Precision improvement for the analysis of flavonoids in selected Thai plants by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method for the analyses of kaempferol in Centella asiatica and Rosa hybrids and rutin in Chromolaena odorata was developed. The optimization was performed on analyses of flavonoids (e.g., rutin, kaempferol, quercetin, myricetin, and apigenin) and organic carboxylic acids (e.g., ethacrynic acid and xanthene-9-carboxylic acid) by investigation of the effects of types and amounts of organic modifiers, background electrolyte concentrations, temperature, and voltage. Baseline separation (R(s) = 2.83) of the compounds was achieved within 10 min in 20 mM NaH2PO4 - Na2HPO4 (pH 8.0) containing 10% v/v ACN and 6% v/v MeOH using a voltage of 25 kV, a temperature of 30 degrees C, and a detection wavelength set at 220 nm. The application of the corrected migration time (t(c)), using ethacrynic acid as the single marker, was efficient to improve the precision of flavonoid identification (% relative standard deviation (RSD) = 0.65%). The method linearity was excellent (r2 > 0.999) over 50-150 microg/mL. Precision (%RSD < 1.66%) and recoveries were good (> 96% and %RSDs < 1.70%) with detection and quantitation limits of 2.23 and 7.14 microg/mL, respectively. Kaempferol in C. asiatica and R. hybrids was 0.014 g/100 g (%RSD = 0.59%) and 0.044 g/100 g (%RSD = 1.04%), respectively, and rutin in C. odorata was 0.088 g/100 g (%RSD = 0.06%).     

An n-channel two-dimensional covalent organic framework

Co-condensation of metallophthalocyanine with an electron-deficient benzothiadiazole (BTDA) block leads to the formation of a two-dimensional covalent organic framework (2D-NiPc-BTDA COF) that assumes a belt shape and consists of AA stacking of 2D polymer sheets. Integration of BTDA blocks at the edges of a tetragonal metallophthalocyanine COF causes drastic changes in the carrier-transport mode and a switch from a hole-transporting skeleton to an electron-transporting framework. 2D-NiPc-BTDA COF exhibits broad and enhanced absorbance up to 1000 nm, shows panchromatic photoconductivity, is highly sensitive to near-infrared photons, and has excellent electron mobility as high as 0.6 cm(2) V(-1) s(-1).     

Structure and electronic properties of deformed single-walled carbon nanotubes: quantum calculations

The electronic properties of single-walled carbon nanotubes (SWCNTs) can be modified by deforming their structure under high pressure. The aim of this study was to use quantum calculations to investigate one such property, the energy band gap, in relation to molecular structures of armchair and zigzag SWCNTs of various sizes and shapes deformed by applied forces. To model the increase in pressure, the degree of flatness (η) of the SWCNTs was adjusted as the primary parameter. The calculations gave accurate C-C bond lengths of the SWCNTs in their distorted states; these distortions significantly affected the electronic properties, especially the energy band gap of the SWCNTs. These results may contribute to a more refined design of new nano-electronic devices.     

Factorial design applied to a non-aqueous capillary electrophoresis method for the separation of beta-agonists

The aim of this work was to study the effects of both chemical and instrumental parameters on the separation of beta-agonists (clenbuterol (CLE), salbutamol (SAL) and terbutaline (TER)) by non-aqueous capillary electrophoresis (NACE) method. Due to the number of parameters involved and their interactions, factorial experimental designs (EDs) at two levels was applied to investigate the influence of experimental factors (ionic strength of the background electrolyte (BGE), organic solvent, injection time, voltage and temperature) in sets of several CE responses (resolution, (RS), number of theoretical plate (N), tailing factor (TF) and migration time (tm)). As a compromise between the four responses, the optimum condition was obtained in 18 mM ammonium acetate in methanol (MeOH):acetonitrile (ACN):glacial acetic acid (66:33:1%, v/v/v) using an injection time of 4 s, the voltage and the temperature of 28 kV and 24 degrees C, respectively. The proposed NACE permitted the baseline separation of the three beta-agonists within 10.5 min with good repeatability (%RSD < 3.5%) and linearity (r2 > 0.99). The developed method was applicable for the analysis of the beta-agonists in syrup and tablets and the NACE condition was compatible with a mass spectrometer detector.     

A sensitive non‐aqueous capillary electrophoresis‐mass spectrometric method for multiresidue analyses of β‐agonists in pork

Non‐aqueous capillary electrophoresis–mass spectrometry (NACE‐MS) was developed for trace analyses of β‐agonists (i.e. clenbuterol, salbutamol and terbutaline) in pork. The NACE was in 18 mM ammonium acetate in methanol–acetonitrile–glacial acetic acid (66 : 33 : 1, v/v/v) using a voltage of 28 kV. The hyphenation of CE with a time‐of‐flight MS was performed by electrospray ionization interface employing 5 mM ammonium acetate in methanol–water (80 : 20, v/v) as the sheath liquid at a flow rate of 2 μL/min. Method sensitivity was enhanced by a co‐injection technique (combination of hydrodynamic and electrokinetic injection) using a pressure of 50 mbar and a voltage of 10 kV for 12 s. The method was validated in comparison with HPLC–MS‐MS. The NACE‐MS procedure provided excellent detection limits of 0.3 ppb for all analytes. Method linearity was good (r² > 0.999, in a range of 0.8–1000 ppb for all analytes). Precision showed %RSDs of <17.7%. Sample pre‐treatment was carried out by solid‐phase extraction using mixed mode reversed phase/cation exchange cartridges yielding recoveries between 69 and 80%. The NACE‐MS could be successfully used for the analysis of β‐agonists in pork samples and results showed no statistical differences from the values reported by the Ministry of Public Health, Thailand using HPLC‐MS‐MS method. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity enhancement in capillary electrophoresis and their applications for analyses of pharmaceutical and related biochemical substances

This review aims to illustrate sensitivity enhancement methods in capillary electrophoresis (CE) and their applications for pharmaceutical and related biochemical substance analyses. The first two parts of the article describe the introduction and principle of CE. The main part focuses on strategies for sensitivity improvement in CE including detector and capillary technologies and preconcentration techniques. Applications of these techniques for pharmaceutical and biomedical substance analyses are surveyed during the years 2018–2021.     

Multilayer film assembled from charged derivatives of chitosan: physical characteristics and biological responses

Polyelectrolyte multilayer films were successfully assembled from each of the three charged derivatives of chitosan; N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC), N-succinyl chitosan (SCC) and N-sulfofurfuryl chitosan (SFC), paired with one of the two oppositely charged polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on surface-treated poly(ethylene terephthalate) (treated PET) substrates by alternate layer-by-layer adsorption. Surface coverage and wettability of the multilayer films were determined by AFM and water contact angle measurements, respectively. Analysis by quartz crystal balance with dissipation (QCM-D) has suggested that all multilayer films are relatively rigid and have a high water content associated within their structures, accounting for up to 85-90% (w/w) for films having 7-10 layers. In vitro cytocompatibility tests for the fibroblast-like L929 cell line revealed a slight dependency for cell adhesion and proliferation on the outermost layer. The multilayer film containing HTACC exhibited moderate antibacterial activity against E. coli and S. aureus. Bearing negative charges, the multilayer films terminating with SFC and having at least 10 layers were capable of suppressing the adsorption of plasma proteins and platelet adhesion at a comparable level to the multilayer film assembled from heparin, a well-known antithrombogenic polymer.