1-Alkyl-4-dialkylaminopyridinium Halides as Phase-Transfer Catalysts in Dichlorocarbene Reactions

 A series of 1-alkyl-4-dialkylaminopyridinium halides derived from 4-dimethylamino- and 4-morpholinopyridines were synthesized and tested as phase-transfer catalysts in three typical reactions of dichlorocarbene: dehydration of benzamide, N-formylation of diphenylamine, and dichlorocyclopropanation of styrene. The catalytic performance of the above compounds was found comparable or higher than that of conventional quaternary ammonium catalysts. The influence of catalyst structure on the reactivity was evaluated.     

Carbapenem and penem antibiotics. VI. Synthesis and antibacterial activity of 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl 1-methylcarbapenems

The synthesis and antibacterial activity of the 1-methylcarbapenems, 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl derivatives having a 6-[(R)-1-hydroxyethyl] side chain, are described. The introduction of a methyl substituent at the C-1 position was accomplished by a newly developed procedure using crotyl halides and zinc dust. The 2-hydroxymethyl carbapenems as key intermediates allowed an easy entry into the preparation of title carbapenems.     

Cyclobutane-based peptides/terpyridine conjugates: Their use in metal catalysis and as functional organogelators

Two new conjugates, hcptpyDP and hcptpyTP, of a terpyridine derivative incorporating artificial peptide moieties, have been synthesized and their use in the preparation of metal catalysts and organogelators has been investigated. Ru(II) complexes derived from these ligands showed electrochemical behavior and activity as catalysts in the epoxidation of olefins similar to that of Beller's catalyst. As organogelators, these conjugates were able to gelate a variety of solvents, from toluene to methanol, with satisfactory mgc (minimum gelation concentration) values. The presence of 4′-(4-carboxy)phenylterpyridine (hcptpy) moiety allows tuning the gelling properties and also influences the supramolecular self-assembling mode to produce chiral aggregates with respect to parent peptides DP and TP. In the case of the conjugates, π?π interactions provided by the aromatic moieties cooperate with inter-molecular hydrogen bonding between NH and CO in the amide groups. Further properties of peptide/terpyridine conjugates are under investigation in view of future applications.     

Voltammetry coupled to mass spectrometry in the presence of isotope O labeled water for the prediction of oxidative transformation pathways of activated aromatic ethers: Acebutolol

The coupling between an electrochemical cell (EC) and a mass spectrometer (MS) is a useful screening tool (EC-MS) to study the oxidative transformation pathways of various electroactive species. For that purpose, we showed that the EC-MS method, carried out in the presence and absence of isotope ¹⁸O labeled water leads not only to a fast identification of oxidation products but also leads to a fast elucidation of the mechanism pathway reaction. We examined herein the case of the electrochemical hydrolysis of activated aromatic ether. Acebutolol (β-blockers) was selected herein as model of activated aromatic ether, and its electrochemical oxidation was examined in both the presence and absence of isotope ¹⁸O labeled water. To elucidate electrochemical hydrolysis pathway reaction: O-dealkylation or O-dealkoxylation, our approach was used to prove its applicability. The electrochemical oxidation mechanism was then elucidated showing an O-dealkoxylation reaction. In addition, density functional theory (DFT) calculations fully support the experimental conclusions.     

Divergent synthetic routes to biologically relevant types of compounds: chiral polyfunctional γ-lactams and amino acids

Divergent and versatile synthetic routes leading to the title compounds are described. They start from a common chiral precursor derived from (−)-(S)-verbenone and afford polyfunctional γ-lactams and γ- and ε-amino acids. The cyclobutane moiety in these molecules acts as a chiral and polyfunctional platform providing stereogenic centres with unambiguous absolute configuration that control the chirality of the newly produced asymmetric carbons. Furthermore, it affords functional groups and carbon chains suitable not only to create the basic skeleton of the desired products but additional functional groups. These features confer on these derivatives a great versatility for further uses in the development of new drugs and as synthetic building blocks.     

Selective Monofunctionalization Enabled by Reaction‐History‐Dependent Communication in Catalytic Rotaxanes

Selective monofunctionalization of substrates with distant, yet equally reactive functional groups is difficult to achieve, as it requires the second functional group to selectively modulate its reactivity once the first functional group has reacted. We now show that mechanically interlocked catalytic rings can effectively regulate the reactivity of stoppering groups in rotaxanes over a distance of about 2 nm. Our mechanism of communication is enabled by a unique interlocked design, which effectively removes the catalytic rings from the substrates by fast dethreading as soon as the first reaction has taken place. Our method not only led to a rare example of selective monofunctionalization, but also to a “molecular if function”. Overall, the study presents a way to get distant functional groups to communicate with each other in a reaction‐history‐dependent manner by creating linkers that can ultimately perform logical operations at the molecular level.     

Experimental study of the retention properties of a cyclo olefin polymer pillar array column in reversed-phase mode

Experimental measurements to study the retention capacity and band broadening under retentive conditions using micromachined non-porous pillar array columns fabricated in cyclo olefin polymer are presented. In particular, three columns with different depths but with the same pillar structure have been fabricated via hot embossing and pressure-assisted thermal bonding. Separations of a mixture of four coumarins using varying mobile phase compositions have been monitored to study the relation between the retention factor and the ratio of organic solvent in the aqueous mobile phase. Moreover, the linear relation between the retention and the surface/volume ratio predicted in theory has been observed, achieving retention factors up to k=2.5. Under the same retentive conditions, minimal reduced plate height values of h(min)=0.4 have been obtained at retention factors of k=1.2. These experimental results are compared with the case of non-porous and porous silicon pillars. Similar results for the plate heights are achieved while retention factors are higher than the non-porous silicon column and considerably smaller than the porous pillar column, given the non-porous nature of the used cyclo olefin polymer. The feasibility of using this polymer column as an alternative to the pillar array silicon columns is corroborated.     

Experimental study of the depth influence on the band broadening effect in a cyclo-olefin polymer column containing an array of ordered pillars

An experimental study of a micromachined non-porous pillar array column performance under non-retentive conditions is presented. The same pillar structure has been fabricated in cyclo-olefin polymer (COP) chips with three different depths via hot embossing and pressure-assisted thermal bonding. The influence of the depth on the band broadening along with the already known contribution arising from the top and bottom cover plates has been studied. The experimental results exhibit reduced plate heights as low as 0.2, which are in agreement with the previous experimental work. Moreover, the constant values of the reduced Van Deemter expression are also in accordance with the previous studies. A more exhaustive study of the C-term band broadening is also presented, showing that comparing the space between the pillars with different open tubular rectangular channels offers a good estimation of the C-term band broadening that is obtained experimentally. These experimental results, hence, confirm that micromachined pillar array columns fabricated in COP can achieve the same performance as the ones fabricated in silicon for the presently studied pillar channel design.     

New practical tools for the implementation and use of ultrafast 2D NMR experiments

Ultrafast (UF) 2D NMR is a very promising methodology enabling the acquisition of 2D spectra in a single scan. In the last few years, the analytical performance of UF 2D NMR has been highly increased, consequently maximizing its range of applications. However, its implementation and use by non‐specialists are far from being straightforward, because of the specific acquisition and processing procedures and parameters characterizing UF NMR. To make this methodology implementable and applicable by non‐specialists, we developed a simple routine capable of translating conventional parameters (spectral widths and transmitter frequencies) into specific UF parameters (gradient and chirp pulse parameters). This macro was subsequently implemented in a Web page, which is available for external users. Although the algorithm was designed for two widely used 2D experiments, COSY and HSQC, it can easily be extended to any other pulse sequence. The robustness of this routine was verified successfully on a variety of small molecules. We believe that this tool will eliminate much of the technical difficulties related to UF 2D NMR and will make the technique accessible to a wider audience of organic and analytical chemists. Copyright © 2013 John Wiley & Sons, Ltd.     

"Multi-scan single shot" quantitative 2D NMR: a valuable alternative to fast conventional quantitative 2D NMR

Quantitative Ultrafast (UF) 2D NMR is a very promising methodology enabling the acquisition of 2D spectra in a single scan. The analytical performances of UF 2D NMR have been highly increased in the last few years, however little is known about the sensitivity of ultrafast experiments versus conventional 2D NMR. A fair and relevant comparison has to consider the Signal-to-Noise Ratio (SNR) per unit of time, in order to answer the following question: for a given experiment time, should we run a conventional 2D experiment or is it preferable to accumulate ultrafast acquisitions? To answer this question, we perform here a systematic comparison between accumulated ultrafast experiments and conventional ones, for different experiment durations. Sensitivity issues and other analytical aspects are discussed for the COSY experiment in the context of quantitative analysis. The comparison is first carried out on a model sample, and then extended to model metabolic mixtures. The results highlight the high analytical performance of the "multi-scan single shot" approach versus conventional 2D NMR acquisitions. This result is attributed to the absence of t(1) noise in spatially encoded experiments. The multi-scan single shot approach is particularly interesting for quantitative applications of 2D NMR, whose occurrence in the literature has been greatly increasing in the last few years.