the asymmetric addition of diethylzinc to aldehydes

A series of oxazolidines have been prepared by condensation of N‐isopropyl norephedrine with a variety of salicylaldehyde derivatives. Despite the stereochemical relationship of (1R,2S)‐norephedrine with (1R,2S)‐ephedrine, the resultant oxazolidines 12‐14 were determined to have a stronger stereochemical relationship with (1S,2S)‐pseudoephedrine based oxazolidines. The resultant oxazolidines were used as catalytic ligands in the addition of diethylzinc to several aldehydes. It was determined that the oxazolidine derivative 12 gave the highest yield and a moderate enantioselectivity.     

A monopole mass filter with a hyperbolic V-shaped electrode

In this article we compare the classical monopole mass filter of von Zahn and the monopole mass filter with a hyperbolic V-shaped electrode. The experimental results and those of computer simulation for both mass spectrometers are presented. We show that the replacement of a conventional 90 degrees V-shaped electrode by an electrode with a hyperbolic profile substantially improves the peak shape of any given mass, and increases the mass resolution by a factor of 3-4 and the abundance sensitivity by a factor of 100. The potential of high analytical performance combined with electroforming techniques for electrode manufacture indicate future practical uses of such instruments. Copyright 1999 John Wiley & Sons, Ltd.     

Incorporation and controlled release of silyl ether prodrugs from PRINT nanoparticles

Asymmetric bifunctional silyl ether (ABS) prodrugs of chemotherapeutics were synthesized and incorporated within 200 nm × 200 nm particles. ABS prodrugs of gemcitabine were selected as model compounds because of the difficulty to encapsulate a water-soluble drug within a hydrogel. The resulting drug delivery systems were degraded under acidic conditions and were found to release only the parent or active drug. Furthermore, changing the steric bulk of the alkyl substituents on the silicon atom could regulate the rate of drug release and, therefore, the intracellular toxicity of the gemcitabine-loaded particles. This yielded a family of novel nanoparticles that could be tuned to release drug over the course of hours, days, or months.     

Numerical simulation of microwave thawing using a coupled solver approach

Thawing of a frozen food product in a domestic microwave oven is numerically simulated using a coupled solver approach. The approach consists of a dedicated electromagnetic FDTD solver and a closely coupled UFVM multi-physics package. Two overlapping numerical meshes are defined; the food material and container were meshed for heat transfer and phase change solution, whilst the microwave oven cavity and waveguide were meshed for the microwave irradiation. The two solution domains were linked using a cross-mapping routine. This approach allowed the rotation of the food load to be captured. Power densities obtained on the structured FDTD mesh were interpolated onto the UFVM mesh for each timestep/turntable position. The UFVM solver utilised the power density data to advance the temperature and phase distribution solution. The temperature-dependant dielectric and thermo-physical properties of the food load were updated prior to revising the electromagnetic solution. Changes in thermal/electric properties associated with the phase transition were fully accounted for as well as heat losses from product to cavity. Two scenarios were investigated: a centric and eccentric placement on the turntable. Developing temperature fields predicted by the numerical solution are validated against experimentally obtained data. Presented results indicate the feasibility of fully coupled simulations of the microwave heating of a frozen product. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)