Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.     

Spectrum Slicing for Multiple Access Channels with Heterogeneous Services

Wireless mobile networks from the fifth generation (5G) and beyond serve as platforms for flexible support of heterogeneous traffic types with diverse performance requirements. In particular, the broadband services aim for the traditional rate optimization, while the time-sensitive services aim for the optimization of latency and reliability, and some novel metrics such as Age of Information (AoI). In such settings, the key question is the one of spectrum slicing: how these services share the same chunk of available spectrum while meeting the heterogeneous requirements. In this work we investigated the two canonical frameworks for spectrum sharing, Orthogonal Multiple Access (OMA) and Non-Orthogonal Multiple Access (NOMA), in a simple, but insightful setup with a single time-slotted shared frequency channel, involving one broadband user, aiming to maximize throughput and using packet-level coding to protect its transmissions from noise and interference, and several intermittent users, aiming to either to improve their latency-reliability performance or to minimize their AoI. We analytically assessed the performances of Time Division Multiple Access (TDMA) and ALOHA-based schemes in both OMA and NOMA frameworks by deriving their Pareto regions and the corresponding optimal values of their parameters. Our results show that NOMA can outperform traditional OMA in latency-reliability oriented systems in most conditions, but OMA performs slightly better in age-oriented systems.     

A note on King's fifth-order family of methods for solving equations

King's two-step fifth-order methods for solving equations require two function and two derivative evaluations per iteration. Using exactly the same information and composing two-point methods of order 2.732 with themselves, other two-step methods can be obtained with asymptotic convergence rates 7.464 which is better than the 5 of King.     

Synthesis and self assembly of eosin functionalized amphiphilic block‐random copolymers prepared by ring opening metathesis polymerization

Self assembly of block copolymers has gained considerable attention because of its potential use in various areas such as medical and biomedical applications, nanotechnology, and electronics. Herein, we present the synthesis and characterization of amphiphilic block‐random copolymers with a covalently incorporated pH‐sensitive dye, namely eosin. Ring opening metathesis polymerization was chosen for the preparation of well defined block copolymers and block‐random copolymers using a modified “2nd Generation Grubbs” initiator. The self assembly behavior of the block‐random copolymers in solution was studied by dynamic light scattering and small angle X‐ray scattering (SAXS). The influence of dye incorporation on the result of the self assembly process in methanol and ethanol was investigated and a subtle interplay of the nature of the selective solvent, the chain‐length of the block copolymer and the position of the dye within the polymer chain was established. Structural investigations using SAXS revealed a spherical shape and a core‐shell structure of exemplary block and block‐random copolymer micelles. UV–vis absorption and photoluminescence measurements revealed similar optical properties for polymer micelles in methanol compared to polymer solutions in THF. The pH‐sensitive behavior of the eosin dye was preserved within the micelles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 401–413, 2008     

Reactions of (benzamidomethyl)triethylammonium chloride with some inorganic nucleophiles in aqueous media

A variety of benzamidomethyl derivatives were prepared in water under alkaline conditions (pH>9) via reaction of (benzamidomethyl)triethylammonium chloride (1) with different inorganic nucleophiles. Reaction of 1 with hydroxylamine did not give the expected mono(benzamidomethyl)-hydroxylamine (3) but rather gave N,N- di(benzamidomethyl)hydroxylamine (2). Reactions of 1 with sodium azide and potassium cyanide gave benzamidomethyl azide (4a) and benzamidomethyl cyanide (4b) respectively. Potassium thiocyanate and sodium iodide reacted with 1, and the anion- exchanged products (benzamidomethyl)triethylammonium isothiocyanate (5a) and (benzamidomethyl)triethylammonium iodide (5b) were thus obtained. Cyanamide and potassium cyanate reacted readily with 1 and both gave the same mixture of di(benzamidomethyl)amine (7) and tri(benzamidomethyl)amine (8). All the reactions occurred smoothly, under mild conditions, to give the products in moderate to high yields.     

Epidermal lignin deposition in quinoa cotyledons in response to UV-B radiations

UV-B radiation (280-320 nm) is harmful to living organisms and has detrimental effects on plant growth, development and physiology. In this work we examined some mechanisms involved in plant responses to UV-B radiation. Seedlings of quinoa (Chenopodium quinoa Willd.) were exposed to variable numbers of UV-B radiation doses, and the effect on cotyledons was studied. We analyzed (1) cotyledons anatomy and chloroplasts ultrastructure; (2) peroxidase activity involved in the lignification processes; and (3) content of photosynthetic pigments, phenolic compounds and carbohydrates. Exposure to two UV-B doses induced an increase in the wall thickness of epidermal cells, which was associated with lignin deposition and higher activity of the peroxidase. The chloroplast ultrastructure showed an appearance typical of plants under shade conditions, likely in response to reduced light penetration into the mesophyll cells due to the screening effect of epidermal lignin deposition. Exposure to UV-B radiation also led to (1) enhancement in the level of phenolics, which may serve a protective function; (2) strong increase in the fructose content, a fact that might be related to higher requirement of erythrose-4P as a substrate for the synthesis of lignin and phenolics; and (3) reduction in the chlorophyll concentration, evidencing alteration in the photosynthetic system. We propose that the observed lignin deposition in epidermal tissues of quinoa is a resistance mechanism against UV-B radiation, which allows growing of this species in Andean highlands.     

Sixth order methods for solving equations

Summary A class of two-step, sixth order methods for solving equations is presented. An always-convergent hybrid algorithm is described. A comparison with other known methods is made.

---

Zusammenfassung Die Arbeit behandelt eine Klasse der Zweischritt-Methoden der sechsten Ordnung für die Lösung von Gleichungen. Beschrieben wurde ein Hybrider Algorithmus der in allen Fällen konvergiert. Es wird ein Vergleich mit anderen Methoden durchgeführt.

     

Crystal structure of 4,4-bipyridine-containing complexes of copper(II) nitrate with 1-[(2-Hydroxyethylimino)methyl]naphthalen-2-ol and 2-[(2-hydroxyethylimino)methyl]phenol

The crystal structures of (μ-4,4-bipyridine)-di(nitrato-1-[(2-hydroxyethylimino)methyl]naphthalen-2-olocopper (I) and catena-di(μ-4,4’-bipyridine)di(μ-4,4’-bipyridine)-di(nitrato-2-[2-(hydroxyethylimino) methyl]phenolocopper)diaquacopper(II) nitrate (II) were determined. In the crystal of I, each of the two copper atoms coordinates a singly deprotonated tridentate azomethine molecule, a nitrate ion, and bipyridine, which functions as a bridge between the central atoms. The copper coordination polyhedron is a slightly distorted tetragonal pyramid with the base formed by the imine and bipyridine nitrogen atoms and the phenol and alcohol oxygen atoms. The axial site in the pyramid is occupied by the oxygen atom of the monodentate nitrate groups. In the trinuclear structure II with C₂ crystal chemical symmetry, the terminal coordination unit is composed through copper coordination of monodeprotonated 2-[2-(hydroxyethylimino)methyl]phenol, bipyridine, and the nitrate anion. In the crystal, the trinuclear molecules form infinite ribbons along the z axis in which the pyridine molecules perform the bridging function. The central copper atom has an octahedral configuration formed by the nitrogen atoms of four 4,4’-bipyridine molecules and oxygen of two water molecules.