Improved sensitivity of headspace gas chromatography for organic aromatic compounds

Summary The effect of adding an electrolyte and increasing the temperature on the preconcentration of volatile compounds in headspace analysis has been investigated. Quantification of the interactive effects of temperature and addition of salt on the vapor concentration is of interest for the determination of trace organic impurities in pharmaceutical base materials. This study was undertaken to investigate the quantitative effects of the addition of salts alcohols, and acetone, and of increasing the temperature on the vapor concentrations and distribution coefficients of volatile aromatic compounds (benzene, toluene, ando-xylene). It was found that the concentration of aromatic compound residues in the headspace could be increased by adding an inert salt to the water, but this effect was not very significant because of the low orginal solubility of the aromatic compounds in water. The reverse effect can be achieved by use of polar organic additives; this can be explained by the high polarizability of aromatic compounds and their greater solubility in the presence of these solvents. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999.     

Catalyst-free grinding method: a new avenue for synthesis of 6-amino-3-methyl-4-aryl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile and DFT studies on the mechanistic pathway of this category of compounds

Research on Chemical Intermediates - A novel, efficient, one-pot, catalyst-free grinding procedure for synthesis of 6-amino-3-methyl-4-aryl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile is reported....     

Characterization of hydrophobic,oxidized porous silicon layer formed by anodic etching of n+-type silicon surface in a HF:C2H5OH:HCl:H2O2:H2O electrolyte for bio-application

Porous silicon (PS) has been prepared in the dark by anodic etching of n⁺-type (111) silicon substrate in a HF:HCl:C₂H₅OH:H₂O₂:H₂O electrolyte. The processed PS layer is characterized by means of photoluminescence (PL) spectroscopy, scanning electron microscope (SEM), water contact angle (CA) measurements, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and micro-Raman scattering. The CA of fresh PS layer is found to be ~142°. On aging at ambient conditions, the CA decreases gently to reach ~133° after 3 month, and then it is stabilized for a prolonged time of aging. The visible PL emission from the PS layer also exhibits a good stability against aging time. The FTIR and XPS measurements and analysis show that the stable aged PS layer has rather SiO₂-rich surface. The micro/nanostructure nature of the PS layer is revealed from SEM and micro-Raman results and correlated to CA results. Stable hydrophobic surface of oxidized PS layer is attractive for bio-applications. The efficiency of the produced PS layers as an entrapping template for specific immobilization of IgG2a antibody via physical absorption process is demonstrated.     

Nanostructuring-induced modification of optical properties of p-GaAs (1 0 0)

A pulsed anodic etching method has been utilized for nanostructuring of p-type GaAs (1 0 0) surface, using HCl-based solution as electrolyte. The resulting porous GaAs layer is characterized by atomic force microscopy (AFM), room temperature photoluminescence (PL), Raman spectroscopy and optical reflectance measurements. AFM imaging reveals that the porous GaAs layer is consisted of a pillar-like of few nm in width distributed between more-reduced size nanostructures. In addition to the “infrared” PL band of un-etched GaAs, a strong “green” PL band is observed in the etched sample. The broad visible PL band of a high-energy (3.82 eV) excitation is found to compose of two PL band attributed to excitons confinement in two different sizes distribution of GaAs nanocrystals. The quantum confinement effects in GaAs nanocrystallites is also evidenced from Raman spectroscopy through the pronounced appearance of the transverse optical (TO) phonon line in the spectra of the porous sample. Porosity-induced a significant reduction of the specular reflection, in the spectral range (400–800 nm), is also demonstrated.     

On homogenization and scaling limit of some gradient perturbations of a massless free field

We study the continuum scaling limit of some statistical mechanical models defined by convex Hamiltonians which are gradient perturbations of a massless free field. By proving a central limit theorem for these models, we show that their long distance behavior is identical to a new (homogenized) continuum massless free field. We shall also obtain some new bounds on the 2-point correlation functions of these models. This article was processed by the author using the LAT_EX style filepljour1 from Springer-Verlag.     

Characterization of nanostructured CuO–porous silicon matrix formed on copper-coated silicon substrate via electrochemical etching

A pulsed anodic etching method has been utilized for nanostructuring of a copper-coated p-type (100) silicon substrate, using HF-based solution as electrolyte. Scanning electron microscopy reveals the formation of a nanostructured matrix that consists of island-like textures with nanosize grains grown onto fiber-like columnar structures separated with etch pits of grooved porous structures. Spatial micro-Raman scattering analysis indicates that the island-like texture is composed of single-phase cupric oxide (CuO) nanocrystals, while the grooved porous structure is barely related to formation of porous silicon (PS). X-ray diffraction shows that both the grown CuO nanostructures and the etched silicon layer have the same preferred (220) orientation. Chemical composition obtained by means of X-ray photoelectron spectroscopic (XPS) analysis confirms the presence of the single-phase CuO on the surface of the patterned CuO–PS matrix. As compared to PS formed on the bare silicon substrate, the room-temperature photoluminescence (PL) from the CuO–PS matrix exhibits an additional weak ‘blue’ PL band as well as a blue shift in the PL band of PS (S-band). This has been revealed from XPS analysis to be associated with the enhancement in the SiO₂ content as well as formation of the carbonyl group on the surface in the case of the CuO–PS matrix.     

Application of carbon nanotubes modified with a Keggin polyoxometalate as a new sorbent for the hollow‐fiber micro‐solid‐phase extraction of trace naproxen in hair samples with fluorescence spectrophotometry using factorial experimental design

A sensitive technique to determinate naproxen in hair samples was developed using hollow‐fiber micro‐solid‐phase combined with fluorescence spectrophotometry. The incorporation of multi‐walled carbon nanotubes modified with a Keggin polyoxometalate into a silica matrix prepared by the sol–gel method was reported. In this research, the Keggin carbon nanotubes /silica composite was used in the pores and lumen of a hollow fiber as the hollow‐fiber micro‐solid‐phase extraction device. The device was used for the microextraction of the analyte from hair and water samples under the optimized conditions. An orthogonal array experimental design with an OA24 (4⁶) matrix was employed to optimize the conditions. The effect of six factors influencing the extraction efficiency was investigated: pH, salt, volume of donor and desorption phase, extraction and desorption time. The effect of each factor was estimated using individual contributions as response functions in the screening process. Analysis of variance was employed for estimating the main significant factors and their contributions in the extraction. Calibration curve plot displayed linearity over a range of 0.2–10 ng/mL with detection limits of 0.072 and 0.08 ng/mL for hair and aqueous samples, respectively. The relative recoveries in the hair and aqueous matrices ranged from 103–95%. The relative standard deviation for fiber‐to‐fiber repeatability was 3.9%.     

Density and rheological properties of different nanofluids based on diesel oil at different mass concentrations

Journal of Thermal Analysis and Calorimetry - In this study, various nanofluids were synthesized and investigated in order to evaluate the density and viscosity of carbon nanoparticles...     

Influence of bath temperatures on the wettability of copper films surface prepared by electroless plating method on beech wood

Copper films were coated on beech wood substrates by electroless plating method. The influence of bath temperature on the copper films properties was studied by varying the bath temperatures 25, 35, 45 and 55 °C. Scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), X‐ray diffraction (XRD) pattern, X‐ray photoelectron spectroscopy (XPS), micro Raman spectroscopy and contact angle measurements were used to both characterize the physical and chemical copper films properties and understand the influence of bath temperature on the wettability of copper surface. In our studies, we have found that the gained copper mass significantly increased at 55 °C. The crystalline nature of the coated copper was confirmed by XRD. The presence of Cu₂O and CuO was observed by XPS and micro Raman techniques, which confirms the oxidization of the coated copper surface. Also these characterization techniques have shown the big influence of bath temperature on the morphology, grain size, chemical composition and the film thickness of the coated copper. The wettability was highly influenced by increasing CuO on the coated copper, which is increased by the bath temperature. The contact angle measurements have demonstrated the influence of C―O, O―C?O and CuO components of the surface on the wettability of the samples. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparison of quantitative analytical methods in headspace gas chroamtography of residual solvents

Summary The aim of this work was to compare quantitative methods used for headspace gas chromatographic analysis of residual solvents in standard aqueous solutions and to apply the methods to the analysis of medicines. We found that all three quantitative methods (external standard, ESTD; internal standard, ISTD; and standard addition, ASTD) enable determination of the total amount of solute in the equilibrated system by analysis of defined volumes of headspace gas. The results showed that the ISTD method is more precise than ESTD and ASTD when there is no strong interaction between the residual solvents and the pharmaceutical base material. When, however, there is a strong polarpolar interaction between them, the ESTD and ISTD methods give worse results than the ASTD method, because the ASTD method can eliminate the matrix effect. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999