Synthesis of periphery-functionalized dendritic molecules using polylithiated dendrimers as starting material

A general method for the functionalization of Si-Cl terminated carbosilane dendritic molecules via organolithium or organomagnesium reagents is described. Quantitative exchange of the bromine atoms of 4-bromophenyl-functionalized dendrimers affords polylithiated species that are valuable starting materials for further functionalization, e.g., into pyridyl alcohols. The latter were successfully applied as catalyst precursors in a ruthenium-mediated ring-closure metathesis reaction.     

Oscillatory melting temperature of the vortex smectic phase in layered superconductors

We report on transport measurements of YBa 2Cu 3O (7-delta) single crystals with different oxygen contents in the geometry B, J ||ab (J perpendicularB). Our data show that the vortices become confined between the Cu-O planes below a well-defined temperature at which the effective size 2xi of the vortex core is approximately equal to the period of the Cu-O layers. This confinement strongly increases the vortex liquid freezing temperature. A new melting line is found separating a vortex liquid and a smectic phase, which shows an oscillatory field dependence reflecting differences between commensurate and incommensurate smectic states.     

Synthesis of Novel Chiral Diol Ligands for the Enantioselective Reactions

The chiral diols ((,(,((,((-Tetraaryl-1,3-dioxolane-4,5-dimethanols) have been used for the formation of cyclic titanates and similar derivatives of Mg, Al and Zr. These complexes of oxophilic metal centers were employed in catalytic and stiochiometric enantioselective reactions such as enantioselective addition reactions of carbon-centered nucleophiles to aldehydes1, [2+2] cycloadditions2, and Diels-Alder reactions3. So far, the two hydrogen atoms of all this type of diols are in trans form…     

The diffraction of elastic waves by an imperfect fusion bond

We consider diffraction by a semi-infinite crack located alonga fusion interface between two differing elastic media. Twotypes of crack, namely open and partially closed cracks, areinvestigated. An open crack is modelled by a stress-free contactboundary condition and a partially closed crack is modelledby a spring contact boundary condition. For the latter, thejump in the stress across the crack is assumed to be proportionalto the jump in the displacement across the crack. This situationarises in, for example, a K-weld where the fine grain of theparent material (for example, ferritic or forged austeniticsteel) is in stark contrast with the coarse-grained weld metal(for example, austenitic weld metal). In the metal weld thedirection of the grain axis varies through the metal. However,diffraction is a local phenomenon and so the austenitic steelis assumed to have a zonal axis so that it may be modelled bya transversely isotropic composite. The ferritic or forged austeniticsteel will be modelled as an isotropic material.     

Synthesis and characterization of an epoxy based thermoset containing a fluorinated thermoplastic

A novel fluorinated thermoplastic (FT) was synthesized from diglycidyl ether of bisphenol A (DGEBA), and 3‐(trifluoromethyl)aniline. FT was found to be miscible with DGEBA as shown by the existence of a single glass transition temperature (T_g) within the whole composition range. On the basis of several experimental techniques, it was found that upon heating etherification reaction takes place between FT and DGEBA. A DGEBA‐aromatic diamine (4,4′‐methylenebis(3‐chloro 2,6‐diethylaniline) formulation was modified with the FT. The influence of FT on the epoxy‐amine kinetics was investigated. Both structural parameters, gelation, and vitrification, were found to be affected by etherification reaction between epoxy and hydroxyls groups belonging to FT. The presence of ether linkages induced system stoichiometry modification. In addition, the curing conditions influence on FT migration towards the surface was studied on samples prepared with 20 wt % of modifier. SEM–EDX analysis confirmed that modified systems exhibits notable fluorine enrichment within the uppermost 200 μm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2781–2792, 2007     

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.     

Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B

Novel fluorescent materials were satisfactorily synthesized. With this aim, an epoxy resin based on diglycidyl ether of bisphenol A (DGEBA) was reacted with a laser dye, rhodamine B (RB), to achieve an epoxy-based prepolymer. Then, a diamine, m-xylylenediamine (MXDA), was used as hardener with the purpose of obtaining a crosslinked polymer. The curing conditions strongly influence the intended final properties and the optimization of the curing requires a reliable kinetic model. For that reason, this work presents the kinetic study of the polymerization of the epoxy resin by differential scanning calorimetry (DSC) in isothermal mode as well as by Fourier transform infrared spectroscopy (FTIR). DSC data were fitted using a Kamal autocatalytic equation. Conversion as a function of reaction time curves obtained by means of both techniques agreed well. In addition, the synthesized epoxy-based materials were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR) and their fluorescent properties were also analysed.     

基于箭形累积损伤的裂纹尖端力学:奇异性分级和多尺度分段

在适度的空间和时间尺度组合下,裂纹既可在几个月中蠕变几个纳米,也能在几秒钟内扩展10km.虽然裂纹的尖端没有实际的质量,但是它能通过激活周围的物质而处于高能量状态.依赖于材料的损伤方向,激活质量的减少和增加可发生在尺度转变之前或之后.每个尺度区的分段阈值被假定为与裂纹尖端速度的平方a~2和激活质量密度M的乘积有关:W=M_(↓↑)a_(↑↓)~2和D=M~(↓↑)a_(↑↓)~2.W和D分别被称为直接吸收和自耗散能量密度.正如下标/上标符号所示,激活的质量密度M_(↓↑)和M~(↓↑)与裂纹尖端速度a变化趋势相反,既可增加也可减少.a~2和M的互补效应隐含着常用于宇宙物理学建模的膨胀和/或收缩的物理过程.在用于尺度敏感的裂纹尖端的行为时,激活的质量密度有相同的解释.分段时的多尺度可以由…皮观、纳观、微观和宏观…组成.因此,形象地说,材料损伤过程可以通过裂纹扩展过程中非均匀的总体和局部能量的传递来模拟.疲劳裂纹扩展引起的材料损伤被用来阐释由大到小和由慢到快的尺度/时间序,热力学中的冷→热和有序→无序转换.这一过程正巧与宇宙演化的箭形方向相反,宇宙演化遵循小→大和快→慢,而热力学相反,遵循热→冷和无序→有序.为了表示由损伤萌生所造成的类裂缝型缺陷的不均匀性,提出了一个被称为裂纹尖端力学(crack tip mechanics,CTM)的新模式.涉及的范围是模拟原子列之间的界面裂纹或连续体中分叉的切口.假如需要的话,尺寸和时间的范围可以复盖从皮观到宏观甚至更大.虽然采用疲劳裂纹来说明CTM的基本原理,在宇宙物理学背景中与直接吸收和自耗散相关的膨胀和收缩的情况可以描述裂纹周围激活质量的行为,它们可看为能量的汇或源.奇异性被用来捕获能量的源或汇的特性,物理上,两者作为界面的一部分,从数学上看则是不连续的线的一部分.能量从一种形式变为另一种形式取决于能量吸收或耗散的箭形损伤时间,这之中牵涉到尺度分段和奇异性强度的联合应用.材料组分随时间的劣化是根据指定的设计寿命导出的,从而使材料的响应与加载率的时间历史匹配.2024-T3铝板的皮观/纳观/微观/宏观开裂模型用来说明什么地方可以增加结构的寿命部分.皮观/纳观/微观/宏观/结构系统的性能随时间劣化可以用9个尺度转变物理参数来描述:纳观/微观区有3个(μ_(na/mi)~*,σ_(na/mi)~*,d_(na/mi)~*),微观/宏观区有3个(μ_(mi/ma)~*,σ_(mi/ma)~*,d_(mi/ma)~*),皮观/纳观区有3个(μ_(pi/na)~*,σ_(pi/na)~*,d_(pi/na)~*).下标pi,na,mi,ma和struc分别表示皮观、纳观、微观、宏观和结构.只要知道两个相连的尺度敏感参数,在较低尺度的时间相关的局部物理参数就完成了分析连续体的形式论,虽然它们并不需要用实验来知道.更具体地说,根据皮观→纳观→微观→宏观分别有1.25/1.00/0.75/0.50的λ奇异性强度,皮观裂纹、纳观裂纹、微观裂纹和宏观裂纹的转变特征是从时间箭形的指定的寿命预期来确定的.附加的0.25强度的奇异性可用于结构元件.回想起来,λ=0.5相应于断裂力学中的应力分量与r~(0.5)成反比,r是与宏观裂纹尖端的距离.微观裂纹、纳观裂纹和皮观裂纹分别赋予r~(-0.75),r~(-1.0),r~(-1.25)的奇异性.箭形时间(以年为单位)取决于问题的定义.设备的关键部件可用1.5~±/2.5~±/3.5~±/5.5~±寿命分布和总寿命为13~±年(a)的皮观/纳观/微观/宏观尺度来设计运行.上标±表示多于或少于实际运行的时间.累进损伤被假定为发生在皮观→纳观→微观→宏观方向.同样的方案用于20年总寿命的2024-T3铝板的疲劳损伤,按照1.5~±/2.5~±/3.5~±/5.5~±/7.0~±的方式将它的寿命分布在皮观、纳观、微观、宏观和结构的尺度上,这样的指定只是满足在每个尺度范围内损伤内部材料结构所用的能量匹配,因此可以强制执行在总寿命的跨度内精确的时间相关的材料性能劣化过程.     

On the electric current from electrodes in a magnetized semiconductor film

The problem on the electric current from electrodes in a magnetizedsemiconductor film is reduced to the skew derivative problemfor the Laplace equation outside cuts in a plane. The problemfor the Laplace equation is studied under different conditionsat infinity, which have a certain physical meaning. With thehelp of potential theory, the skew derivative problem is reducedto a Fredholm integral equation of the second kind, which isuniquely solvable. The Neumann problem for the Laplace equationin the exterior of cuts in a plane is a particular case of ourproblem.